{"title":"B\u0026T Industries","description":"\u003cp\u003eThe official B\u0026amp;T Industries range: Atlas bipods, Accu-Shot monopods and genuine B\u0026amp;T rails, clamps, feet and spare parts. B\u0026amp;T Industries builds the Atlas bipod line that has become a default fitting on British precision, F-Class and stalking rifles.\u003c\/p\u003e\n\u003cp\u003eWithin the range, the \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas line\u003c\/a\u003e covers the V8, PSR, CAL, Super CAL and 5-H series, while the \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot rear monopods\u003c\/a\u003e handle the back of the rifle with Quick Knob elevation control. Genuine feet, rails, leg extensions and spares are in \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e. Cross-shop the Made in USA \u003ca href=\"\/collections\/accu-tac\"\u003eAccu-Tac\u003c\/a\u003e range and \u003ca href=\"\/collections\/area-419\"\u003eArea 419\u003c\/a\u003e ARCALOCK hardware, or see everything that steadies a rifle under \u003ca href=\"\/collections\/bipods-monopods\"\u003ebipods and monopods\u003c\/a\u003e. Running an ARCA-Swiss forend? Start with \u003ca href=\"\/collections\/arca-bipods\"\u003eARCA bipods and clamps\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eBy discipline: a V8 or PSR suits \u003ca href=\"\/collections\/deer-stalking-scopes\"\u003edeer stalking\u003c\/a\u003e and general precision work off a bipod, the wide-stance models belong in \u003ca href=\"\/collections\/f-class-benchrest-bipods\"\u003eF-Class and benchrest\u003c\/a\u003e, and a rear monopod is what steadies a heavy rifle in the last few seconds before the shot.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTwo-screw, No Clamp or ADM lever?\u003c\/b\u003e\u003cbr\u003eThe two-screw mount bolts to a Picatinny rail, the No Clamp version comes with no mount at all so you can fit your own, and the ADM lever is quick-detach. Compare in \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipods\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWhy do Atlas legs index?\u003c\/b\u003e\u003cbr\u003eAtlas legs lock at several positions either side of vertical, which lets you set the rifle up on uneven ground rather than only on the flat. See \u003ca href=\"\/collections\/rifle-bipods\"\u003erifle bipods\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"atlas-bipod-bt80-m-lok-flush-cup-rail","title":"Atlas Bipod BT80 M-LOK Flush Cup Rail","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT80 M-LOK Flush Cup Rail\u003c\/b\u003e, part number BT80 from B\u0026amp;T Industries, adds a MIL-STD-1913 Picatinny rail section with integrated flush cup sling sockets to any M-LOK compatible handguard, forend or buttstock. It gives bipod mounting and QD sling attachment in a single fitting.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eIf you only need the rail, the shorter \u003ca href=\"\/products\/atlas-bipod-bt73-m-lok-picatinny-rail\"\u003eAtlas BT73 M-LOK Picatinny rail\u003c\/a\u003e is the simpler fitting. If you run an NC (No Clamp) Atlas bipod, the \u003ca href=\"\/products\/atlas-bipod-bt70-m-lok-adaptor\"\u003eAtlas BT70 M-LOK adaptor\u003c\/a\u003e mounts it straight into the M-LOK slot with no rail. The flush cup stud fitting itself is the \u003ca href=\"\/products\/bt-industries-bt54-flush-cup-stud\"\u003eB\u0026amp;T BT54 flush cup stud\u003c\/a\u003e. Bipods to go on it are in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eM-LOK rifles running push-button QD sling swivels\u003c\/li\u003e\n\u003cli\u003ePractical and service rifle builds where sling and bipod share a forend\u003c\/li\u003e\n\u003cli\u003eStalking rifles carried on a sling and shot off a bipod\u003c\/li\u003e\n\u003cli\u003eCleaner setups with fewer separate fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e M-LOK to MIL-STD-1913 Picatinny rail with integrated flush cups\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e M-LOK compatible hand guards, forends and buttstocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSling:\u003c\/b\u003e Flush cup sockets accept push-button QD sling swivels and sit flush so nothing snags\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTakes:\u003c\/b\u003e Two-screw and ADM lever-mount Atlas bipods, and Picatinny monopods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM-LOK to 1913 Picatinny rail with flush cups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM-LOK compatible hand guards, forends and buttstocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSling Interface\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFlush cup sockets for push-button QD swivels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAccepts\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAny MIL-STD-1913 Picatinny bipod or monopod mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT80 \/ BT80 \/ 810040220760\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT80 M-LOK flush cup rail with fixings\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas rail is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat are the flush cups on the Atlas BT80 for?\u003c\/b\u003e\u003cbr\u003eThe flush cups accept push-button QD sling swivels and sit flush with the rail, so nothing protrudes to snag when the sling is removed.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich bipods will fit the Atlas BT80?\u003c\/b\u003e\u003cbr\u003eAny bipod with a standard MIL-STD-1913 Picatinny clamp will fit, including two-screw Atlas models, ADM lever models and Accu-Shot Precision Rail Monopods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the Atlas BT80 KeyMod compatible?\u003c\/b\u003e\u003cbr\u003eNo — the BT80 is an M-LOK fitting only and will not mount to a KeyMod handguard.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShould I choose the BT80 or the BT73?\u003c\/b\u003e\u003cbr\u003eChoose the BT80 if you want sling attachment and bipod mounting in one fitting, and the BT73 if you only need a short Picatinny rail section without flush cups.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT80 M-LOK flush cup rail with its fixings.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307902603638,"sku":"BT80","price":44.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt80-m-lok-flush-cup-rail-1.jpg?v=1785269727"},{"product_id":"atlas-bipod-bt19-accuracy-international-spigot-aais","title":"Atlas Bipod BT19 Accuracy International Spigot (AAIS)","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT19 Accuracy International Spigot (AAIS)\u003c\/b\u003e, part number BT19 from B\u0026amp;T Industries, lets any NC (No Clamp) Atlas bipod mount directly to the Accuracy International spigot system — the factory forend interface on AI rifles. It keeps the AI forend as the manufacturer built it, with no rail bolted on.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT19 mounts NC bipods only. To run a two-screw or ADM lever Atlas bipod on the AI spigot, add the \u003ca href=\"\/products\/atlas-bipod-bt20-aais-1913-rail-set\"\u003eBT20 AAIS 1913 rail set\u003c\/a\u003e, or take the ready-made quick-detach route with the \u003ca href=\"\/products\/atlas-bipod-bt43-leveraged-rail\"\u003eAtlas BT43 leveraged rail\u003c\/a\u003e, which is the BT20-B bottom rail supplied with an ADM-170-S lever installed. For M-LOK handguards instead of an AI spigot, use the \u003ca href=\"\/products\/atlas-bipod-bt70-m-lok-adaptor\"\u003eAtlas BT70 M-LOK adaptor\u003c\/a\u003e. NC bipods are in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAccuracy International rifles with the factory spigot forend\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting on an AI platform\u003c\/li\u003e\n\u003cli\u003eTarget, F-Class and practical rifle with an AI-stocked rifle\u003c\/li\u003e\n\u003cli\u003eKeeping the AI forend clean and free of bolt-on rails\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Accuracy International spigot mount (AAIS) for Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e All NC (No Clamp) Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible bipods:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt10-nc-v8-no-clamp\"\u003eBT10-NC V8\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt46-nc-psr-no-clamp\"\u003eBT46-NC PSR\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt47-nc-psr-tall-no-clamp\"\u003eBT47-NC PSR Tall\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt65-nc-cal-no-clamp\"\u003eBT65-NC CAL\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt69-nc-cal-tall-no-clamp\"\u003eBT69-NC CAL Tall\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt72-nc-super-cal-no-clamp\"\u003eBT72-NC Super CAL\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt35-nc-5-h-no-clamp\"\u003eBT35-NC 5-H\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRail option:\u003c\/b\u003e Works with the \u003ca href=\"\/products\/atlas-bipod-bt20-aais-1913-rail-set\"\u003eBT20\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt20-b-aais-bottom-rail\"\u003eBT20-B\u003c\/a\u003e AAIS rails to add 1913 mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAccuracy International spigot mount (AAIS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAll NC (No Clamp) Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRail Options\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT20 AAIS 1913 rail set; BT20-B AAIS bottom rail; BT43 leveraged rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT19 \/ BT19 \/ 810040220418\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT19 AAIS spigot\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas mount is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods fit the BT19 spigot?\u003c\/b\u003e\u003cbr\u003eThe BT19 fits every NC (No Clamp) Atlas bipod, which is the BT10-NC, BT46-NC, BT47-NC, BT35-NC, BT65-NC, BT69-NC and BT72-NC.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill a two-screw or ADM lever Atlas bipod fit the BT19?\u003c\/b\u003e\u003cbr\u003eNot directly — those bipods carry a Picatinny clamp, so you need the BT20 AAIS rail set to add 1913 rails to the spigot, after which two-screw and lever-mount bipods can be used.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich rifles does the BT19 suit?\u003c\/b\u003e\u003cbr\u003eThe BT19 is for Accuracy International rifles that use the spigot forend interface, so check your specific model's forend before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs there a quick-detach version already built?\u003c\/b\u003e\u003cbr\u003eYes — the BT43 leveraged rail is the BT20-B bottom rail supplied with an ADM-170-S lever already installed, which gives a ready-made quick-detach interface on a spigot-equipped rifle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT19 Accuracy International spigot (AAIS).\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307902636406,"sku":"BT19","price":79.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt19-accuracy-international-spigot-aais-1.jpg?v=1785269762"},{"product_id":"atlas-bipod-bt69-nc-cal-tall-no-clamp","title":"Atlas Bipod BT69-NC CAL Tall No Clamp","description":"\u003cp\u003eThe \u003cb\u003eAtlas Bipod BT69-NC CAL Tall No Clamp\u003c\/b\u003e, part number BT69-NC from B\u0026amp;T Industries, is the tall-leg CAL (Cant And Loc) Atlas bipod supplied with no clamp fitted. Its 1.100 inch (27.9 mm) two-hole pattern with 10\/32 threads accepts the BT19 Accuracy International spigot, the BT70 M-LOK adaptor or any 17S-size lever mount such as the ADM-170-S.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\"NC\" means No Clamp. The \u003ca href=\"\/products\/atlas-bipod-bt69-cal-tall-with-two-screw-picatinny-mount\"\u003eBT69 CAL Tall with the two-screw Picatinny clamp\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt69-lw17-cal-tall-with-adm-170-s-lever-qd-mount\"\u003eBT69-LW17 CAL Tall with the ADM-170-S lever\u003c\/a\u003e arrive with a mount already fitted. At standard height, the \u003ca href=\"\/products\/atlas-bipod-bt65-nc-cal-no-clamp\"\u003eAtlas BT65-NC CAL bipod\u003c\/a\u003e shares this exact mounting pattern with shorter legs. The mount can be changed later with the \u003ca href=\"\/products\/atlas-bipod-bt6569ml-cal-upgrade-mount\"\u003eBT6569ML CAL upgrade mount\u003c\/a\u003e. Compare the family in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e and the wider \u003ca href=\"\/collections\/rifle-bipods\"\u003eUK rifle bipod selection\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHill and woodland stalking over heather, bracken and long grass\u003c\/li\u003e\n\u003cli\u003eAccuracy International rifles running the factory spigot forend\u003c\/li\u003e\n\u003cli\u003eM-LOK handguards, bolting straight into a rail slot with the BT70 adaptor\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooters fitting an ARCA or lever clamp of their own\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Atlas CAL Tall (Cant And Loc) — lockable cant with extended legs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e None fitted — 1.100 in (27.9 mm) two-hole pattern, 10\/32 threads, 17S-size\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpigot option:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt19-accuracy-international-spigot-aais\"\u003eBT19 Accuracy International spigot (AAIS)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eM-LOK option:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt70-m-lok-adaptor\"\u003eBT70 M-LOK adaptor\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLever option:\u003c\/b\u003e \u003ca href=\"\/products\/american-defense-adm-170-s-picatinny-lever-mount-atlas-bipod\"\u003eAmerican Defense ADM-170-S Picatinny lever mount\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e Atlas quick-change system — \u003ca href=\"\/products\/atlas-bipod-bt32-standard-rubber-feet\"\u003eBT32 standard rubber feet\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 quick-change ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider stainless steel cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSeries\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas CAL Tall (Cant And Loc, extended legs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNone fitted — accepts BT19 spigot, BT70 M-LOK adaptor or any 17S-size clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount Pattern\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.100 in (27.9 mm) two-hole pattern, 10\/32 threads — 17S-size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCant\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePositive, lockable cant control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatible Feet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas quick-change: BT32 rubber, BT23 ski, BT74 Raider cleat (V8 \/ PSR \/ CAL pattern)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLeg Extensions\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT22 fixed 3 inch (76 mm); BT85 adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePouch\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30 tall Atlas bipod pouch (standard and tall height)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT69-NC \/ BT69-NC \/ 810040220210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1× Atlas BT69-NC CAL Tall bipod, no clamp fitted\u003c\/li\u003e\n\u003cli\u003eMount installation screws (10-32 flat socket)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bipod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich mount does the Atlas BT69-NC need?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT69-NC is supplied with no clamp, so it needs a mount bought separately: the BT19 Accuracy International spigot, the BT70 M-LOK adaptor, or any 17S-size lever clamp such as the American Defense ADM-170-S.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Atlas BT69-NC clamp directly to a Picatinny rail?\u003c\/b\u003e\u003cbr\u003eNo — the BT69-NC has no clamp of its own and cannot attach to a Picatinny rail until a 17S-size mount is bolted to it; if you want it ready to use, choose the \u003ca href=\"\/products\/atlas-bipod-bt69-cal-tall-with-two-screw-picatinny-mount\"\u003eBT69 with the two-screw clamp\u003c\/a\u003e or the \u003ca href=\"\/products\/atlas-bipod-bt69-lw17-cal-tall-with-adm-170-s-lever-qd-mount\"\u003eBT69-LW17 with the ADM-170-S lever\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the mounting hole pattern on the Atlas BT69-NC?\u003c\/b\u003e\u003cbr\u003eThe BT69-NC uses a 1.100 inch (27.9 mm) two-hole pattern with 10\/32 threads, which is the 17S size, so any 17S-size mount will bolt straight to it.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the difference between the Atlas BT69-NC and the BT65-NC?\u003c\/b\u003e\u003cbr\u003eThey share the same CAL build and the same no-clamp mounting pattern, and the difference is leg length: the BT69-NC is the Tall version with longer legs, and the BT65-NC is the standard height.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eCan the Atlas BT69-NC be made ARCA compatible?\u003c\/b\u003e\u003cbr\u003eNo Atlas bipod in this range is natively ARCA-Swiss, but the BT69-NC is straightforward to convert because it is supplied clamp-free — fit an ARCA clamp such as the \u003ca href=\"\/products\/area-419-arcalock-clamp-atlas-bipod\"\u003eArea 419 ARCALOCK clamp for Atlas bipods\u003c\/a\u003e from our \u003ca href=\"\/collections\/arca-bipods\"\u003eARCA bipods and clamps\u003c\/a\u003e collection.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT69-NC CAL Tall bipod with no clamp fitted, plus the 10-32 flat socket mount installation screws.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307902734710,"sku":"BT69-NC","price":289.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt69-nc-cal-tall-no-clamp-1.jpg?v=1785271503"},{"product_id":"atlas-bipod-bt69-lw17-cal-tall-with-adm-170-s-lever-qd-mount","title":"Atlas Bipod BT69-LW17 CAL Tall with ADM-170-S Lever QD Mount","description":"\u003cp\u003eThe \u003cb\u003eAtlas Bipod BT69-LW17 CAL Tall\u003c\/b\u003e, part number BT69-LW17 from B\u0026amp;T Industries, is the tall-leg CAL (Cant And Loc) Atlas bipod supplied with the American Defense ADM-170-S quick-detach lever mount fitted. Extra leg height for shooting over cover, combined with a lever that clamps to any MIL-STD-1913 Picatinny rail in seconds.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis is the quick-detach Tall CAL. The \u003ca href=\"\/products\/atlas-bipod-bt69-cal-tall-with-two-screw-picatinny-mount\"\u003eBT69 CAL Tall with the two-screw Picatinny clamp\u003c\/a\u003e bolts down permanently, and the \u003ca href=\"\/products\/atlas-bipod-bt69-nc-cal-tall-no-clamp\"\u003eBT69-NC CAL Tall supplied with no clamp\u003c\/a\u003e waits for a 17S-size mount of your own. At standard height, the \u003ca href=\"\/products\/atlas-bipod-bt65-lw17-cal-with-adm-170-s-lever-qd-mount\"\u003eAtlas BT65-LW17 CAL bipod\u003c\/a\u003e is the same combination with shorter legs. The lever is stocked separately as the \u003ca href=\"\/products\/american-defense-adm-170-s-picatinny-lever-mount-atlas-bipod\"\u003eAmerican Defense ADM-170-S Picatinny lever mount\u003c\/a\u003e. Compare the range in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHill and woodland stalking over heather, bracken and long grass\u003c\/li\u003e\n\u003cli\u003eStalkers who move one bipod between rifles and case the rifle for the walk in\u003c\/li\u003e\n\u003cli\u003eShooting from barricades and on steep ground\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style stages with awkward positions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Atlas CAL Tall (Cant And Loc) — lockable cant with extended legs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e American Defense ADM-170-S quick-detach lever for MIL-STD-1913 Picatinny rail, supplied fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLever tension:\u003c\/b\u003e Adjustable clamping nut, so lever tension can be tuned to your own rail\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e Atlas quick-change system — \u003ca href=\"\/products\/atlas-bipod-bt32-standard-rubber-feet\"\u003eBT32 standard rubber feet\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 quick-change ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider stainless steel cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLeg extensions:\u003c\/b\u003e Accepts the \u003ca href=\"\/products\/atlas-bipod-bt22-3-inch-leg-extensions\"\u003eBT22 3 inch (76 mm) leg extensions\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt85-adjustable-leg-extensions\"\u003eBT85 adjustable leg extensions\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarry:\u003c\/b\u003e Fits the \u003ca href=\"\/products\/atlas-bipod-bt30-tall-bipod-pouch-coyote-brown\"\u003eBT30 tall Atlas bipod pouch in Coyote Brown\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSeries\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas CAL Tall (Cant And Loc, extended legs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAmerican Defense ADM-170-S lever quick-detach, MIL-STD-1913 Picatinny, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount Pattern\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.100 in (27.9 mm) two-hole pattern, 10\/32 threads — 17S-size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCant\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePositive, lockable cant control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatible Feet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas quick-change: BT32 rubber, BT23 ski, BT74 Raider cleat (V8 \/ PSR \/ CAL pattern)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLeg Extensions\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT22 fixed 3 inch (76 mm); BT85 adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePouch\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30 tall Atlas bipod pouch (standard and tall height)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT69-LW17 \/ BT69-LW17 \/ 810040220227\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1× Atlas BT69 CAL Tall bipod\u003c\/li\u003e\n\u003cli\u003e1× American Defense ADM-170-S lever quick-detach mount, fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bipod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich mount does the Atlas BT69-LW17 need?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT69-LW17 needs no separate mount, because the American Defense ADM-170-S quick-detach lever is supplied already fitted; the rifle only needs a MIL-STD-1913 Picatinny rail section for the lever to clamp onto.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the difference between the Atlas BT69 and the BT65?\u003c\/b\u003e\u003cbr\u003eThey are the same CAL bipod build with the same mounting pattern, and the difference is leg length: the BT69 is the Tall version with longer legs for extra ground clearance, and the BT65 is the standard height.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the Atlas BT69-LW17 return to the same position after removal?\u003c\/b\u003e\u003cbr\u003eThe ADM-170-S lever mount is designed for repeatable refitting to the same rail slot, so returning it to the slot it came from is what keeps the fit consistent, and the clamping nut can be adjusted to suit your rail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich pouch fits the Atlas BT69-LW17 CAL Tall?\u003c\/b\u003e\u003cbr\u003eThe BT30 tall Atlas bipod pouch is the one to choose, because it is cut to take both standard and tall height V8, PSR and CAL bipods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich feet fit the Atlas BT69-LW17 CAL Tall bipod?\u003c\/b\u003e\u003cbr\u003eIt takes the V8, PSR and CAL pattern Atlas quick-change feet — BT32 standard rubber feet, BT23 quick-change ski feet and BT74 Raider stainless steel cleat feet — each sold as a pair and listed in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT69 CAL Tall bipod with the American Defense ADM-170-S lever quick-detach mount already fitted.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307902767478,"sku":"BT69-LW17","price":354.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt69-lw17-cal-tall-with-adm-170-s-lever-qd-mount-1.jpg?v=1785271688"},{"product_id":"atlas-bipod-bt69-cal-tall-with-two-screw-picatinny-mount","title":"Atlas Bipod BT69 CAL Tall with Two-Screw Picatinny Mount","description":"\u003cp\u003eThe \u003cb\u003eAtlas Bipod BT69 CAL Tall\u003c\/b\u003e, part number BT69 from B\u0026amp;T Industries, is the tall-leg CAL (Cant And Loc) Atlas bipod supplied with the two-screw MIL-STD-1913 Picatinny clamp already fitted. The longer legs lift the rifle clear of cover and vegetation, and the CAL mechanism locks the cant positively so the rifle stays where you level it.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT69 is the Tall CAL; the \u003ca href=\"\/products\/atlas-bipod-bt65-cal-with-two-screw-picatinny-mount\"\u003eBT65 CAL at standard height\u003c\/a\u003e is the same bipod with shorter legs. Within the BT69 family only the mount changes: the \u003ca href=\"\/products\/atlas-bipod-bt69-lw17-cal-tall-with-adm-170-s-lever-qd-mount\"\u003eBT69-LW17 CAL Tall with the ADM-170-S quick-detach lever\u003c\/a\u003e comes off in seconds, and the \u003ca href=\"\/products\/atlas-bipod-bt69-nc-cal-tall-no-clamp\"\u003eBT69-NC CAL Tall supplied with no clamp\u003c\/a\u003e takes a 17S-size mount of your own. The tall PSR alternative, which pans freely, is the \u003ca href=\"\/products\/atlas-bipod-bt47-nc-psr-tall-no-clamp\"\u003eAtlas BT47-NC PSR Tall bipod\u003c\/a\u003e. See them together in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHill and woodland stalking over heather, bracken and long grass\u003c\/li\u003e\n\u003cli\u003eShooting from barricades, over cover and on steep ground\u003c\/li\u003e\n\u003cli\u003eF-Class, benchrest and target rifle where a locked, level position is wanted\u003c\/li\u003e\n\u003cli\u003eNight fox and vermin control over stubble and rough pasture\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Atlas CAL Tall (Cant And Loc) — lockable cant with extended legs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e Two-screw clamp for MIL-STD-1913 Picatinny rail, supplied fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount upgrade:\u003c\/b\u003e Convertible with the \u003ca href=\"\/products\/atlas-bipod-bt6569ml-cal-upgrade-mount\"\u003eBT6569ML CAL upgrade mount\u003c\/a\u003e, available in two-screw or No Clamp form\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e Atlas quick-change system — \u003ca href=\"\/products\/atlas-bipod-bt32-standard-rubber-feet\"\u003eBT32 standard rubber feet\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 quick-change ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider stainless steel cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLeg extensions:\u003c\/b\u003e Accepts the \u003ca href=\"\/products\/atlas-bipod-bt22-3-inch-leg-extensions\"\u003eBT22 3 inch (76 mm) leg extensions\u003c\/a\u003e for more height still\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarry:\u003c\/b\u003e Fits the \u003ca href=\"\/products\/atlas-bipod-bt30-tall-bipod-pouch-coyote-brown\"\u003eBT30 tall Atlas bipod pouch in Coyote Brown\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSeries\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas CAL Tall (Cant And Loc, extended legs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-screw MIL-STD-1913 Picatinny rail clamp, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount Pattern\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.100 in (27.9 mm) two-hole pattern, 10\/32 threads — 17S-size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCant\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePositive, lockable cant control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatible Feet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas quick-change: BT32 rubber, BT23 ski, BT74 Raider cleat (V8 \/ PSR \/ CAL pattern)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLeg Extensions\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT22 fixed 3 inch (76 mm); BT85 adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePouch\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30 tall Atlas bipod pouch (standard and tall height)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT69 \/ BT69 \/ 810040220203\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT69 CAL Tall bipod with the two-screw Picatinny mount fitted\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bipod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich mount does the Atlas BT69 CAL Tall need?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT69 needs no separate mount, because the two-screw MIL-STD-1913 Picatinny clamp is supplied already fitted; the rifle simply needs a Picatinny rail section for it to bolt onto.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the difference between the Atlas BT69 and the BT65?\u003c\/b\u003e\u003cbr\u003eThey are the same CAL bipod build with the same mounting pattern, and the difference is leg length: the BT69 is the Tall version with longer legs for extra ground clearance, and the BT65 is the standard height.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does CAL stand for on an Atlas bipod?\u003c\/b\u003e\u003cbr\u003eCAL stands for Cant And Loc, B\u0026amp;T's name for positive, lockable cant control that keeps the rifle level on uneven ground.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich pouch fits the Atlas BT69 CAL Tall?\u003c\/b\u003e\u003cbr\u003eThe BT30 tall Atlas bipod pouch is the one to choose, because it is cut to take both standard and tall height V8, PSR and CAL bipods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich feet fit the Atlas BT69 CAL Tall bipod?\u003c\/b\u003e\u003cbr\u003eIt takes the V8, PSR and CAL pattern Atlas quick-change feet — BT32 standard rubber feet, BT23 quick-change ski feet and BT74 Raider stainless steel cleat feet — each sold as a pair and listed in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT69 CAL Tall bipod with the two-screw Picatinny mount already fitted.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307902833014,"sku":"BT69","price":289.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt69-cal-tall-with-two-screw-picatinny-mount-1.jpg?v=1785271706"},{"product_id":"atlas-bipod-bt65-nc-cal-no-clamp","title":"Atlas Bipod BT65-NC CAL No Clamp","description":"\u003cp\u003eThe \u003cb\u003eAtlas Bipod BT65-NC CAL No Clamp\u003c\/b\u003e, part number BT65-NC from B\u0026amp;T Industries, is the standard-height CAL (Cant And Loc) Atlas bipod supplied with no clamp fitted. Its 1.100 inch (27.9 mm) two-hole pattern with 10\/32 threads accepts the BT19 Accuracy International spigot, the BT70 M-LOK adaptor or any 17S-size lever mount such as the ADM-170-S.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\"NC\" means No Clamp, and it is the only difference here: the \u003ca href=\"\/products\/atlas-bipod-bt65-cal-with-two-screw-picatinny-mount\"\u003eBT65 CAL with the two-screw Picatinny clamp\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt65-lw17-cal-with-adm-170-s-lever-qd-mount\"\u003eBT65-LW17 CAL with the ADM-170-S lever\u003c\/a\u003e both arrive with a mount fitted. For longer legs on the same pattern, see the \u003ca href=\"\/products\/atlas-bipod-bt69-nc-cal-tall-no-clamp\"\u003eAtlas BT69-NC CAL Tall bipod\u003c\/a\u003e. The mount itself can be changed later with the \u003ca href=\"\/products\/atlas-bipod-bt6569ml-cal-upgrade-mount\"\u003eBT6569ML CAL upgrade mount\u003c\/a\u003e. The whole family is in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAccuracy International rifles running the factory spigot forend\u003c\/li\u003e\n\u003cli\u003eM-LOK handguards, bolting straight into a rail slot with the BT70 adaptor\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooters fitting an ARCA or lever clamp of their own\u003c\/li\u003e\n\u003cli\u003eHill stalking and steep ground, where locked cant is worth more than free panning\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Atlas CAL (Cant And Loc) — positive, lockable cant control\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e None fitted — 1.100 in (27.9 mm) two-hole pattern, 10\/32 threads, 17S-size\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpigot option:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt19-accuracy-international-spigot-aais\"\u003eBT19 Accuracy International spigot (AAIS)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eM-LOK option:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt70-m-lok-adaptor\"\u003eBT70 M-LOK adaptor\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLever option:\u003c\/b\u003e \u003ca href=\"\/products\/american-defense-adm-170-s-picatinny-lever-mount-atlas-bipod\"\u003eAmerican Defense ADM-170-S Picatinny lever mount\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e Atlas quick-change system — \u003ca href=\"\/products\/atlas-bipod-bt32-standard-rubber-feet\"\u003eBT32 standard rubber feet\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 quick-change ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider stainless steel cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSeries\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas CAL (Cant And Loc), standard height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNone fitted — accepts BT19 spigot, BT70 M-LOK adaptor or any 17S-size clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount Pattern\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.100 in (27.9 mm) two-hole pattern, 10\/32 threads — 17S-size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCant\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePositive, lockable cant control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatible Feet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas quick-change: BT32 rubber, BT23 ski, BT74 Raider cleat (V8 \/ PSR \/ CAL pattern)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLeg Extensions\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT22 fixed 3 inch (76 mm); BT85 adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePouch\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-B, BT30-C or BT30-R standard-height Atlas bipod pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT65-NC \/ BT65-NC \/ 810040220180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1× Atlas BT65-NC CAL bipod, no clamp fitted\u003c\/li\u003e\n\u003cli\u003eMount installation screws (10-32 flat socket)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bipod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich mount does the Atlas BT65-NC need?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT65-NC is supplied with no clamp, so it needs a mount bought separately: the BT19 Accuracy International spigot, the BT70 M-LOK adaptor, or any 17S-size lever clamp such as the American Defense ADM-170-S.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Atlas BT65-NC clamp directly to a Picatinny rail?\u003c\/b\u003e\u003cbr\u003eNo — the BT65-NC has no clamp of its own and cannot attach to a Picatinny rail until a 17S-size mount is bolted to it; if you want it ready to use, choose the \u003ca href=\"\/products\/atlas-bipod-bt65-cal-with-two-screw-picatinny-mount\"\u003eBT65 with the two-screw clamp\u003c\/a\u003e or the \u003ca href=\"\/products\/atlas-bipod-bt65-lw17-cal-with-adm-170-s-lever-qd-mount\"\u003eBT65-LW17 with the ADM-170-S lever\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the mounting hole pattern on the Atlas BT65-NC?\u003c\/b\u003e\u003cbr\u003eThe BT65-NC uses a 1.100 inch (27.9 mm) two-hole pattern with 10\/32 threads, which is the 17S size, so any 17S-size mount will bolt straight to it.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does CAL stand for on an Atlas bipod?\u003c\/b\u003e\u003cbr\u003eCAL stands for Cant And Loc, B\u0026amp;T's name for positive, lockable cant control that keeps the rifle level on uneven ground.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eCan the Atlas BT65-NC be made ARCA compatible?\u003c\/b\u003e\u003cbr\u003eNo Atlas bipod in this range is natively ARCA-Swiss, but the BT65-NC is the simplest to convert because it is supplied clamp-free — fit an ARCA clamp such as the \u003ca href=\"\/products\/area-419-arcalock-clamp-atlas-bipod\"\u003eArea 419 ARCALOCK clamp for Atlas bipods\u003c\/a\u003e from our \u003ca href=\"\/collections\/arca-bipods\"\u003eARCA bipods and clamps\u003c\/a\u003e collection.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT65-NC CAL bipod with no clamp fitted, plus the 10-32 flat socket mount installation screws.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307902898550,"sku":"BT65-NC","price":264.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt65-nc-cal-no-clamp-1.jpg?v=1785269510"},{"product_id":"atlas-bipod-bt65-lw17-cal-with-adm-170-s-lever-qd-mount","title":"Atlas Bipod BT65-LW17 CAL with ADM-170-S Lever QD Mount","description":"\u003cp\u003eThe \u003cb\u003eAtlas Bipod BT65-LW17 CAL\u003c\/b\u003e, part number BT65-LW17 from B\u0026amp;T Industries, is the standard-height CAL (Cant And Loc) Atlas bipod supplied with the American Defense ADM-170-S quick-detach lever mount fitted. It clamps to any MIL-STD-1913 Picatinny rail in seconds and locks its cant positively, so the rifle stays where you level it.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis is the quick-detach member of the BT65 family. The \u003ca href=\"\/products\/atlas-bipod-bt65-cal-with-two-screw-picatinny-mount\"\u003eBT65 CAL with the two-screw Picatinny clamp\u003c\/a\u003e is the fixed, bolted-down option, and the \u003ca href=\"\/products\/atlas-bipod-bt65-nc-cal-no-clamp\"\u003eBT65-NC CAL supplied with no clamp\u003c\/a\u003e is for a 17S-size mount of your own choosing. For longer legs, the \u003ca href=\"\/products\/atlas-bipod-bt69-lw17-cal-tall-with-adm-170-s-lever-qd-mount\"\u003eAtlas BT69-LW17 CAL Tall bipod\u003c\/a\u003e pairs the tall CAL with the same lever. The lever is also stocked separately as the \u003ca href=\"\/products\/american-defense-adm-170-s-picatinny-lever-mount-atlas-bipod\"\u003eAmerican Defense ADM-170-S Picatinny lever mount\u003c\/a\u003e. Compare the range in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStalkers who share one bipod between a stalking rifle and a range rifle\u003c\/li\u003e\n\u003cli\u003eHill stalking and steep ground, where locking the cant matters\u003c\/li\u003e\n\u003cli\u003ePractical and service rifle, and PRS-style stages\u003c\/li\u003e\n\u003cli\u003eF-Class, benchrest and target rifle where the bipod is removed for transport\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Atlas CAL (Cant And Loc) — positive, lockable cant control\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e American Defense ADM-170-S quick-detach lever for MIL-STD-1913 Picatinny rail, supplied fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLever tension:\u003c\/b\u003e Adjustable clamping nut, so lever tension can be tuned to your own rail\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e Atlas quick-change system — \u003ca href=\"\/products\/atlas-bipod-bt32-standard-rubber-feet\"\u003eBT32 standard rubber feet\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 quick-change ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider stainless steel cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLeg extensions:\u003c\/b\u003e Accepts the \u003ca href=\"\/products\/atlas-bipod-bt22-3-inch-leg-extensions\"\u003eBT22 3 inch (76 mm) leg extensions\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt85-adjustable-leg-extensions\"\u003eBT85 adjustable leg extensions\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarry:\u003c\/b\u003e Fits the standard-height Atlas pouches, including the \u003ca href=\"\/products\/atlas-bipod-bt30-r-bipod-pouch-ranger-green\"\u003eBT30-R Atlas bipod pouch in Ranger Green\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSeries\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas CAL (Cant And Loc), standard height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAmerican Defense ADM-170-S lever quick-detach, MIL-STD-1913 Picatinny, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount Pattern\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.100 in (27.9 mm) two-hole pattern, 10\/32 threads — 17S-size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCant\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePositive, lockable cant control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatible Feet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas quick-change: BT32 rubber, BT23 ski, BT74 Raider cleat (V8 \/ PSR \/ CAL pattern)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLeg Extensions\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT22 fixed 3 inch (76 mm); BT85 adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePouch\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-B, BT30-C or BT30-R standard-height Atlas bipod pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT65-LW17 \/ BT65-LW17 \/ 810040220197\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1× Atlas BT65 CAL bipod\u003c\/li\u003e\n\u003cli\u003e1× American Defense ADM-170-S lever quick-detach mount, fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bipod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does CAL stand for on an Atlas bipod?\u003c\/b\u003e\u003cbr\u003eCAL stands for Cant And Loc, B\u0026amp;T's name for positive, lockable cant control that keeps the rifle level on uneven ground.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich mount does the Atlas BT65-LW17 need?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT65-LW17 needs no separate mount, because the American Defense ADM-170-S quick-detach lever is supplied already fitted; the rifle only needs a MIL-STD-1913 Picatinny rail section for the lever to clamp onto.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the Atlas BT65-LW17 return to the same position after removal?\u003c\/b\u003e\u003cbr\u003eThe ADM-170-S lever mount is designed for repeatable refitting to the same rail slot, so putting it back in the slot it came from is what keeps the fit consistent, and the clamping nut can be adjusted to suit your rail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the mounting hole pattern on the CAL series?\u003c\/b\u003e\u003cbr\u003eThe CAL series uses a 1.100 inch (27.9 mm) two-hole pattern with 10\/32 threads, which is the 17S size, so any 17S-size mount will bolt to it.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich feet fit the Atlas BT65-LW17 CAL bipod?\u003c\/b\u003e\u003cbr\u003eIt takes the V8, PSR and CAL pattern Atlas quick-change feet — BT32 standard rubber feet, BT23 quick-change ski feet and BT74 Raider stainless steel cleat feet — each sold as a pair and listed in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT65 CAL bipod with the American Defense ADM-170-S lever quick-detach mount already fitted.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307902964086,"sku":"BT65-LW17","price":350.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt65-lw17-cal-with-adm-170-s-lever-qd-mount-1.jpg?v=1785208863"},{"product_id":"atlas-bipod-bt65-cal-with-two-screw-picatinny-mount","title":"Atlas Bipod BT65 CAL with Two-Screw Picatinny Mount","description":"\u003cp\u003eThe \u003cb\u003eAtlas Bipod BT65 CAL\u003c\/b\u003e, part number BT65 from B\u0026amp;T Industries, is the standard-height CAL (Cant And Loc) Atlas bipod supplied with the two-screw MIL-STD-1913 Picatinny clamp already fitted. CAL means the cant can be locked off positively, so the rifle stays where you level it on a slope or a barricade.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eMount type is the only difference across the BT65 family: this one is bolted down with the two-screw clamp, the \u003ca href=\"\/products\/atlas-bipod-bt65-lw17-cal-with-adm-170-s-lever-qd-mount\"\u003eBT65-LW17 CAL with the ADM-170-S quick-detach lever\u003c\/a\u003e comes on and off in seconds, and the \u003ca href=\"\/products\/atlas-bipod-bt65-nc-cal-no-clamp\"\u003eBT65-NC CAL supplied with no clamp\u003c\/a\u003e takes a 17S-size mount of your own. For more leg length, the \u003ca href=\"\/products\/atlas-bipod-bt69-cal-tall-with-two-screw-picatinny-mount\"\u003eAtlas BT69 CAL Tall bipod\u003c\/a\u003e is the same bipod with longer legs. If you would rather have free panning, look at the \u003ca href=\"\/products\/atlas-bipod-bt10-v8-with-two-screw-picatinny-mount\"\u003eAtlas BT10 V8 bipod\u003c\/a\u003e. All of them are in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHill stalking and steep ground, where levelling the rifle matters more than panning\u003c\/li\u003e\n\u003cli\u003eF-Class, benchrest and target rifle, where a locked position is wanted between shots\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting off barricades and improvised rests\u003c\/li\u003e\n\u003cli\u003eDeer stalking from a high seat or a fixed rest\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Atlas CAL (Cant And Loc) — positive, lockable cant control\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e Two-screw clamp for MIL-STD-1913 Picatinny rail, supplied fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount upgrade:\u003c\/b\u003e Convertible with the \u003ca href=\"\/products\/atlas-bipod-bt6569ml-cal-upgrade-mount\"\u003eBT6569ML CAL upgrade mount\u003c\/a\u003e, available in two-screw or No Clamp form\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e Atlas quick-change system — \u003ca href=\"\/products\/atlas-bipod-bt32-standard-rubber-feet\"\u003eBT32 standard rubber feet\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 quick-change ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider stainless steel cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLeg extensions:\u003c\/b\u003e Accepts the \u003ca href=\"\/products\/atlas-bipod-bt22-3-inch-leg-extensions\"\u003eBT22 3 inch (76 mm) leg extensions\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt85-adjustable-leg-extensions\"\u003eBT85 adjustable leg extensions\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRear support:\u003c\/b\u003e Pairs with \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot rear monopods\u003c\/a\u003e such as the \u003ca href=\"\/products\/accu-shot-bt12-qk-monopod-prm-mount\"\u003eBT12-QK Precision Rail Monopod\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSeries\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas CAL (Cant And Loc), standard height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-screw MIL-STD-1913 Picatinny rail clamp, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount Pattern\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.100 in (27.9 mm) two-hole pattern, 10\/32 threads — 17S-size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCant\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePositive, lockable cant control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatible Feet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas quick-change: BT32 rubber, BT23 ski, BT74 Raider cleat (V8 \/ PSR \/ CAL pattern)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLeg Extensions\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT22 fixed 3 inch (76 mm); BT85 adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePouch\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-B, BT30-C or BT30-R standard-height Atlas bipod pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT65 \/ BT65 \/ 810040220173\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT65 CAL bipod with the two-screw Picatinny mount fitted\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bipod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does CAL stand for on an Atlas bipod?\u003c\/b\u003e\u003cbr\u003eCAL stands for Cant And Loc, B\u0026amp;T's name for positive, lockable cant control that keeps the rifle level on uneven ground.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich mount does the Atlas BT65 CAL need?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT65 needs no separate mount, because the two-screw MIL-STD-1913 Picatinny clamp is supplied already fitted; the rifle simply needs a Picatinny rail section for it to bolt onto.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Atlas BT65 clamp directly to a Picatinny rail, or does it need an adapter?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT65 clamps directly to any MIL-STD-1913 Picatinny rail section; on an M-LOK handguard add the \u003ca href=\"\/products\/atlas-bipod-bt73-m-lok-picatinny-rail\"\u003eBT73 M-LOK Picatinny rail\u003c\/a\u003e, and on a stock with only a sling stud use the \u003ca href=\"\/products\/atlas-bipod-bt81-lil-brandi-sling-stud-adapter\"\u003eBT81 Lil' Brandi sling stud to rail adapter\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the mounting hole pattern on the CAL series?\u003c\/b\u003e\u003cbr\u003eThe CAL series uses a 1.100 inch (27.9 mm) two-hole pattern with 10\/32 threads, which is the 17S size, so any 17S-size mount will bolt to it.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich feet fit the Atlas BT65 CAL bipod?\u003c\/b\u003e\u003cbr\u003eIt takes the V8, PSR and CAL pattern Atlas quick-change feet — BT32 standard rubber feet, BT23 quick-change ski feet and BT74 Raider stainless steel cleat feet — each sold as a pair and listed in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT65 CAL bipod with the two-screw Picatinny mount already fitted.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307902996854,"sku":"BT65","price":270.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt65-cal-with-two-screw-picatinny-mount-1.jpg?v=1785209136"},{"product_id":"atlas-bipod-bt47-nc-psr-tall-no-clamp","title":"Atlas Bipod BT47-NC PSR Tall No Clamp","description":"\u003cp\u003eThe \u003cb\u003eAtlas Bipod BT47-NC PSR Tall No Clamp\u003c\/b\u003e, part number BT47-NC from B\u0026amp;T Industries, is the tall-leg PSR (Precision Sniper Rifle) Atlas bipod supplied with no clamp fitted. The longer legs give extra ground clearance over cover and vegetation, and the two-hole 17S-size pattern accepts the BT19 Accuracy International spigot, the BT70 M-LOK adaptor or any 17S-size lever mount such as the ADM-170-S.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\"NC\" means No Clamp, so this is the model to choose when you already know which mount you want. The \u003ca href=\"\/products\/atlas-bipod-bt47-lw17-psr-tall-with-adm-170-s-lever-qd-mount\"\u003eBT47-LW17 PSR Tall with the ADM-170-S lever\u003c\/a\u003e arrives ready to clamp on, and the \u003ca href=\"\/products\/atlas-bipod-bt46-nc-psr-no-clamp\"\u003eBT46-NC PSR at standard height\u003c\/a\u003e is the shorter-legged twin of this listing. The tall CAL alternative is the \u003ca href=\"\/products\/atlas-bipod-bt69-nc-cal-tall-no-clamp\"\u003eAtlas BT69-NC CAL Tall bipod\u003c\/a\u003e. See them side by side in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHill and woodland stalking over heather, bracken and long grass\u003c\/li\u003e\n\u003cli\u003eAccuracy International rifles running the factory spigot forend\u003c\/li\u003e\n\u003cli\u003eM-LOK handguards, via the BT70 adaptor straight into a rail slot\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting from barricades and awkward positions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Atlas PSR Tall — the heavier-duty Atlas line with extended legs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e None fitted — two-hole 17S-size Atlas pattern, ready for the mount you choose\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpigot option:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt19-accuracy-international-spigot-aais\"\u003eBT19 Accuracy International spigot (AAIS)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eM-LOK option:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt70-m-lok-adaptor\"\u003eBT70 M-LOK adaptor\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLever option:\u003c\/b\u003e \u003ca href=\"\/products\/american-defense-adm-170-s-picatinny-lever-mount-atlas-bipod\"\u003eAmerican Defense ADM-170-S Picatinny lever mount\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e Atlas quick-change system — \u003ca href=\"\/products\/atlas-bipod-bt32-standard-rubber-feet\"\u003eBT32 standard rubber feet\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 quick-change ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider stainless steel cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSeries\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas PSR Tall (Precision Sniper Rifle, extended legs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNone fitted — accepts BT19 spigot, BT70 M-LOK adaptor or any 17S-size clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount Pattern\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-hole 17S-size Atlas pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdjustment\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eIndependent pan and cant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatible Feet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas quick-change: BT32 rubber, BT23 ski, BT74 Raider cleat (V8 \/ PSR \/ CAL pattern)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLeg Extensions\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT22 fixed 3 inch (76 mm); BT85 adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePouch\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30 tall Atlas bipod pouch (standard and tall height)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT47-NC \/ BT47-NC \/ 810040220159\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1× Atlas BT47-NC PSR Tall bipod, no clamp fitted\u003c\/li\u003e\n\u003cli\u003eMount installation screws (10-32 flat socket)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bipod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich mount does the Atlas BT47-NC need?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT47-NC is supplied with no clamp, so it needs a mount bought separately: the BT19 Accuracy International spigot, the BT70 M-LOK adaptor, or any 17S-size lever clamp such as the American Defense ADM-170-S.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Atlas BT47-NC clamp directly to a Picatinny rail?\u003c\/b\u003e\u003cbr\u003eNo — the BT47-NC has no clamp of its own and cannot attach to a Picatinny rail until a 17S-size mount is fitted to it; if you want it ready to use, choose the \u003ca href=\"\/products\/atlas-bipod-bt47-lw17-psr-tall-with-adm-170-s-lever-qd-mount\"\u003eBT47-LW17 with the ADM-170-S lever fitted\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the difference between the Atlas BT47-NC and the BT46-NC?\u003c\/b\u003e\u003cbr\u003eThey share the same PSR build and the same no-clamp mounting pattern, and the difference is leg length: the BT47-NC is the Tall version with longer legs for extra ground clearance, and the BT46-NC is the standard height.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich feet fit the Atlas BT47-NC PSR Tall bipod?\u003c\/b\u003e\u003cbr\u003eIt takes the V8, PSR and CAL pattern Atlas quick-change feet — BT32 standard rubber feet, BT23 quick-change ski feet and BT74 Raider stainless steel cleat feet — each sold as a pair and listed in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich pouch fits the Atlas BT47-NC PSR Tall?\u003c\/b\u003e\u003cbr\u003eThe BT30 tall Atlas bipod pouch is the right choice, because it is cut to take both standard and tall height V8, PSR and CAL bipods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT47-NC PSR Tall bipod with no clamp fitted, plus the 10-32 flat socket mount installation screws.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307903062390,"sku":"BT47-NC","price":309.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt47-nc-psr-tall-no-clamp-1.jpg?v=1785271775"},{"product_id":"atlas-bipod-bt47-lw17-psr-tall-with-adm-170-s-lever-qd-mount","title":"Atlas Bipod BT47-LW17 PSR Tall with ADM-170-S Lever QD Mount","description":"\u003cp\u003eThe \u003cb\u003eAtlas Bipod BT47-LW17 PSR Tall\u003c\/b\u003e, part number BT47-LW17 from B\u0026amp;T Industries, is the tall-leg PSR (Precision Sniper Rifle) Atlas bipod supplied with the American Defense ADM-170-S quick-detach lever mount fitted. The longer legs give extra ground clearance for shooting over cover, kit or long grass, and the lever clamps to any MIL-STD-1913 Picatinny rail in seconds.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT47 is the Tall PSR; the \u003ca href=\"\/products\/atlas-bipod-bt46-lw17-psr-with-adm-170-s-lever-qd-mount\"\u003eBT46-LW17 PSR at standard height\u003c\/a\u003e is the same bipod with shorter legs and suits most prone work. If you want to fit your own mount, the \u003ca href=\"\/products\/atlas-bipod-bt47-nc-psr-tall-no-clamp\"\u003eBT47-NC PSR Tall supplied with no clamp\u003c\/a\u003e is this bipod without a clamp. The tall CAL alternative, which locks cant rather than panning freely, is the \u003ca href=\"\/products\/atlas-bipod-bt69-lw17-cal-tall-with-adm-170-s-lever-qd-mount\"\u003eAtlas BT69-LW17 CAL Tall bipod\u003c\/a\u003e. Browse the family in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHill and woodland stalking, where heather, bracken and long grass sit above a standard bipod\u003c\/li\u003e\n\u003cli\u003eShooting from barricades, over cover and on steep ground\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style stages with awkward positions\u003c\/li\u003e\n\u003cli\u003eNight fox and vermin control over stubble and rough pasture\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Atlas PSR Tall — the heavier-duty Atlas line with extended legs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e American Defense ADM-170-S quick-detach lever for MIL-STD-1913 Picatinny rail, supplied fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e Independent pan and cant, for tracking and for levelling on uneven ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e Atlas quick-change system — \u003ca href=\"\/products\/atlas-bipod-bt32-standard-rubber-feet\"\u003eBT32 standard rubber feet\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 quick-change ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider stainless steel cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLeg extensions:\u003c\/b\u003e Accepts the \u003ca href=\"\/products\/atlas-bipod-bt22-3-inch-leg-extensions\"\u003eBT22 3 inch (76 mm) leg extensions\u003c\/a\u003e for more height still\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarry:\u003c\/b\u003e Fits the \u003ca href=\"\/products\/atlas-bipod-bt30-tall-bipod-pouch-coyote-brown\"\u003eBT30 tall Atlas bipod pouch in Coyote Brown\u003c\/a\u003e, which covers standard and tall models\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSeries\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas PSR Tall (Precision Sniper Rifle, extended legs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAmerican Defense ADM-170-S lever quick-detach, MIL-STD-1913 Picatinny, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount Pattern\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-hole 17S-size Atlas pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdjustment\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eIndependent pan and cant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatible Feet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas quick-change: BT32 rubber, BT23 ski, BT74 Raider cleat (V8 \/ PSR \/ CAL pattern)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLeg Extensions\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT22 fixed 3 inch (76 mm); BT85 adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePouch\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30 tall Atlas bipod pouch (standard and tall height)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT47-LW17 \/ BT47-LW17 \/ 810040220166\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1× Atlas BT47 PSR Tall bipod\u003c\/li\u003e\n\u003cli\u003e1× American Defense ADM-170-S lever quick-detach mount, fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bipod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich mount does the Atlas BT47-LW17 need?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT47-LW17 needs no separate mount, because the American Defense ADM-170-S quick-detach lever is supplied already fitted; the rifle only needs a MIL-STD-1913 Picatinny rail section for the lever to clamp onto.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow much taller is the BT47 than the BT46?\u003c\/b\u003e\u003cbr\u003eThe BT47 is the Tall version of the same PSR bipod, built with longer legs for extra ground clearance, while the BT46 is the standard height; B\u0026amp;T do not publish a single fixed difference figure for the two, so choose the Tall model if you regularly shoot over cover or long vegetation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eCan the Atlas BT47-LW17 be made taller still?\u003c\/b\u003e\u003cbr\u003eYes — the BT22 leg extensions add a further 3 inches (76 mm) to each leg, and the BT85 adjustable leg extensions let the added height be set rather than fixed.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich pouch fits the Atlas BT47-LW17 PSR Tall?\u003c\/b\u003e\u003cbr\u003eThe BT30 tall Atlas bipod pouch is the one to choose, because it is cut to take both standard and tall height V8, PSR and CAL bipods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the Atlas BT47-LW17 ARCA compatible?\u003c\/b\u003e\u003cbr\u003eNo — the BT47-LW17 uses a Picatinny lever mount and no Atlas bipod in this range is natively ARCA-Swiss; ARCA compatibility comes from a separate clamp such as the \u003ca href=\"\/products\/really-right-stuff-btc-pro-dual-arca-pic-clamp\"\u003eReally Right Stuff BTC-Pro dual ARCA and Picatinny clamp\u003c\/a\u003e in our \u003ca href=\"\/collections\/arca-bipods\"\u003eARCA bipods and clamps\u003c\/a\u003e collection.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT47 PSR Tall bipod with the American Defense ADM-170-S lever quick-detach mount already fitted.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307903095158,"sku":"BT47-LW17","price":400.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt47-lw17-psr-tall-with-adm-170-s-lever-qd-mount-1.jpg?v=1785277283"},{"product_id":"atlas-bipod-bt46-nc-psr-no-clamp","title":"Atlas Bipod BT46-NC PSR No Clamp","description":"\u003cp\u003eThe \u003cb\u003eAtlas Bipod BT46-NC PSR No Clamp\u003c\/b\u003e, part number BT46-NC from B\u0026amp;T Industries, is the standard-height PSR (Precision Sniper Rifle) Atlas bipod supplied with no clamp fitted. Its two-hole 17S-size pattern accepts the BT19 Accuracy International spigot, the BT70 M-LOK adaptor or any 17S-size lever mount such as the ADM-170-S, and it keeps the PSR's independent pan and cant and quick-change feet.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\"NC\" means No Clamp. The \u003ca href=\"\/products\/atlas-bipod-bt46-lw17-psr-with-adm-170-s-lever-qd-mount\"\u003eBT46-LW17 PSR with the ADM-170-S lever\u003c\/a\u003e is the same bipod with a Picatinny mount already on it, and the \u003ca href=\"\/products\/atlas-bipod-bt47-nc-psr-tall-no-clamp\"\u003eBT47-NC PSR Tall supplied with no clamp\u003c\/a\u003e is the taller-legged version of this listing. If you want the lighter build, the \u003ca href=\"\/products\/atlas-bipod-bt10-nc-v8-no-clamp\"\u003eAtlas BT10-NC V8 bipod\u003c\/a\u003e uses the same no-clamp approach. Compare the range in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e and the wider \u003ca href=\"\/collections\/rifle-bipods\"\u003eUK rifle bipod selection\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAccuracy International rifles running the factory spigot forend\u003c\/li\u003e\n\u003cli\u003eM-LOK handguards, mounting straight into a rail slot with the BT70 adaptor\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooters building around an ARCA or lever clamp of their own\u003c\/li\u003e\n\u003cli\u003eDeer stalking and target rifles with an unusual forend that needs a specific mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Atlas PSR (Precision Sniper Rifle) — the heavier-duty Atlas line developed from the V8\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e None fitted — two-hole 17S-size Atlas pattern, ready for the mount you choose\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpigot option:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt19-accuracy-international-spigot-aais\"\u003eBT19 Accuracy International spigot (AAIS)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eM-LOK option:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt70-m-lok-adaptor\"\u003eBT70 M-LOK adaptor\u003c\/a\u003e, bolting straight into an M-LOK slot\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLever option:\u003c\/b\u003e \u003ca href=\"\/products\/american-defense-adm-170-s-picatinny-lever-mount-atlas-bipod\"\u003eAmerican Defense ADM-170-S Picatinny lever mount\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e Atlas quick-change system — \u003ca href=\"\/products\/atlas-bipod-bt32-standard-rubber-feet\"\u003eBT32 standard rubber feet\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 quick-change ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider stainless steel cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSeries\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas PSR (Precision Sniper Rifle), standard height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNone fitted — accepts BT19 spigot, BT70 M-LOK adaptor or any 17S-size clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount Pattern\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-hole 17S-size Atlas pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdjustment\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eIndependent pan and cant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatible Feet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas quick-change: BT32 rubber, BT23 ski, BT74 Raider cleat (V8 \/ PSR \/ CAL pattern)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLeg Extensions\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT22 fixed 3 inch (76 mm); BT85 adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePouch\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-B, BT30-C or BT30-R standard-height Atlas bipod pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT46-NC \/ BT46-NC \/ 810040220135\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1× Atlas BT46-NC PSR bipod, no clamp fitted\u003c\/li\u003e\n\u003cli\u003eMount installation screws (10-32 flat socket)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bipod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich mount does the Atlas BT46-NC need?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT46-NC is supplied with no clamp, so it needs a mount bought separately: the BT19 Accuracy International spigot, the BT70 M-LOK adaptor, or any 17S-size lever clamp such as the American Defense ADM-170-S.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Atlas BT46-NC clamp directly to a Picatinny rail?\u003c\/b\u003e\u003cbr\u003eNo — on its own the BT46-NC has no clamp and cannot attach to a Picatinny rail; fit a 17S-size Picatinny mount to it, or choose the \u003ca href=\"\/products\/atlas-bipod-bt46-lw17-psr-with-adm-170-s-lever-qd-mount\"\u003eBT46-LW17 with the ADM-170-S lever already fitted\u003c\/a\u003e instead.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does PSR mean on an Atlas bipod?\u003c\/b\u003e\u003cbr\u003ePSR stands for Precision Sniper Rifle, and the PSR series is the heavier-duty Atlas line developed from the V8 platform.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the difference between the Atlas BT46-NC and the BT47-NC?\u003c\/b\u003e\u003cbr\u003eThey are the same PSR bipod build with the same no-clamp mounting pattern, and the difference is leg length: the BT47-NC is the Tall version with longer legs, and the BT46-NC is the standard height.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich feet fit the Atlas BT46-NC PSR bipod?\u003c\/b\u003e\u003cbr\u003eIt takes the V8, PSR and CAL pattern Atlas quick-change feet — BT32 standard rubber feet, BT23 quick-change ski feet and BT74 Raider stainless steel cleat feet — each sold as a pair and listed in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT46-NC PSR bipod with no clamp fitted, plus the 10-32 flat socket mount installation screws.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307903127926,"sku":"BT46-NC","price":295.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt46-nc-psr-no-clamp-1.jpg?v=1785369225"},{"product_id":"atlas-bipod-bt35-nc-5-h-no-clamp","title":"Atlas Bipod BT35-NC 5-H No Clamp","description":"\u003cp\u003eThe \u003cb\u003eAtlas Bipod BT35-NC 5-H No Clamp\u003c\/b\u003e, part number BT35-NC from B\u0026amp;T Industries, is the flagship 5-H Atlas bipod supplied with no clamp fitted. It is the largest and heaviest bipod in the Atlas range, and it mounts to the BT19 Accuracy International spigot, the BT70 M-LOK adaptor, the dedicated ADM 5-H lever, an ARMS 17S or an LT171 mount.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\"NC\" means No Clamp. The \u003ca href=\"\/products\/atlas-bipod-bt35-lw17-5-h-with-adm-4103la74-5-h-lever-qd-mount\"\u003eBT35-LW17 5-H with the ADM 5-H lever fitted\u003c\/a\u003e is the same bipod ready to clamp onto a Picatinny rail. The other heavyweight in the range is the \u003ca href=\"\/products\/atlas-bipod-bt72-nc-super-cal-no-clamp\"\u003eAtlas BT72-NC Super CAL bipod\u003c\/a\u003e, and for a lighter setup the \u003ca href=\"\/products\/atlas-bipod-bt46-nc-psr-no-clamp\"\u003eAtlas BT46-NC PSR bipod\u003c\/a\u003e uses the same no-clamp approach. Compare them in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e and the \u003ca href=\"\/collections\/f-class-benchrest-bipods\"\u003eF-Class and benchrest bipod selection\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy target, F-Class and benchrest rifles\u003c\/li\u003e\n\u003cli\u003eAccuracy International rifles running the factory spigot forend\u003c\/li\u003e\n\u003cli\u003eLarge-calibre and long-range builds that overwhelm a lighter bipod\u003c\/li\u003e\n\u003cli\u003eShooters specifying an ARMS 17S, LT171 or ADM 5-H mount of their own\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Atlas 5-H — the flagship, heaviest-duty Atlas bipod\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e None fitted — accepts BT19, BT70, ADM 5-H, ARMS 17S and LT171 mounts\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLever option:\u003c\/b\u003e \u003ca href=\"\/products\/american-defense-adm-5-h-picatinny-lever-mount-atlas-5-h-bipod\"\u003eAmerican Defense ADM-5-H Picatinny lever mount\u003c\/a\u003e, the 5-H's own dedicated lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpigot option:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt19-accuracy-international-spigot-aais\"\u003eBT19 Accuracy International spigot (AAIS)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eM-LOK option:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt70-m-lok-adaptor\"\u003eBT70 M-LOK adaptor\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e 5-H and Super CAL pattern — \u003ca href=\"\/products\/atlas-bipod-bt55-5-h-super-cal-standard-rubber-feet\"\u003eBT55 standard rubber feet\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt66-5-h-super-cal-bas-ski-feet\"\u003eBT66 BAS ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt75-raider-cleat-feet-for-5-h-super-cal\"\u003eBT75 Raider cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSeries\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas 5-H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNone fitted — accepts BT19 spigot, BT70 M-LOK adaptor, ADM 5-H lever, ARMS 17S or LT171\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDedicated Lever\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eADM 5-H (ADM-4103LA74) — not the ADM-170-S used on V8, PSR and CAL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatible Feet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5-H \/ Super CAL pattern: BT55 rubber, BT66 BAS ski, BT75 Raider cleat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePouch\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-S5 large Atlas bipod pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT35-NC \/ BT35-NC \/ 810040220111\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1× Atlas BT35-NC 5-H bipod, no clamp fitted\u003c\/li\u003e\n\u003cli\u003eMount installation screws (10-32 flat socket)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bipod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich mount does the Atlas BT35-NC 5-H need?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT35-NC is supplied with no clamp, so it needs a mount bought separately: the BT19 Accuracy International spigot, the BT70 M-LOK adaptor, the dedicated ADM 5-H lever, an ARMS 17S or an LT171.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich lever mount does the Atlas 5-H use?\u003c\/b\u003e\u003cbr\u003eThe 5-H uses its own dedicated American Defense ADM 5-H lever, part number ADM-4103LA74, and not the ADM-170-S lever fitted to the V8, PSR and CAL bipods; the two are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Atlas BT35-NC clamp directly to a Picatinny rail?\u003c\/b\u003e\u003cbr\u003eNo — the BT35-NC has no clamp of its own and cannot attach to a Picatinny rail until a mount is fitted; if you want it ready to use, choose the \u003ca href=\"\/products\/atlas-bipod-bt35-lw17-5-h-with-adm-4103la74-5-h-lever-qd-mount\"\u003eBT35-LW17 with the ADM 5-H lever already fitted\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich feet fit the Atlas BT35-NC 5-H?\u003c\/b\u003e\u003cbr\u003eThe 5-H takes the 5-H and Super CAL foot pattern — BT55 standard rubber feet, BT66 BAS ski feet and BT75 Raider cleat feet — and it does not take the smaller V8, PSR and CAL feet such as the BT32, BT23 and BT74.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich pouch fits the Atlas BT35-NC 5-H?\u003c\/b\u003e\u003cbr\u003eThe BT30-S5 large Atlas bipod pouch is the correct one, because it is sized for the 5-H and Super CAL bipods rather than the smaller V8, PSR and CAL models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT35-NC 5-H bipod with no clamp fitted, plus the 10-32 flat socket mount installation screws.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307903258998,"sku":"BT35-NC","price":429.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt35-nc-5-h-no-clamp-1.jpg?v=1785269356"},{"product_id":"atlas-bipod-bt35-lw17-5-h-with-adm-4103la74-5-h-lever-qd-mount","title":"Atlas Bipod BT35-LW17 5-H with ADM-4103LA74 5-H Lever QD Mount","description":"\u003cp\u003eThe \u003cb\u003eAtlas Bipod BT35-LW17 5-H\u003c\/b\u003e, part number BT35-LW17 from B\u0026amp;T Industries, is the flagship 5-H Atlas bipod supplied with the American Defense ADM 5-H quick-detach lever mount (ADM-4103LA74) fitted. The 5-H is the largest and heaviest bipod in the Atlas range, and it uses its own dedicated lever rather than the ADM-170-S found on the V8, PSR and CAL models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe \u003ca href=\"\/products\/atlas-bipod-bt35-nc-5-h-no-clamp\"\u003eBT35-NC 5-H supplied with no clamp\u003c\/a\u003e is the same bipod for shooters fitting their own mount, whether that is the BT19 spigot, the BT70 M-LOK adaptor, an ARMS 17S or an LT171. The other heavyweight is the \u003ca href=\"\/products\/atlas-bipod-bt72-lw17-super-cal-with-adm-170-s-lever-qd-mount\"\u003eAtlas BT72-LW17 Super CAL bipod\u003c\/a\u003e, and for a lighter setup the \u003ca href=\"\/products\/atlas-bipod-bt46-lw17-psr-with-adm-170-s-lever-qd-mount\"\u003eAtlas BT46-LW17 PSR bipod\u003c\/a\u003e is the sensible step down. The lever is stocked separately as the \u003ca href=\"\/products\/american-defense-adm-5-h-picatinny-lever-mount-atlas-5-h-bipod\"\u003eAmerican Defense ADM-5-H Picatinny lever mount\u003c\/a\u003e. Compare the family in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy target, F-Class and benchrest rifles\u003c\/li\u003e\n\u003cli\u003eLarge-calibre and long-range builds that overwhelm a lighter bipod\u003c\/li\u003e\n\u003cli\u003eDedicated precision rifles kept for long-range and PRS-style work\u003c\/li\u003e\n\u003cli\u003eShooters who transport a heavy rifle and want the bipod off for the case\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Atlas 5-H — the flagship, heaviest-duty Atlas bipod\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e American Defense ADM 5-H lever quick-detach (ADM-4103LA74), MIL-STD-1913 Picatinny, supplied fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLever note:\u003c\/b\u003e The 5-H uses its own dedicated lever, not the ADM-170-S used on V8, PSR and CAL bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e 5-H and Super CAL pattern — \u003ca href=\"\/products\/atlas-bipod-bt55-5-h-super-cal-standard-rubber-feet\"\u003eBT55 standard rubber feet\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt66-5-h-super-cal-bas-ski-feet\"\u003eBT66 BAS ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt75-raider-cleat-feet-for-5-h-super-cal\"\u003eBT75 Raider cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarry:\u003c\/b\u003e Fits the \u003ca href=\"\/products\/atlas-bipod-bt30-s5-large-bipod-pouch\"\u003eBT30-S5 large Atlas bipod pouch\u003c\/a\u003e, sized for 5-H and Super CAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRear support:\u003c\/b\u003e Pairs with \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot rear monopods\u003c\/a\u003e such as the \u003ca href=\"\/products\/accu-shot-bt31-qk-monopod-prm-mount\"\u003eBT31-QK extended Precision Rail Monopod\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSeries\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas 5-H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAmerican Defense ADM 5-H lever quick-detach (ADM-4103LA74), MIL-STD-1913 Picatinny, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOther Mount Options\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT19 AI spigot, BT70 M-LOK adaptor, ARMS 17S, LT171\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatible Feet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5-H \/ Super CAL pattern: BT55 rubber, BT66 BAS ski, BT75 Raider cleat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePouch\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-S5 large Atlas bipod pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT35-LW17 \/ BT35-LW17 \/ 810040220128\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1× Atlas BT35 5-H bipod\u003c\/li\u003e\n\u003cli\u003e1× American Defense ADM 5-H lever quick-detach mount, fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bipod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich mount does the Atlas BT35-LW17 5-H need?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT35-LW17 needs no separate mount, because the American Defense ADM 5-H lever (ADM-4103LA74) is supplied already fitted; the rifle only needs a MIL-STD-1913 Picatinny rail section for the lever to clamp onto.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhy does the Atlas 5-H use a different lever from the rest of the range?\u003c\/b\u003e\u003cbr\u003eThe 5-H is a larger platform with its own mounting interface, so it uses the dedicated ADM 5-H lever (ADM-4103LA74) rather than the ADM-170-S lever used on the V8, PSR and CAL bipods, and the two are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich feet fit the Atlas BT35-LW17 5-H?\u003c\/b\u003e\u003cbr\u003eThe 5-H takes the 5-H and Super CAL foot pattern — BT55 standard rubber feet, BT66 BAS ski feet and BT75 Raider cleat feet — and it does not take the smaller V8, PSR and CAL feet such as the BT32, BT23 and BT74.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich pouch fits the Atlas BT35-LW17 5-H?\u003c\/b\u003e\u003cbr\u003eThe BT30-S5 large Atlas bipod pouch is the correct one, because it is sized for the 5-H and Super CAL bipods rather than the smaller V8, PSR and CAL models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT35 5-H bipod with the American Defense ADM 5-H lever quick-detach mount already fitted.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307903324534,"sku":"BT35-LW17","price":504.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt35-lw17-5-h-with-adm-4103la74-5-h-lever-qd-mount-1.jpg?v=1785209319"},{"product_id":"atlas-bipod-bt10-nc-v8-no-clamp","title":"Atlas Bipod BT10-NC V8 No Clamp","description":"\u003cp\u003eThe \u003cb\u003eAtlas Bipod BT10-NC V8 No Clamp\u003c\/b\u003e, part number BT10-NC from B\u0026amp;T Industries, is the standard-height Atlas V8 rifle bipod supplied with no clamp fitted. Its two-hole 17S-size pattern accepts the mount of your choosing — the BT19 Accuracy International spigot, the BT70 M-LOK adaptor or any 17S-size lever mount such as the ADM-170-S — and it keeps the V8's independent pan and cant and quick-change feet.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\"NC\" means No Clamp, and that is the whole difference: the \u003ca href=\"\/products\/atlas-bipod-bt10-v8-with-two-screw-picatinny-mount\"\u003eBT10 V8 with the two-screw Picatinny clamp\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt10-lw17-v8-with-adm-170-s-lever-qd-mount\"\u003eBT10-LW17 V8 with the ADM-170-S lever\u003c\/a\u003e arrive ready to bolt or clamp on, while the BT10-NC is the one to buy if you already know which mount you want. For a heavier build, the \u003ca href=\"\/products\/atlas-bipod-bt46-nc-psr-no-clamp\"\u003eAtlas BT46-NC PSR bipod\u003c\/a\u003e uses the same no-clamp approach. The whole family sits in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAccuracy International rifles running the factory spigot forend\u003c\/li\u003e\n\u003cli\u003eM-LOK handguards, mounting straight to the rail slots via the BT70 adaptor\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooters building around an ARCA or lever clamp of their own choice\u003c\/li\u003e\n\u003cli\u003eDeer stalking rifles where the mount has to suit an unusual forend\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Atlas V8 — the standard-height Atlas bipod platform\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e None fitted — two-hole 17S-size Atlas pattern, ready for the mount you choose\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpigot option:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt19-accuracy-international-spigot-aais\"\u003eBT19 Accuracy International spigot (AAIS)\u003c\/a\u003e for AI forends\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eM-LOK option:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt70-m-lok-adaptor\"\u003eBT70 M-LOK adaptor\u003c\/a\u003e, bolting straight into an M-LOK slot\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLever option:\u003c\/b\u003e \u003ca href=\"\/products\/american-defense-adm-170-s-picatinny-lever-mount-atlas-bipod\"\u003eAmerican Defense ADM-170-S Picatinny lever mount\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e Atlas quick-change system — \u003ca href=\"\/products\/atlas-bipod-bt32-standard-rubber-feet\"\u003eBT32 standard rubber feet\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 quick-change ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider stainless steel cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSeries\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas V8, standard height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNone fitted — accepts BT19 spigot, BT70 M-LOK adaptor or any 17S-size clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount Pattern\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-hole 17S-size Atlas pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdjustment\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eIndependent pan and cant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatible Feet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas quick-change: BT32 rubber, BT23 ski, BT74 Raider cleat (V8 \/ PSR \/ CAL pattern)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLeg Extensions\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT22 fixed 3 inch (76 mm); BT85 adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePouch\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-B, BT30-C or BT30-R standard-height Atlas bipod pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT10-NC \/ BT10-NC \/ 810040220098\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1× Atlas BT10-NC V8 bipod, no clamp fitted\u003c\/li\u003e\n\u003cli\u003eMount installation screws (10-32 flat socket)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bipod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich mount does the Atlas BT10-NC need?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT10-NC is supplied with no clamp, so it needs a mount bought separately: the BT19 Accuracy International spigot, the BT70 M-LOK adaptor, or any 17S-size lever clamp such as the American Defense ADM-170-S.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Atlas BT10-NC clamp directly to a Picatinny rail?\u003c\/b\u003e\u003cbr\u003eNo — on its own the BT10-NC has no clamp and cannot attach to a Picatinny rail; fit a 17S-size Picatinny mount such as the ADM-170-S to it, or choose the \u003ca href=\"\/products\/atlas-bipod-bt10-v8-with-two-screw-picatinny-mount\"\u003eBT10 with the two-screw Picatinny clamp\u003c\/a\u003e instead.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does NC stand for on an Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNC stands for No Clamp, meaning the bipod is supplied without a mount so that the buyer can fit their own; a BT10-NC is a different product from a BT10 and the two are not interchangeable once mounted.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich feet fit the Atlas BT10-NC V8 bipod?\u003c\/b\u003e\u003cbr\u003eIt takes the V8, PSR and CAL pattern Atlas quick-change feet — BT32 standard rubber feet, BT23 quick-change ski feet and BT74 Raider stainless steel cleat feet — each sold as a pair and listed in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eCan the Atlas BT10-NC be made ARCA compatible?\u003c\/b\u003e\u003cbr\u003eNo Atlas bipod in this range is natively ARCA-Swiss, but the BT10-NC is the easiest one to convert because it is supplied clamp-free — fit an ARCA clamp such as the \u003ca href=\"\/products\/area-419-arcalock-clamp-atlas-bipod\"\u003eArea 419 ARCALOCK clamp for Atlas bipods\u003c\/a\u003e from our \u003ca href=\"\/collections\/arca-bipods\"\u003eARCA bipods and clamps\u003c\/a\u003e collection.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT10-NC V8 bipod with no clamp fitted, plus the 10-32 flat socket mount installation screws.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307903357302,"sku":"BT10-NC","price":229.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt10-nc-v8-no-clamp-1.jpg?v=1785369225"},{"product_id":"atlas-bipod-bt10-lw17-v8-with-adm-170-s-lever-qd-mount","title":"Atlas Bipod BT10-LW17 V8 with ADM-170-S Lever QD Mount","description":"\u003cp\u003eThe \u003cb\u003eAtlas Bipod BT10-LW17 V8\u003c\/b\u003e, part number BT10-LW17 from B\u0026amp;T Industries, is the standard-height Atlas V8 rifle bipod supplied with the American Defense ADM-170-S quick-detach lever mount fitted. Throw the lever and it clamps to, or comes off, any MIL-STD-1913 Picatinny rail in seconds, with independent pan and cant and the Atlas quick-change foot system.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eMount type is the only difference across the BT10 family. This one carries the ADM lever for shooters who share one bipod between rifles; the \u003ca href=\"\/products\/atlas-bipod-bt10-v8-with-two-screw-picatinny-mount\"\u003eBT10 V8 with the two-screw Picatinny clamp\u003c\/a\u003e is the fixed, torqued-down option; and the \u003ca href=\"\/products\/atlas-bipod-bt10-nc-v8-no-clamp\"\u003eBT10-NC V8 supplied with no clamp\u003c\/a\u003e lets you choose your own 17S-size mount. The lever itself is also sold on its own as the \u003ca href=\"\/products\/american-defense-adm-170-s-picatinny-lever-mount-atlas-bipod\"\u003eAmerican Defense ADM-170-S Picatinny lever mount\u003c\/a\u003e. Compare the rest of the family in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeer stalkers who move one bipod between a stalking rifle and a range rifle\u003c\/li\u003e\n\u003cli\u003eHill and woodland stalking, where the bipod comes off for the carry and back on for the shot\u003c\/li\u003e\n\u003cli\u003ePractical and service rifle, and PRS-style stages with a strict kit list\u003c\/li\u003e\n\u003cli\u003eNight fox and vermin control where the rifle is cased and uncased repeatedly\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Atlas V8 — the standard-height Atlas bipod platform\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e American Defense ADM-170-S quick-detach lever for MIL-STD-1913 Picatinny rail, supplied fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLever tension:\u003c\/b\u003e Adjustable clamping nut, so lever tension can be tuned to your own rail\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e Independent pan and cant, for tracking and for levelling on uneven ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e Atlas quick-change system — \u003ca href=\"\/products\/atlas-bipod-bt32-standard-rubber-feet\"\u003eBT32 standard rubber feet\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 quick-change ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider stainless steel cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLeg extensions:\u003c\/b\u003e Accepts the \u003ca href=\"\/products\/atlas-bipod-bt22-3-inch-leg-extensions\"\u003eBT22 3 inch (76 mm) leg extensions\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt85-adjustable-leg-extensions\"\u003eBT85 adjustable leg extensions\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSeries\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas V8, standard height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAmerican Defense ADM-170-S lever quick-detach, MIL-STD-1913 Picatinny, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLever Adjustment\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAdjustable clamping nut for rail-specific tension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdjustment\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eIndependent pan and cant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatible Feet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas quick-change: BT32 rubber, BT23 ski, BT74 Raider cleat (V8 \/ PSR \/ CAL pattern)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLeg Extensions\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT22 fixed 3 inch (76 mm); BT85 adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePouch\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-B, BT30-C or BT30-R standard-height Atlas bipod pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT10-LW17 \/ BT10-LW17 \/ 810040220104\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1× Atlas BT10 V8 bipod\u003c\/li\u003e\n\u003cli\u003e1× American Defense ADM-170-S lever quick-detach mount, fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bipod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich mount does the Atlas BT10-LW17 need?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT10-LW17 needs no separate mount, because the American Defense ADM-170-S quick-detach lever is supplied already fitted; the rifle only needs a MIL-STD-1913 Picatinny rail section for the lever to clamp onto.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the Atlas BT10-LW17 hold zero if I take it off and put it back on?\u003c\/b\u003e\u003cbr\u003eThe ADM-170-S lever mount is designed for repeatable refitting to the same rail slot, so returning it to the slot you removed it from is what keeps the fit consistent.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eCan the lever tension be adjusted?\u003c\/b\u003e\u003cbr\u003eYes — the ADM-170-S has an adjustable clamping nut, so the lever tension can be tuned to the tolerances of your own Picatinny rail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich feet fit the Atlas BT10-LW17 V8 bipod?\u003c\/b\u003e\u003cbr\u003eIt takes the V8, PSR and CAL pattern Atlas quick-change feet — BT32 standard rubber feet, BT23 quick-change ski feet and BT74 Raider stainless steel cleat feet — each sold as a pair and listed in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the Atlas BT10-LW17 ARCA compatible?\u003c\/b\u003e\u003cbr\u003eNo — the BT10-LW17 is a Picatinny lever mount and no Atlas bipod in this range is natively ARCA-Swiss; ARCA compatibility comes from a separate clamp such as the \u003ca href=\"\/products\/area-419-arcalock-qd-clamp-atlas-bipod\"\u003eArea 419 ARCALOCK QD clamp for Atlas bipods\u003c\/a\u003e or the \u003ca href=\"\/products\/really-right-stuff-btc-pro-dual-arca-pic-clamp\"\u003eReally Right Stuff BTC-Pro dual ARCA and Picatinny clamp\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT10 V8 bipod with the American Defense ADM-170-S lever quick-detach mount already fitted.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307903390070,"sku":"BT10-LW17","price":315.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt10-lw17-v8-with-adm-170-s-lever-qd-mount-1.jpg?v=1785277283"},{"product_id":"atlas-bipod-bt10-v8-with-two-screw-picatinny-mount","title":"Atlas Bipod BT10 V8 with Two-Screw Picatinny Mount","description":"\u003cp\u003eThe \u003cb\u003eAtlas Bipod BT10 V8\u003c\/b\u003e, part number BT10 from B\u0026amp;T Industries, is a fully articulating precision rifle bipod supplied with the two-screw MIL-STD-1913 Picatinny clamp already fitted. It gives independent pan and cant adjustment and takes the Atlas quick-change foot system.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe V8 is the standard-height Atlas platform and the natural starting point of the range. Mount type is the only thing separating the three BT10 variants: this one arrives with the two-screw clamp bolted on, the \u003ca href=\"\/products\/atlas-bipod-bt10-lw17-v8-with-adm-170-s-lever-qd-mount\"\u003eBT10-LW17 V8 with the ADM-170-S quick-detach lever\u003c\/a\u003e moves between rifles in seconds, and the \u003ca href=\"\/products\/atlas-bipod-bt10-nc-v8-no-clamp\"\u003eBT10-NC V8 supplied with no clamp\u003c\/a\u003e suits shooters fitting a 17S-size mount of their own. For a heavier build step up to the \u003ca href=\"\/products\/atlas-bipod-bt46-lw17-psr-with-adm-170-s-lever-qd-mount\"\u003eAtlas PSR bipod\u003c\/a\u003e, or compare the whole family in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e and the wider \u003ca href=\"\/collections\/rifle-bipods\"\u003eUK rifle bipod selection\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeer stalking prone or from a high seat, where a torqued-down mount will not shift\u003c\/li\u003e\n\u003cli\u003eTarget, gallery and practical rifle competition\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting off flat ground and low cover\u003c\/li\u003e\n\u003cli\u003eNight fox and vermin control from a static firing position\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Atlas V8 — the standard-height Atlas bipod platform\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e Two-screw clamp for MIL-STD-1913 Picatinny rail, supplied fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e Independent pan and cant, for tracking a moving beast and levelling on a slope\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e Atlas quick-change system — \u003ca href=\"\/products\/atlas-bipod-bt32-standard-rubber-feet\"\u003eBT32 standard rubber feet\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 quick-change ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider stainless steel cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLeg extensions:\u003c\/b\u003e Accepts the \u003ca href=\"\/products\/atlas-bipod-bt22-3-inch-leg-extensions\"\u003eBT22 3 inch (76 mm) leg extensions\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt85-adjustable-leg-extensions\"\u003eBT85 adjustable leg extensions\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRear support:\u003c\/b\u003e Pairs with \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot rear monopods\u003c\/a\u003e such as the \u003ca href=\"\/products\/accu-shot-bt12-qk-monopod-prm-mount\"\u003eBT12-QK Precision Rail Monopod\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSeries\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas V8, standard height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-screw MIL-STD-1913 Picatinny rail clamp, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount Pattern\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-hole 17S-size Atlas pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdjustment\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eIndependent pan and cant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatible Feet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas quick-change: BT32 rubber, BT23 ski, BT74 Raider cleat (V8 \/ PSR \/ CAL pattern)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLeg Extensions\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT22 fixed 3 inch (76 mm); BT85 adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePouch\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-B, BT30-C or BT30-R standard-height Atlas bipod pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT10 \/ BT10 \/ 810040220081\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT10 V8 bipod with the two-screw Picatinny mount fitted\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bipod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich mount does the Atlas BT10 V8 need?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT10 V8 needs no separate mount, because the two-screw MIL-STD-1913 Picatinny clamp is supplied already fitted; the rifle simply needs a Picatinny rail section for it to bolt onto.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the difference between the Atlas BT10, BT10-NC and BT10-LW17?\u003c\/b\u003e\u003cbr\u003eAll three are the same Atlas V8 bipod and differ only in the mount: the BT10 has the two-screw Picatinny clamp fitted, the BT10-NC is supplied with no clamp for a 17S-size mount of your choice, and the BT10-LW17 comes with the American Defense ADM-170-S quick-detach lever fitted.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Atlas BT10 clamp directly to a Picatinny rail, or does it need an adapter?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT10 clamps directly onto any MIL-STD-1913 Picatinny rail section; if the rifle has an M-LOK handguard you add the \u003ca href=\"\/products\/atlas-bipod-bt73-m-lok-picatinny-rail\"\u003eBT73 M-LOK Picatinny rail\u003c\/a\u003e, and if it has only a sling stud the \u003ca href=\"\/products\/atlas-bipod-bt81-lil-brandi-sling-stud-adapter\"\u003eBT81 Lil' Brandi sling stud to rail adapter\u003c\/a\u003e provides one.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich feet fit the Atlas BT10 V8 bipod?\u003c\/b\u003e\u003cbr\u003eThe BT10 takes the V8, PSR and CAL pattern Atlas quick-change feet — BT32 standard rubber feet, BT23 quick-change ski feet and BT74 Raider stainless steel cleat feet — each sold as a pair, and all of them are listed in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the Atlas BT10 ARCA compatible?\u003c\/b\u003e\u003cbr\u003eNo — the Atlas BT10 is supplied with a two-screw MIL-STD-1913 Picatinny clamp, and no Atlas bipod in this range is natively ARCA-Swiss; ARCA compatibility is added with a separate clamp such as the \u003ca href=\"\/products\/area-419-arcalock-clamp-atlas-bipod\"\u003eArea 419 ARCALOCK clamp for Atlas bipods\u003c\/a\u003e, which sits in our \u003ca href=\"\/collections\/arca-bipods\"\u003eARCA bipods and clamps\u003c\/a\u003e collection.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT10 V8 bipod with the two-screw Picatinny mount already fitted.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307903455606,"sku":"BT10","price":235.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt10-v8-with-two-screw-picatinny-mount-1.jpg?v=1785209508"},{"product_id":"accu-shot-bt01-qk-monopod-sling-stud-mount","title":"Accu-Shot BT01-QK Monopod Sling Stud Mount","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT01-QK Monopod\u003c\/b\u003e, part number BT01-QK from B\u0026amp;T Industries, is the standard-height rear monopod with the QK01 Quick Knob, mounting to a standard rear sling stud on the buttstock. It adjusts from 3.50 to 4.65 inches (89–118 mm) and is the non-locking model, so elevation is set by feel on the knob alone.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT01-QK is the simplest Accu-Shot: sling stud mounting, standard height, no locking thumbnut. If you want the set height locked off, the \u003ca href=\"\/products\/accu-shot-bt04-qk-monopod-sling-stud-mount\"\u003eBT04-QK locking monopod at standard height\u003c\/a\u003e is the same idea with a thumbnut, and the \u003ca href=\"\/products\/accu-shot-bt05-qk-monopod-sling-stud-mount\"\u003eBT05-QK mid-range locking monopod\u003c\/a\u003e and \u003ca href=\"\/products\/accu-shot-bt06-qk-monopod-sling-stud-mount\"\u003eBT06-QK extended-range locking monopod\u003c\/a\u003e raise the buttstock further. If your rifle has a Picatinny rail under the butt rather than a stud, use the \u003ca href=\"\/products\/accu-shot-bt12-qk-monopod-prm-mount\"\u003eBT12-QK Precision Rail Monopod\u003c\/a\u003e instead. The full line is in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeer stalking prone, where a rear bag is one thing too many to carry\u003c\/li\u003e\n\u003cli\u003eTarget and gallery rifle, holding elevation between shots\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting off an Atlas bipod at the front\u003c\/li\u003e\n\u003cli\u003eNight fox and vermin control from a static position\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Accu-Shot rear monopod, sling stud mount, standard height\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeight range:\u003c\/b\u003e 3.50 to 4.65 inches (89–118 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e QK01 Quick Knob, adjustable from the firing position without breaking your hold\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLocking:\u003c\/b\u003e Non-locking — choose the BT04-QK if you want a thumbnut that locks the set height\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e Standard rear sling stud; the \u003ca href=\"\/products\/accu-shot-bt03-sling-stud-accessory-m1a-ar15-ar10\"\u003eBT03 sling stud accessory\u003c\/a\u003e adds one to M1-A, AR-15 and AR-10 pattern stocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront support:\u003c\/b\u003e Pairs with \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipods\u003c\/a\u003e such as the \u003ca href=\"\/products\/atlas-bipod-bt10-v8-with-two-screw-picatinny-mount\"\u003eAtlas BT10 V8 bipod\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSling stud mount monopod, standard height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHeight Range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.50 to 4.65 inches (89–118 mm) approx.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdjustment\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eQK01 Quick Knob\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLocking\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNon-locking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMounting\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard rear sling stud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT01-QK \/ BT01-QK \/ 810040220005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT01-QK monopod with the QK01 Quick Knob\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot monopod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow does the Accu-Shot BT01-QK attach to the rifle?\u003c\/b\u003e\u003cbr\u003eThe BT01-QK mounts to a standard rear sling stud on the buttstock, and on M1-A, AR-15 or AR-10 pattern stocks that do not have one the BT03 sling stud accessory adds a stud to mount it to.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat height range does the Accu-Shot BT01-QK give?\u003c\/b\u003e\u003cbr\u003eThe BT01-QK adjusts from approximately 3.50 to 4.65 inches (89–118 mm) of monopod height.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the Quick Knob on an Accu-Shot monopod?\u003c\/b\u003e\u003cbr\u003eThe Quick Knob is B\u0026amp;T's adjustment knob, and the QK01 fitted to the BT01-QK gives fast, fine elevation changes from the firing position without the shooter breaking their hold.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Accu-Shot BT01-QK lock at the set height?\u003c\/b\u003e\u003cbr\u003eNo — the BT01-QK is the non-locking standard model, and if you want a thumbnut that locks the height you have set, the BT04-QK is the locking equivalent.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT01-QK monopod fitted with the QK01 Quick Knob.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307903488374,"sku":"BT01-QK","price":80.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt01-qk-monopod-sling-stud-mount-1.jpg?v=1785269462"},{"product_id":"accu-shot-bt04-qk-monopod-sling-stud-mount","title":"Accu-Shot BT04-QK Monopod Sling Stud Mount","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT04-QK Monopod\u003c\/b\u003e, part number BT04-QK from B\u0026amp;T Industries, is the standard-height locking rear monopod with the QK01 Quick Knob and an additional thumbnut that locks the set height. It mounts to a standard rear sling stud and adjusts from 3.75 to 4.85 inches (95–123 mm).\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe locking thumbnut is what separates the BT04-QK from the \u003ca href=\"\/products\/accu-shot-bt01-qk-monopod-sling-stud-mount\"\u003eBT01-QK non-locking standard monopod\u003c\/a\u003e. Height is the next choice: the \u003ca href=\"\/products\/accu-shot-bt05-qk-monopod-sling-stud-mount\"\u003eBT05-QK mid-range locking monopod\u003c\/a\u003e and \u003ca href=\"\/products\/accu-shot-bt06-qk-monopod-sling-stud-mount\"\u003eBT06-QK extended-range locking monopod\u003c\/a\u003e lift the buttstock further. For a rifle with a Picatinny rail under the butt rather than a stud, the \u003ca href=\"\/products\/accu-shot-bt12-qk-monopod-prm-mount\"\u003eBT12-QK Precision Rail Monopod\u003c\/a\u003e is the rail-mounted equivalent. Browse them all in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeer stalking prone, where the rifle is left resting between shots\u003c\/li\u003e\n\u003cli\u003eF-Class, benchrest and target rifle, holding a set elevation exactly\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting off an Atlas bipod at the front\u003c\/li\u003e\n\u003cli\u003eNight fox and vermin control from a static position\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Accu-Shot rear monopod, sling stud mount, standard height, locking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeight range:\u003c\/b\u003e 3.75 to 4.85 inches (95–123 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e QK01 Quick Knob plus a locking thumbnut\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLocking:\u003c\/b\u003e Thumbnut locks the set height so it cannot drift\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e Standard rear sling stud; the \u003ca href=\"\/products\/accu-shot-bt03-sling-stud-accessory-m1a-ar15-ar10\"\u003eBT03 sling stud accessory\u003c\/a\u003e adds one to M1-A, AR-15 and AR-10 pattern stocks, and the \u003ca href=\"\/products\/accu-shot-bt14-threaded-magpul-prs-sling-studs\"\u003eBT14 threaded sling studs\u003c\/a\u003e do the same on a Magpul PRS stock\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront support:\u003c\/b\u003e Pairs with \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipods\u003c\/a\u003e such as the \u003ca href=\"\/products\/atlas-bipod-bt46-lw17-psr-with-adm-170-s-lever-qd-mount\"\u003eAtlas BT46-LW17 PSR bipod\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSling stud mount monopod, standard height, locking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHeight Range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.75 to 4.85 inches (95–123 mm) approx.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdjustment\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eQK01 Quick Knob plus locking thumbnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLocking\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eYes — thumbnut locks the set height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMounting\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard rear sling stud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT04-QK \/ BT04-QK \/ 810040220012\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT04-QK locking monopod with the QK01 Quick Knob\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot monopod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow does the Accu-Shot BT04-QK attach to the rifle?\u003c\/b\u003e\u003cbr\u003eThe BT04-QK mounts to a standard rear sling stud on the buttstock; where a stock has no stud, the BT03 sling stud accessory covers M1-A, AR-15 and AR-10 patterns and the BT14 threaded studs cover the Magpul PRS.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat height range does the Accu-Shot BT04-QK give?\u003c\/b\u003e\u003cbr\u003eThe BT04-QK adjusts from approximately 3.75 to 4.85 inches (95–123 mm) of monopod height.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the difference between the Accu-Shot BT01-QK and the BT04-QK?\u003c\/b\u003e\u003cbr\u003eBoth are standard-height sling stud monopods with the QK01 Quick Knob, and the BT04-QK adds a locking thumbnut that holds the set height, which the BT01-QK does not have.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Accu-Shot monopod should I choose if I need more height?\u003c\/b\u003e\u003cbr\u003eThe BT05-QK covers a mid-range of 4.80 to 5.85 inches (122–149 mm) and the BT06-QK covers an extended range of 5.70 to 6.85 inches (145–174 mm), both with the same sling stud mounting and a locking thumbnut.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT04-QK locking monopod fitted with the QK01 Quick Knob.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307903586678,"sku":"BT04-QK","price":95.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt04-qk-monopod-sling-stud-mount-1.jpg?v=1785271664"},{"product_id":"accu-shot-bt05-qk-monopod-sling-stud-mount","title":"Accu-Shot BT05-QK Monopod Sling Stud Mount","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT05-QK Monopod\u003c\/b\u003e, part number BT05-QK from B\u0026amp;T Industries, is the mid-range locking rear monopod with the QK02 Quick Knob and a thumbnut that locks the set height. It mounts to a standard rear sling stud and adjusts from 4.80 to 5.85 inches (122–149 mm), roughly an inch above the standard-height models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eHeight is the whole difference across the sling stud range. The \u003ca href=\"\/products\/accu-shot-bt04-qk-monopod-sling-stud-mount\"\u003eBT04-QK standard-height locking monopod\u003c\/a\u003e sits lower, the \u003ca href=\"\/products\/accu-shot-bt06-qk-monopod-sling-stud-mount\"\u003eBT06-QK extended-range locking monopod\u003c\/a\u003e sits higher, and the \u003ca href=\"\/products\/accu-shot-bt01-qk-monopod-sling-stud-mount\"\u003eBT01-QK non-locking standard monopod\u003c\/a\u003e is the simplest of the family. The rail-mounted twin of this height is the \u003ca href=\"\/products\/accu-shot-bt13-qk-monopod-prm-mount\"\u003eBT13-QK mid-range Precision Rail Monopod\u003c\/a\u003e. Compare them in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeer stalking prone on ground that slopes away from the firing point\u003c\/li\u003e\n\u003cli\u003eF-Class, benchrest and target rifle needing a higher rear rest\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting with a tall bipod at the front\u003c\/li\u003e\n\u003cli\u003eRifles with a high comb where the standard monopod runs out of travel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Accu-Shot rear monopod, sling stud mount, mid-range, locking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeight range:\u003c\/b\u003e 4.80 to 5.85 inches (122–149 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e QK02 Quick Knob plus a locking thumbnut\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLocking:\u003c\/b\u003e Thumbnut locks the set height so it cannot drift\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e Standard rear sling stud; the \u003ca href=\"\/products\/accu-shot-bt03-sling-stud-accessory-m1a-ar15-ar10\"\u003eBT03 sling stud accessory\u003c\/a\u003e adds one to M1-A, AR-15 and AR-10 pattern stocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront support:\u003c\/b\u003e Pairs with taller \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipods\u003c\/a\u003e such as the \u003ca href=\"\/products\/atlas-bipod-bt47-lw17-psr-tall-with-adm-170-s-lever-qd-mount\"\u003eAtlas BT47-LW17 PSR Tall bipod\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSling stud mount monopod, mid-range, locking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHeight Range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e4.80 to 5.85 inches (122–149 mm) approx.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdjustment\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eQK02 Quick Knob plus locking thumbnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLocking\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eYes — thumbnut locks the set height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMounting\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard rear sling stud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT05-QK \/ BT05-QK \/ 810040220029\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT05-QK locking monopod with the QK02 Quick Knob\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot monopod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat height range does the Accu-Shot BT05-QK give?\u003c\/b\u003e\u003cbr\u003eThe BT05-QK adjusts from approximately 4.80 to 5.85 inches (122–149 mm) of monopod height, which is the mid-range of the Accu-Shot sling stud line.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow does the Accu-Shot BT05-QK attach to the rifle?\u003c\/b\u003e\u003cbr\u003eThe BT05-QK mounts to a standard rear sling stud on the buttstock, and the BT03 sling stud accessory adds a stud to M1-A, AR-15 and AR-10 pattern stocks that do not have one.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Quick Knob does the Accu-Shot BT05-QK use?\u003c\/b\u003e\u003cbr\u003eThe BT05-QK uses the QK02 Quick Knob, the mid-range knob in the Accu-Shot line, together with a thumbnut that locks the height once set.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Accu-Shot monopod is taller than the BT05-QK?\u003c\/b\u003e\u003cbr\u003eThe BT06-QK is the extended-range model, covering approximately 5.70 to 6.85 inches (145–174 mm) with the QK03 Quick Knob and the same sling stud mounting.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT05-QK locking monopod fitted with the QK02 Quick Knob.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307903619446,"sku":"BT05-QK","price":100.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt05-qk-monopod-sling-stud-mount-1.jpg?v=1785269762"},{"product_id":"accu-shot-bt06-qk-monopod-sling-stud-mount","title":"Accu-Shot BT06-QK Monopod Sling Stud Mount","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT06-QK Monopod\u003c\/b\u003e, part number BT06-QK from B\u0026amp;T Industries, is the extended-range locking rear monopod with the QK03 Quick Knob and a thumbnut that locks the set height. It mounts to a standard rear sling stud and adjusts from 5.70 to 6.85 inches (145–174 mm), the tallest of the Accu-Shot sling stud monopods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT06-QK is the top of the sling stud range. The \u003ca href=\"\/products\/accu-shot-bt05-qk-monopod-sling-stud-mount\"\u003eBT05-QK mid-range locking monopod\u003c\/a\u003e and \u003ca href=\"\/products\/accu-shot-bt04-qk-monopod-sling-stud-mount\"\u003eBT04-QK standard-height locking monopod\u003c\/a\u003e cover the lower bands, and the \u003ca href=\"\/products\/accu-shot-bt01-qk-monopod-sling-stud-mount\"\u003eBT01-QK non-locking standard monopod\u003c\/a\u003e is the simplest. The rail-mounted equivalent at this height is the \u003ca href=\"\/products\/accu-shot-bt31-qk-monopod-prm-mount\"\u003eBT31-QK extended Precision Rail Monopod\u003c\/a\u003e. See the whole line in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHill stalking, where the ground falls away sharply in front of the firing point\u003c\/li\u003e\n\u003cli\u003eF-Class, benchrest and target rifle with a high rear rest\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting behind a tall Atlas bipod\u003c\/li\u003e\n\u003cli\u003eHeavy rifles with tall chassis stocks and high combs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Accu-Shot rear monopod, sling stud mount, extended range, locking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeight range:\u003c\/b\u003e 5.70 to 6.85 inches (145–174 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e QK03 Quick Knob plus a locking thumbnut\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLocking:\u003c\/b\u003e Thumbnut locks the set height so it cannot drift\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e Standard rear sling stud; the \u003ca href=\"\/products\/accu-shot-bt03-sling-stud-accessory-m1a-ar15-ar10\"\u003eBT03 sling stud accessory\u003c\/a\u003e adds one to M1-A, AR-15 and AR-10 pattern stocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront support:\u003c\/b\u003e Pairs with tall \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipods\u003c\/a\u003e such as the \u003ca href=\"\/products\/atlas-bipod-bt69-lw17-cal-tall-with-adm-170-s-lever-qd-mount\"\u003eAtlas BT69-LW17 CAL Tall bipod\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSling stud mount monopod, extended range, locking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHeight Range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5.70 to 6.85 inches (145–174 mm) approx.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdjustment\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eQK03 Quick Knob plus locking thumbnut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLocking\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eYes — thumbnut locks the set height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMounting\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard rear sling stud\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT06-QK \/ BT06-QK \/ 810040220036\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT06-QK locking monopod with the QK03 Quick Knob\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot monopod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat height range does the Accu-Shot BT06-QK give?\u003c\/b\u003e\u003cbr\u003eThe BT06-QK adjusts from approximately 5.70 to 6.85 inches (145–174 mm), making it the tallest monopod in the Accu-Shot sling stud line.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow does the Accu-Shot BT06-QK attach to the rifle?\u003c\/b\u003e\u003cbr\u003eThe BT06-QK mounts to a standard rear sling stud on the buttstock, and the BT03 sling stud accessory adds a stud to M1-A, AR-15 and AR-10 pattern stocks that do not have one.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Quick Knob does the Accu-Shot BT06-QK use?\u003c\/b\u003e\u003cbr\u003eThe BT06-QK uses the QK03 Quick Knob, the extended-range knob in the Accu-Shot line, together with a thumbnut that locks the height once set.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs there a rail-mounted version of the Accu-Shot BT06-QK?\u003c\/b\u003e\u003cbr\u003eThe closest rail-mounted equivalent is the BT31-QK Precision Rail Monopod, which covers approximately 5.65 to 6.60 inches (144–168 mm) and fits a 1913 Picatinny rail under the buttstock rather than a sling stud.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT06-QK locking monopod fitted with the QK03 Quick Knob.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307903684982,"sku":"BT06-QK","price":105.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt06-qk-monopod-sling-stud-mount-1.jpg?v=1785271503"},{"product_id":"accu-shot-bt12-qk-monopod-prm-mount","title":"Accu-Shot BT12-QK Monopod PRM Mount","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT12-QK Precision Rail Monopod (PRM)\u003c\/b\u003e, part number BT12-QK from B\u0026amp;T Industries, is the standard-height rail-mounted rear monopod with the QK01 Quick Knob. It clamps to a standard MIL-STD-1913 Picatinny rail section under the buttstock and adjusts from 3.75 to 4.65 inches (95–118 mm).\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe PRM models mount to a rail; the sling stud models mount to a stud. Within the PRM line the choice is height: the \u003ca href=\"\/products\/accu-shot-bt13-qk-monopod-prm-mount\"\u003eBT13-QK mid-range Precision Rail Monopod\u003c\/a\u003e and the \u003ca href=\"\/products\/accu-shot-bt31-qk-monopod-prm-mount\"\u003eBT31-QK extended Precision Rail Monopod\u003c\/a\u003e sit higher. If your buttstock has a sling stud instead of a rail, the \u003ca href=\"\/products\/accu-shot-bt04-qk-monopod-sling-stud-mount\"\u003eBT04-QK sling stud locking monopod\u003c\/a\u003e is the equivalent. Chassis and stock rail kits are listed alongside them in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChassis rifles and modern stocks with a Picatinny rail under the butt\u003c\/li\u003e\n\u003cli\u003eDeer stalking prone, replacing a rear bag with a set rest\u003c\/li\u003e\n\u003cli\u003eF-Class, benchrest and target rifle\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting off an Atlas bipod at the front\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Accu-Shot Precision Rail Monopod (PRM), standard height\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeight range:\u003c\/b\u003e 3.75 to 4.65 inches (95–118 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e QK01 Quick Knob, adjustable from the firing position\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e Standard MIL-STD-1913 Picatinny rail under the buttstock\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRail kits:\u003c\/b\u003e Adds a rail to stocks that lack one — \u003ca href=\"\/products\/accu-shot-bt52-acs-str-picatinny-rail-adapter-kit\"\u003eBT52 for Magpul ACS and STR\u003c\/a\u003e, \u003ca href=\"\/products\/accu-shot-bt78-sig-sauer-cross-buttstock-rail-kit\"\u003eBT78 for the SIG Sauer CROSS\u003c\/a\u003e, \u003ca href=\"\/products\/accu-shot-bt84-krg-10-22-bravo-rail-kit\"\u003eBT84 for the KRG Bravo\u003c\/a\u003e and \u003ca href=\"\/products\/accu-shot-bt29-sako-trg-rail-kit\"\u003eBT29 for the Sako TRG\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront support:\u003c\/b\u003e Pairs with \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipods\u003c\/a\u003e such as the \u003ca href=\"\/products\/atlas-bipod-bt65-cal-with-two-screw-picatinny-mount\"\u003eAtlas BT65 CAL bipod\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePrecision Rail Monopod (PRM), standard height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHeight Range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.75 to 4.65 inches (95–118 mm) approx.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdjustment\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eQK01 Quick Knob\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-1913 Picatinny rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT12-QK \/ BT12-QK \/ 810040220043\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT12-QK PRM monopod with the QK01 Quick Knob\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot monopod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Accu-Shot BT12-QK clamp directly to a Picatinny rail?\u003c\/b\u003e\u003cbr\u003eYes — the BT12-QK is a Precision Rail Monopod and clamps directly to a standard MIL-STD-1913 Picatinny rail section under the buttstock, with no adapter needed.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat height range does the Accu-Shot BT12-QK give?\u003c\/b\u003e\u003cbr\u003eThe BT12-QK adjusts from approximately 3.75 to 4.65 inches (95–118 mm) of monopod height.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat can I do if my buttstock has no Picatinny rail?\u003c\/b\u003e\u003cbr\u003eB\u0026amp;T make stock-specific rail kits that add one: the BT52 for Magpul ACS and STR stocks, the BT78 for the SIG Sauer CROSS, the BT84 for the KRG Bravo chassis on the Ruger 10\/22, and the BT29 for the Sako TRG, which is compatible with the BT12-QK specifically.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the difference between a PRM monopod and a sling stud monopod?\u003c\/b\u003e\u003cbr\u003eA PRM monopod such as the BT12-QK clamps to a Picatinny rail, while a sling stud monopod such as the BT04-QK screws to a standard rear sling stud, so the choice is decided by what your buttstock already has.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT12-QK Precision Rail Monopod fitted with the QK01 Quick Knob.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307903750518,"sku":"BT12-QK","price":110.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt12-qk-monopod-prm-mount-1.jpg?v=1785271688"},{"product_id":"accu-shot-bt13-qk-monopod-prm-mount","title":"Accu-Shot BT13-QK Monopod PRM Mount","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT13-QK Precision Rail Monopod (PRM)\u003c\/b\u003e, part number BT13-QK from B\u0026amp;T Industries, is the mid-height rail-mounted rear monopod with the QK02 Quick Knob. It clamps to a standard MIL-STD-1913 Picatinny rail section under the buttstock and adjusts from 4.75 to 5.65 inches (121–144 mm).\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eHeight is the only difference within the PRM line: the \u003ca href=\"\/products\/accu-shot-bt12-qk-monopod-prm-mount\"\u003eBT12-QK standard-height Precision Rail Monopod\u003c\/a\u003e sits lower and the \u003ca href=\"\/products\/accu-shot-bt31-qk-monopod-prm-mount\"\u003eBT31-QK extended Precision Rail Monopod\u003c\/a\u003e sits higher. If your buttstock carries a sling stud rather than a rail, the \u003ca href=\"\/products\/accu-shot-bt05-qk-monopod-sling-stud-mount\"\u003eBT05-QK mid-range sling stud monopod\u003c\/a\u003e is the matching height. The full line is in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChassis rifles with a Picatinny rail under the butt and a high comb\u003c\/li\u003e\n\u003cli\u003eDeer stalking prone on ground that falls away in front\u003c\/li\u003e\n\u003cli\u003eF-Class, benchrest and target rifle needing a higher rear rest\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting behind a tall Atlas bipod\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Accu-Shot Precision Rail Monopod (PRM), mid-range height\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeight range:\u003c\/b\u003e 4.75 to 5.65 inches (121–144 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e QK02 Quick Knob, adjustable from the firing position\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e Standard MIL-STD-1913 Picatinny rail under the buttstock\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRail kits:\u003c\/b\u003e Adds a rail where a stock lacks one — \u003ca href=\"\/products\/accu-shot-bt52-acs-str-picatinny-rail-adapter-kit\"\u003eBT52 for Magpul ACS and STR\u003c\/a\u003e, \u003ca href=\"\/products\/accu-shot-bt78-sig-sauer-cross-buttstock-rail-kit\"\u003eBT78 for the SIG Sauer CROSS\u003c\/a\u003e and \u003ca href=\"\/products\/accu-shot-bt84-krg-10-22-bravo-rail-kit\"\u003eBT84 for the KRG Bravo\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront support:\u003c\/b\u003e Pairs with \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipods\u003c\/a\u003e such as the \u003ca href=\"\/products\/atlas-bipod-bt72-super-cal-with-2-screw-mount\"\u003eAtlas BT72 Super CAL bipod\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePrecision Rail Monopod (PRM), mid-range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHeight Range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e4.75 to 5.65 inches (121–144 mm) approx.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdjustment\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eQK02 Quick Knob\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-1913 Picatinny rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT13-QK \/ BT13-QK \/ 810040220050\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT13-QK PRM monopod with the QK02 Quick Knob\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot monopod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat height range does the Accu-Shot BT13-QK give?\u003c\/b\u003e\u003cbr\u003eThe BT13-QK adjusts from approximately 4.75 to 5.65 inches (121–144 mm), which is the mid-range of the Precision Rail Monopod line.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Accu-Shot BT13-QK clamp directly to a Picatinny rail?\u003c\/b\u003e\u003cbr\u003eYes — the BT13-QK clamps directly to a standard MIL-STD-1913 Picatinny rail section under the buttstock, with no adapter needed.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Quick Knob does the Accu-Shot BT13-QK use?\u003c\/b\u003e\u003cbr\u003eThe BT13-QK uses the QK02 Quick Knob, the mid-range knob in the Accu-Shot line, which allows elevation to be changed without breaking your hold.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat can I do if my buttstock has no Picatinny rail?\u003c\/b\u003e\u003cbr\u003eB\u0026amp;T make stock-specific rail kits that add one, including the BT52 for Magpul ACS and STR stocks, the BT78 for the SIG Sauer CROSS and the BT84 for the KRG Bravo chassis on the Ruger 10\/22.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT13-QK Precision Rail Monopod fitted with the QK02 Quick Knob.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307903816054,"sku":"BT13-QK","price":115.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt13-qk-monopod-prm-mount-1.jpg?v=1785271706"},{"product_id":"accu-shot-bt31-qk-monopod-prm-mount","title":"Accu-Shot BT31-QK Monopod PRM Mount","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT31-QK Precision Rail Monopod (PRM)\u003c\/b\u003e, part number BT31-QK from B\u0026amp;T Industries, is the extended-height rail-mounted rear monopod with the QK03 Quick Knob. It clamps to a standard MIL-STD-1913 Picatinny rail section under the buttstock and adjusts from 5.65 to 6.60 inches (144–168 mm), the tallest monopod in the PRM line.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT31-QK is the top of the rail-mounted range. The \u003ca href=\"\/products\/accu-shot-bt13-qk-monopod-prm-mount\"\u003eBT13-QK mid-range Precision Rail Monopod\u003c\/a\u003e and \u003ca href=\"\/products\/accu-shot-bt12-qk-monopod-prm-mount\"\u003eBT12-QK standard-height Precision Rail Monopod\u003c\/a\u003e cover the lower bands. On a buttstock with a sling stud rather than a rail, the \u003ca href=\"\/products\/accu-shot-bt06-qk-monopod-sling-stud-mount\"\u003eBT06-QK extended-range sling stud monopod\u003c\/a\u003e is the matching height. Compare them in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHill stalking, where the ground drops away sharply in front of the rifle\u003c\/li\u003e\n\u003cli\u003eHeavy chassis rifles with tall combs and a rail under the butt\u003c\/li\u003e\n\u003cli\u003eF-Class, benchrest and target rifle with a high rear rest\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting behind a tall or 5-H Atlas bipod\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Accu-Shot Precision Rail Monopod (PRM), extended range\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeight range:\u003c\/b\u003e 5.65 to 6.60 inches (144–168 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e QK03 Quick Knob, adjustable from the firing position\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e Standard MIL-STD-1913 Picatinny rail under the buttstock\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRail kits:\u003c\/b\u003e Adds a rail where a stock lacks one — \u003ca href=\"\/products\/accu-shot-bt52-acs-str-picatinny-rail-adapter-kit\"\u003eBT52 for Magpul ACS and STR\u003c\/a\u003e, \u003ca href=\"\/products\/accu-shot-bt78-sig-sauer-cross-buttstock-rail-kit\"\u003eBT78 for the SIG Sauer CROSS\u003c\/a\u003e and \u003ca href=\"\/products\/accu-shot-bt84-krg-10-22-bravo-rail-kit\"\u003eBT84 for the KRG Bravo\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront support:\u003c\/b\u003e Pairs with the heavyweight \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipods\u003c\/a\u003e such as the \u003ca href=\"\/products\/atlas-bipod-bt35-nc-5-h-no-clamp\"\u003eAtlas BT35-NC 5-H bipod\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePrecision Rail Monopod (PRM), extended range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHeight Range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5.65 to 6.60 inches (144–168 mm) approx.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdjustment\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eQK03 Quick Knob\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-1913 Picatinny rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT31-QK \/ BT31-QK \/ 810040220067\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT31-QK PRM monopod with the QK03 Quick Knob\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot monopod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat height range does the Accu-Shot BT31-QK give?\u003c\/b\u003e\u003cbr\u003eThe BT31-QK adjusts from approximately 5.65 to 6.60 inches (144–168 mm), making it the tallest of the Accu-Shot Precision Rail Monopods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Accu-Shot BT31-QK clamp directly to a Picatinny rail?\u003c\/b\u003e\u003cbr\u003eYes — the BT31-QK clamps directly to a standard MIL-STD-1913 Picatinny rail section under the buttstock, with no adapter needed.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Quick Knob does the Accu-Shot BT31-QK use?\u003c\/b\u003e\u003cbr\u003eThe BT31-QK uses the QK03 Quick Knob, the extended-range knob in the Accu-Shot line.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat can I do if my buttstock has no Picatinny rail?\u003c\/b\u003e\u003cbr\u003eB\u0026amp;T make stock-specific rail kits that add one, including the BT52 for Magpul ACS and STR stocks, the BT78 for the SIG Sauer CROSS and the BT84 for the KRG Bravo chassis on the Ruger 10\/22.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT31-QK Precision Rail Monopod fitted with the QK03 Quick Knob.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307903848822,"sku":"BT31-QK","price":120.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt31-qk-monopod-prm-mount-1.jpg?v=1785269356"},{"product_id":"accu-shot-bt57-qk-accuracy-international-at-asaiat-monopod","title":"Accu-Shot BT57-QK Accuracy International AT (ASAIAT) Monopod","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT57-QK ASAIAT Monopod\u003c\/b\u003e, part number BT57-QK from B\u0026amp;T Industries, is the rear monopod made specifically for the Accuracy International AT rifle. It fits the AT stock directly rather than a sling stud or rail, adjusts from 2.66 to 3.83 inches (68–97 mm) and uses the Quick Knob for elevation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT57-QK is the AT rifle's own monopod. The \u003ca href=\"\/products\/accu-shot-bt08-qk-accuracy-international-asai-monopod\"\u003eBT08-QK ASAI monopod for AE, AW and AICS pattern stocks\u003c\/a\u003e covers the older and wider AI family and a taller height band, so the two are not interchangeable. On a non-AI rifle, the \u003ca href=\"\/products\/accu-shot-bt12-qk-monopod-prm-mount\"\u003eBT12-QK Precision Rail Monopod\u003c\/a\u003e or the \u003ca href=\"\/products\/accu-shot-bt04-qk-monopod-sling-stud-mount\"\u003eBT04-QK sling stud locking monopod\u003c\/a\u003e are the equivalents. See the full line in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAccuracy International AT rifles\u003c\/li\u003e\n\u003cli\u003eDeer stalking and long-range shooting with an AT-stocked rifle\u003c\/li\u003e\n\u003cli\u003eTarget, F-Class and practical rifle competition\u003c\/li\u003e\n\u003cli\u003eShooters wanting a low, compact rear rest rather than a tall one\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Accu-Shot ASAIAT monopod for the Accuracy International AT\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e Accuracy International AT\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeight range:\u003c\/b\u003e 2.66 to 3.83 inches (68–97 mm) — the lowest in the Accu-Shot line\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e Quick Knob elevation control\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpares:\u003c\/b\u003e \u003ca href=\"\/products\/accu-shot-bt0857-b-replacement-bolt-m6-80-80\"\u003eBT0857-B standard replacement bolt\u003c\/a\u003e and \u003ca href=\"\/products\/accu-shot-bt0857-lb-replacement-bolt-m6-80-100\"\u003eBT0857-LB long replacement bolt\u003c\/a\u003e, plus the \u003ca href=\"\/products\/accu-shot-bt07-tac-cap-steel-replacement-cap\"\u003eBT07 Tac-Cap steel replacement cap\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront support:\u003c\/b\u003e Pairs with the \u003ca href=\"\/products\/atlas-bipod-bt19-accuracy-international-spigot-aais\"\u003eBT19 Accuracy International spigot\u003c\/a\u003e and an NC Atlas bipod\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAccuracy International AT (ASAIAT) monopod\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAccuracy International AT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHeight Range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.66 to 3.83 inches (68–97 mm) approx.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdjustment\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eQuick Knob\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eReplacement Bolts\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT0857-B (M6 × 80 × 80); BT0857-LB (M6 × 80 × 100, for use with length-of-pull spacers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT57-QK \/ BT57-QK \/ 810040220074\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT57-QK ASAIAT monopod with Quick Knob\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot monopod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich rifle does the Accu-Shot BT57-QK fit?\u003c\/b\u003e\u003cbr\u003eThe BT57-QK is made specifically for the Accuracy International AT, and it is not the correct monopod for AE, AW or AICS pattern stocks, which take the BT08-QK instead.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat height range does the Accu-Shot BT57-QK give?\u003c\/b\u003e\u003cbr\u003eThe BT57-QK adjusts from approximately 2.66 to 3.83 inches (68–97 mm), the lowest height band in the Accu-Shot monopod line.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Accu-Shot BT57-QK need a rail or a sling stud?\u003c\/b\u003e\u003cbr\u003eNo — the BT57-QK mounts to the Accuracy International AT stock itself, so it needs neither a Picatinny rail nor a sling stud.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich replacement bolt does the Accu-Shot BT57-QK take?\u003c\/b\u003e\u003cbr\u003eThe standard bolt is the BT0857-B in M6 × 80 × 80, and the longer BT0857-LB in M6 × 80 × 100 is required when additional length-of-pull spacers are fitted.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT57-QK ASAIAT monopod fitted with the Quick Knob.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307903947126,"sku":"BT57-QK","price":170.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt57-qk-accuracy-international-at-asaiat-monopod-1.jpg?v=1785269656"},{"product_id":"atlas-bipod-bt75-raider-cleat-feet-for-5-h-super-cal","title":"Atlas Bipod BT75 Raider Cleat Feet for 5-H \u0026 Super CAL","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT75 Raider Cleat Feet for 5-H and Super CAL\u003c\/b\u003e, part number BT75 from B\u0026amp;T Industries, are one-piece machined stainless steel cleat feet sized for the 5-H and Super CAL series Atlas bipods. The aggressive cleat profile bites into barricades, rock and hard ground. Sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT75 is the heavyweight cleat foot. On the same 5-H and Super CAL bipods, the \u003ca href=\"\/products\/atlas-bipod-bt66-5-h-super-cal-bas-ski-feet\"\u003eBT66 BAS ski feet\u003c\/a\u003e spread the load on soft ground and the \u003ca href=\"\/products\/atlas-bipod-bt55-5-h-super-cal-standard-rubber-feet\"\u003eBT55 standard rubber feet\u003c\/a\u003e are the factory item. If your bipod is a V8, PSR or CAL model, the smaller \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider cleat feet\u003c\/a\u003e are the correct part instead. Everything that fits an Atlas is in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy F-Class, benchrest and long-range rifles on hard firing points\u003c\/li\u003e\n\u003cli\u003ePractical and service rifle stages shot off barricades and props\u003c\/li\u003e\n\u003cli\u003eHill shooting on rock, scree and frozen ground\u003c\/li\u003e\n\u003cli\u003eLarge-calibre rifles where recoil would skate a rubber foot\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Raider cleat feet for 5-H and Super CAL, sold as a pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e One-piece machined stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt35-nc-5-h-no-clamp\"\u003eAtlas 5-H\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt72-super-cal-with-2-screw-mount\"\u003eAtlas Super CAL\u003c\/a\u003e bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrip:\u003c\/b\u003e Aggressive cleat profile for barricades, rock and hard ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNot for:\u003c\/b\u003e V8, PSR and CAL bipods, which take the BT74 instead\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRaider cleat feet, pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eStainless steel, one-piece machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5-H and Super CAL Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDoes Not Fit\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eV8, PSR and CAL Atlas bipods (use BT74)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT75 \/ BT75 \/ 810040220739\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2× Atlas BT75 Raider cleat feet for 5-H and Super CAL (one pair)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThese Atlas feet are dispatched tracked from our UK warehouse — no import duties and no customs delays — and are backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods do the BT75 Raider cleat feet fit?\u003c\/b\u003e\u003cbr\u003eThe BT75 Raider cleat feet fit the 5-H and Super CAL series Atlas bipods, which includes the BT35 and BT72 in all of their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT75 fit a V8, PSR or CAL Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNo — those bipods use a smaller foot and need the BT74 Raider cleat feet, which are a separate part; the BT75 and BT74 are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow many feet are in a set?\u003c\/b\u003e\u003cbr\u003eThe BT75 is sold as a pair, which is one complete set for a single bipod.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat are cleat feet best used on?\u003c\/b\u003e\u003cbr\u003eCleat feet are at their best on hard surfaces such as barricades, rock, concrete and frozen ground, where the stainless steel cleats bite rather than slide under recoil.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains two Atlas BT75 Raider cleat feet for 5-H and Super CAL bipods, which is one pair.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904012662,"sku":"BT75","price":94.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt75-raider-cleat-feet-for-5-h-super-cal-1.jpg?v=1785269462"},{"product_id":"atlas-bipod-bt74-raider-cleat-feet","title":"Atlas Bipod BT74 Raider Cleat Feet","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT74 Raider Cleat Feet\u003c\/b\u003e, part number BT74 from B\u0026amp;T Industries, are one-piece machined stainless steel cleat feet for V8, PSR and CAL model Atlas bipods. The aggressive cleat profile bites into barricades, rock and hard ground where a rubber foot would slide. Sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eAtlas feet come in three characters. The BT74 Raider cleats grip hard surfaces; the \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 quick-change ski feet\u003c\/a\u003e spread the load on soft ground; and the \u003ca href=\"\/products\/atlas-bipod-bt32-standard-rubber-feet\"\u003eBT32 standard rubber feet\u003c\/a\u003e are the factory item. All three fit the same V8, PSR and CAL bipods. If your bipod is a 5-H or Super CAL, you need the larger \u003ca href=\"\/products\/atlas-bipod-bt75-raider-cleat-feet-for-5-h-super-cal\"\u003eBT75 Raider cleat feet for 5-H and Super CAL\u003c\/a\u003e instead. More options are in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePractical and service rifle stages shot off barricades and props\u003c\/li\u003e\n\u003cli\u003eHill stalking on rock, scree and frozen ground\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting from timber and concrete rests\u003c\/li\u003e\n\u003cli\u003eAny surface where a rubber foot skates under recoil\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Raider cleat feet, sold as a pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e One-piece machined stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e V8, PSR and CAL model Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrip:\u003c\/b\u003e Aggressive cleat profile for barricades, rock and hard ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNot for:\u003c\/b\u003e 5-H and Super CAL bipods, which take the BT75 instead\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRaider cleat feet, pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eStainless steel, one-piece machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eV8, PSR and CAL model Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDoes Not Fit\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5-H and Super CAL Atlas bipods (use BT75)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT74 \/ BT74 \/ 810040220722\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2× Atlas BT74 Raider cleat feet (one pair)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThese Atlas feet are dispatched tracked from our UK warehouse — no import duties and no customs delays — and are backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods do the BT74 Raider cleat feet fit?\u003c\/b\u003e\u003cbr\u003eThe BT74 Raider cleat feet fit the V8, PSR and CAL model Atlas bipods, which includes the BT10, BT46, BT47, BT65 and BT69 in all of their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT74 fit a 5-H or Super CAL Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNo — the 5-H and Super CAL bipods use a larger foot and need the BT75 Raider cleat feet, which are a separate part.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow many feet are in a set?\u003c\/b\u003e\u003cbr\u003eThe BT74 is sold as a pair, which is one complete set for a single bipod.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhen should I choose cleat feet over ski feet?\u003c\/b\u003e\u003cbr\u003eCleat feet are the better choice on hard surfaces such as barricades, rock and frozen ground where grip matters, while ski feet spread the load and track more smoothly on soft or loose ground.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains two Atlas BT74 Raider cleat feet, which is one pair.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904078198,"sku":"BT74","price":74.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt74-raider-cleat-feet-1.jpg?v=1785271664"},{"product_id":"atlas-bipod-bt73-m-lok-picatinny-rail","title":"Atlas Bipod BT73 M-LOK Picatinny Rail","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT73 M-LOK Picatinny Rail\u003c\/b\u003e, part number BT73 from B\u0026amp;T Industries, adds a short MIL-STD-1913 Picatinny rail section to any M-LOK compatible handguard, forend or buttstock. It is the simple way to run a two-screw or ADM lever-mount Atlas bipod on an M-LOK rifle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT73 gives you a rail; the \u003ca href=\"\/products\/atlas-bipod-bt70-m-lok-adaptor\"\u003eAtlas BT70 M-LOK adaptor\u003c\/a\u003e instead bolts an NC (No Clamp) Atlas bipod straight into the M-LOK slot with no rail at all, which is lower and lighter. If you also want flush cup sling sockets in the same fitting, the \u003ca href=\"\/products\/atlas-bipod-bt80-m-lok-flush-cup-rail\"\u003eAtlas BT80 M-LOK flush cup rail\u003c\/a\u003e combines both. Bipods to go on it are in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePractical and service rifle builds on M-LOK handguards\u003c\/li\u003e\n\u003cli\u003eAdding Atlas bipod mounting to an AR-pattern or chassis rifle\u003c\/li\u003e\n\u003cli\u003eNight fox and vermin rifles built on M-LOK forends\u003c\/li\u003e\n\u003cli\u003eShooters who want a Picatinny interface rather than a direct M-LOK mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e M-LOK to MIL-STD-1913 Picatinny rail section\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e M-LOK compatible hand guards, forends and buttstocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTakes:\u003c\/b\u003e Two-screw and ADM lever-mount Atlas bipods, and Picatinny monopods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAlternative:\u003c\/b\u003e The BT70 M-LOK adaptor mounts an NC Atlas bipod directly, without a rail\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM-LOK to 1913 Picatinny rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM-LOK compatible hand guards, forends and buttstocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAccepts\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAny MIL-STD-1913 Picatinny bipod or monopod mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT73 \/ BT73 \/ 810040220715\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT73 M-LOK rail with fixings\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas rail is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the Atlas BT73 M-LOK rail do?\u003c\/b\u003e\u003cbr\u003eThe BT73 bolts into an M-LOK slot and provides a short MIL-STD-1913 Picatinny rail section, so a Picatinny-mount bipod or monopod can be fitted to an M-LOK handguard, forend or buttstock.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShould I choose the BT73 rail or the BT70 M-LOK adaptor?\u003c\/b\u003e\u003cbr\u003eChoose the BT73 if your bipod has a two-screw or ADM lever Picatinny clamp, and choose the BT70 M-LOK adaptor if you have an NC (No Clamp) Atlas bipod, because the BT70 mounts it directly into the M-LOK slot without a rail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the Atlas BT73 KeyMod compatible?\u003c\/b\u003e\u003cbr\u003eNo — the BT73 is an M-LOK fitting only and will not mount to a KeyMod handguard.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich bipods will fit the Atlas BT73?\u003c\/b\u003e\u003cbr\u003eAny bipod with a standard MIL-STD-1913 Picatinny clamp will fit, including the two-screw Atlas models such as the BT10 and BT65 and the ADM lever models such as the BT46-LW17.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT73 M-LOK rail with its fixings.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904110966,"sku":"BT73","price":34.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt73-m-lok-picatinny-rail-1.jpg?v=1785269431"},{"product_id":"atlas-bipod-bt1517-rail-mounting-fastener-set","title":"Atlas Bipod BT1517 Rail Mounting Fastener Set","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT1517 Rail Mounting Fastener Set\u003c\/b\u003e, part number BT1517 from B\u0026amp;T Industries, is the fixing kit for mounting B\u0026amp;T's 1913 rails. It contains two 10-32 T-nuts and two 10-32 × ¾ inch (19 mm) button head screws, and is compatible with both the BT15 and BT17 rails.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis is the fastener set, not a rail. The rails themselves are the \u003ca href=\"\/products\/atlas-bipod-bt15-3-35-inch-picatinny-rail\"\u003eAtlas BT15 3.35 inch radius-back Picatinny rail\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt17-4-inch-1913-picatinny-rail\"\u003eAtlas BT17 4 inch flat-back Picatinny rail\u003c\/a\u003e. If you are replacing nuts for the AFAR rail kit rather than these rails, the correct part is the \u003ca href=\"\/products\/atlas-bipod-bt28-n-afar-rail-nuts\"\u003eBT28-N AFAR rail nuts\u003c\/a\u003e. Everything else is in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFitting a new BT15 or BT17 rail to a stock\u003c\/li\u003e\n\u003cli\u003eReplacing fixings lost during a stock refinish or rebuild\u003c\/li\u003e\n\u003cli\u003eGunsmiths and stockers building rail mounting into a rifle\u003c\/li\u003e\n\u003cli\u003eKeeping a spare set with the rail\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Rail mounting fastener set\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eContents:\u003c\/b\u003e 2× 10-32 T-nuts and 2× 10-32 × ¾ inch (19 mm) button head screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e BT15 and BT17 Atlas rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread:\u003c\/b\u003e 10-32\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRail mounting fastener set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eContents\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2× 10-32 T-nuts, 2× 10-32 × ¾ inch (19 mm) button head screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas BT15 and BT17 rails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eThread\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e10-32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT1517 \/ BT1517 \/ 810040220401\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2× 10-32 T-nuts\u003c\/li\u003e\n\u003cli\u003e2× 10-32 × ¾ inch (19 mm) button head screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis fastener set is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas rails does the BT1517 fastener set fit?\u003c\/b\u003e\u003cbr\u003eThe BT1517 set fits both the Atlas BT15 3.35 inch rail and the Atlas BT17 4 inch rail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the BT1517 set contain?\u003c\/b\u003e\u003cbr\u003eThe BT1517 set contains two 10-32 T-nuts and two 10-32 × ¾ inch (19 mm) button head screws.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDo the Atlas BT15 and BT17 rails come with fixings?\u003c\/b\u003e\u003cbr\u003eThe BT1517 fastener set is listed and sold as a separate item, so order it alongside the rail if you need the T-nuts and screws.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the BT1517 the right part for the AFAR rail kit?\u003c\/b\u003e\u003cbr\u003eNo — the AFAR rail kit uses the BT28-N AFAR rail nuts, which are a different part from the BT1517 set.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains two 10-32 T-nuts and two 10-32 × ¾ inch (19 mm) button head screws.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904143734,"sku":"BT1517","price":6.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt1517-rail-mounting-fastener-set-1.jpg?v=1785269833"},{"product_id":"accu-shot-bt08-qk-accuracy-international-asai-monopod","title":"Accu-Shot BT08-QK Accuracy International (ASAI) Monopod","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT08-QK ASAI Monopod\u003c\/b\u003e, part number BT08-QK from B\u0026amp;T Industries, is the rear monopod made specifically for Accuracy International AE, AW and AICS pattern stocks. It fits the AI stockside directly rather than a sling stud or rail, adjusts from 3.60 to 4.55 inches (91–116 mm) and uses the Quick Knob for elevation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis is the AI-specific Accu-Shot for AE, AW and AICS pattern stocks. The \u003ca href=\"\/products\/accu-shot-bt57-qk-accuracy-international-at-asaiat-monopod\"\u003eBT57-QK ASAIAT monopod for the Accuracy International AT\u003c\/a\u003e is the AT rifle's own version and covers a different height band. For a rifle that is not an AI, the \u003ca href=\"\/products\/accu-shot-bt12-qk-monopod-prm-mount\"\u003eBT12-QK Precision Rail Monopod\u003c\/a\u003e mounts to a Picatinny rail and the \u003ca href=\"\/products\/accu-shot-bt04-qk-monopod-sling-stud-mount\"\u003eBT04-QK sling stud locking monopod\u003c\/a\u003e mounts to a stud. The whole line sits in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAccuracy International AE, AW and AICS pattern rifles\u003c\/li\u003e\n\u003cli\u003eDeer stalking and long-range work with an AI-stocked rifle\u003c\/li\u003e\n\u003cli\u003eF-Class, benchrest and target rifle on an AI chassis\u003c\/li\u003e\n\u003cli\u003ePractical and service rifle where the AI stock is standard kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Accu-Shot ASAI monopod for Accuracy International stocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e AI AE, AW and AICS pattern stocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHeight range:\u003c\/b\u003e 3.60 to 4.55 inches (91–116 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e Quick Knob elevation control\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBracket option:\u003c\/b\u003e The \u003ca href=\"\/products\/accu-shot-bt39-accuracy-international-monopod-bracket\"\u003eBT39 Accuracy International monopod bracket\u003c\/a\u003e adapts the BT08-QK to AI \"Gen 2\" style stocksides\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpares:\u003c\/b\u003e \u003ca href=\"\/products\/accu-shot-bt0857-b-replacement-bolt-m6-80-80\"\u003eBT0857-B standard replacement bolt\u003c\/a\u003e and \u003ca href=\"\/products\/accu-shot-bt0857-lb-replacement-bolt-m6-80-100\"\u003eBT0857-LB long replacement bolt\u003c\/a\u003e, plus the \u003ca href=\"\/products\/accu-shot-bt07-tac-cap-steel-replacement-cap\"\u003eBT07 Tac-Cap steel replacement cap\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAccuracy International (ASAI) monopod\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAI AE, AW and AICS pattern stocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHeight Range\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.60 to 4.55 inches (91–116 mm) approx.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdjustment\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eQuick Knob\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eReplacement Bolts\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT0857-B (M6 × 80 × 80); BT0857-LB (M6 × 80 × 100, for use with length-of-pull spacers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT08-QK \/ BT08-QK \/ 810040220678\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT08-QK ASAI monopod with Quick Knob\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot monopod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich rifles does the Accu-Shot BT08-QK fit?\u003c\/b\u003e\u003cbr\u003eThe BT08-QK is made for Accuracy International AE, AW and AICS pattern stocks, and it is not the correct monopod for the Accuracy International AT, which uses the BT57-QK instead.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat height range does the Accu-Shot BT08-QK give?\u003c\/b\u003e\u003cbr\u003eThe BT08-QK adjusts from approximately 3.60 to 4.55 inches (91–116 mm) of monopod height.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Accu-Shot BT08-QK need a rail or a sling stud?\u003c\/b\u003e\u003cbr\u003eNo — the BT08-QK mounts to the Accuracy International stockside itself, so it needs neither a Picatinny rail nor a sling stud.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich replacement bolt does the Accu-Shot BT08-QK take?\u003c\/b\u003e\u003cbr\u003eThe standard bolt is the BT0857-B in M6 × 80 × 80, and the longer BT0857-LB in M6 × 80 × 100 is required when additional length-of-pull spacers are fitted.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT08-QK fit an AI \"Gen 2\" stockside?\u003c\/b\u003e\u003cbr\u003eFitting the BT08-QK to an Accuracy International \"Gen 2\" style stockside requires the BT39 Accuracy International monopod bracket, which is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT08-QK ASAI monopod fitted with the Quick Knob.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904209270,"sku":"BT08-QK","price":190.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt08-qk-accuracy-international-asai-monopod-1.jpg?v=1785269763"},{"product_id":"atlas-bipod-bt30-b-bipod-pouch-black","title":"Atlas Bipod BT30-B Bipod Pouch Black","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT30-B Bipod Pouch in Black\u003c\/b\u003e, part number BT30-B from B\u0026amp;T Industries, is the genuine Atlas carry pouch for V8, standard-height PSR and CAL model bipods. It is cut to the Atlas footprint exactly, so the bipod goes in folded and comes out without a fight.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe same pouch is stocked in three colours: this Black version, the \u003ca href=\"\/products\/atlas-bipod-bt30-c-bipod-pouch-coyote-brown\"\u003eAtlas BT30-C bipod pouch in Coyote Brown\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt30-r-bipod-pouch-ranger-green\"\u003eAtlas BT30-R bipod pouch in Ranger Green\u003c\/a\u003e. If your bipod is a Tall model, the \u003ca href=\"\/products\/atlas-bipod-bt30-tall-bipod-pouch-coyote-brown\"\u003eBT30 tall Atlas bipod pouch\u003c\/a\u003e covers both standard and tall heights, and for a 5-H or Super CAL the \u003ca href=\"\/products\/atlas-bipod-bt30-s5-large-bipod-pouch\"\u003eBT30-S5 large Atlas bipod pouch\u003c\/a\u003e is the correct size. Browse the rest in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeer stalkers carrying the bipod on the belt or in a rucksack\u003c\/li\u003e\n\u003cli\u003eKeeping a quick-detach bipod protected between stages\u003c\/li\u003e\n\u003cli\u003eTarget and F-Class shooters transporting kit to the firing point\u003c\/li\u003e\n\u003cli\u003eAnyone who removes the bipod for the walk in\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Atlas bipod carry pouch\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eColour:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e V8, standard-height PSR and CAL model Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFit:\u003c\/b\u003e Made to the Atlas footprint by B\u0026amp;T Industries rather than a generic pouch\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBipod pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColour\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eV8, standard-height PSR and CAL Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOther Sizes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30 tall pouch (standard and tall); BT30-S5 large pouch (5-H and Super CAL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-B \/ BT30-B \/ 810040220470\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT30-B bipod pouch in Black\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas pouch is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods does the BT30-B pouch fit?\u003c\/b\u003e\u003cbr\u003eThe BT30-B pouch fits the V8, standard-height PSR and CAL model Atlas bipods, which includes the BT10, BT46, BT65 and their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT30-B fit a Tall Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNo — the Tall models such as the BT47 PSR Tall and BT69 CAL Tall need the BT30 tall pouch, which is cut to take both standard and tall height bipods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich pouch do I need for a 5-H or Super CAL bipod?\u003c\/b\u003e\u003cbr\u003eThe BT30-S5 large Atlas bipod pouch is the correct size for the 5-H and Super CAL bipods, because the standard BT30-B is cut for the smaller V8, PSR and CAL models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat colours is this Atlas pouch available in?\u003c\/b\u003e\u003cbr\u003eThe standard-height Atlas pouch is stocked in Black as the BT30-B, Coyote Brown as the BT30-C and Ranger Green as the BT30-R.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT30-B bipod pouch in Black.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904274806,"sku":"BT30-B","price":59.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt30-b-bipod-pouch-black-1.jpg?v=1785300028"},{"product_id":"atlas-bipod-bt17-4-inch-1913-picatinny-rail","title":"Atlas Bipod BT17 4 Inch 1913 Picatinny Rail","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT17 4 Inch 1913 Picatinny Rail\u003c\/b\u003e, part number BT17 from B\u0026amp;T Industries, is a flush cup MIL-STD-1913 rail with a flat back, 4 inches (102 mm) long. It accommodates stock hole patterns with a centre-to-centre spacing of 2.2 to 3.5 inches (56–89 mm), giving bipod and monopod rail mounting on flat-bottomed forends.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe flat back is what separates the BT17 from the radiused \u003ca href=\"\/products\/atlas-bipod-bt15-3-35-inch-picatinny-rail\"\u003eAtlas BT15 3.35 inch Picatinny rail\u003c\/a\u003e, which suits rounded forends and a tighter hole spacing. For short stocks, the \u003ca href=\"\/products\/atlas-bipod-bt34-2-05-inch-1913-rail\"\u003eAtlas BT34 2.05 inch radius-back rail\u003c\/a\u003e and the slotted \u003ca href=\"\/products\/atlas-bipod-bt49-2-05-inch-adjustable-rail\"\u003eAtlas BT49 2.05 inch adjustable rail\u003c\/a\u003e are the compact options. Fixings are the \u003ca href=\"\/products\/atlas-bipod-bt1517-rail-mounting-fastener-set\"\u003eBT1517 rail mounting fastener set\u003c\/a\u003e. See the rest in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTarget, F-Class and benchrest stocks with a flat-bottomed forend\u003c\/li\u003e\n\u003cli\u003eAdding Picatinny mounting for an Atlas bipod to a rifle that has none\u003c\/li\u003e\n\u003cli\u003eStalking rifles being converted to rail-mounted support\u003c\/li\u003e\n\u003cli\u003eStocks with existing holes spaced 2.2 to 3.5 inches (56–89 mm) apart\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e MIL-STD-1913 Picatinny rail with flush cups, flat back\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength:\u003c\/b\u003e 4 inches (102 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHole spacing:\u003c\/b\u003e 2.2 to 3.5 inches (56–89 mm) centre-to-centre, approximate\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBack profile:\u003c\/b\u003e Flat, for flat-bottomed forends\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFixings:\u003c\/b\u003e The \u003ca href=\"\/products\/atlas-bipod-bt1517-rail-mounting-fastener-set\"\u003eBT1517 fastener set\u003c\/a\u003e covers both the BT15 and BT17\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1913 Picatinny rail, flush cup, flat back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLength\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e4 inches (102 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHole Spacing\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 to 3.5 inches (56–89 mm) centre-to-centre approx.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFixings\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT1517 rail mounting fastener set (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT17 \/ BT17 \/ 810040220241\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT17 4 inch (102 mm) Picatinny rail\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas rail is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat hole spacing does the Atlas BT17 rail suit?\u003c\/b\u003e\u003cbr\u003eThe BT17 accommodates stock hole patterns with a centre-to-centre spacing of approximately 2.2 to 3.5 inches (56–89 mm).\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the difference between the Atlas BT17 and the BT15?\u003c\/b\u003e\u003cbr\u003eThe BT17 is 4 inches (102 mm) long with a flat back for flat-bottomed forends, while the BT15 is 3.35 inches (85 mm) long with a radiused back for rounded forends and a tighter hole spacing.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich bipods will mount to the Atlas BT17 rail?\u003c\/b\u003e\u003cbr\u003eAny bipod or monopod with a MIL-STD-1913 Picatinny interface will mount to it, including two-screw and ADM lever Atlas bipods and the Accu-Shot Precision Rail Monopods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre the mounting screws included with the Atlas BT17?\u003c\/b\u003e\u003cbr\u003eThe fixings are sold separately as the BT1517 rail mounting fastener set, which contains two 10-32 T-nuts and two 10-32 × ¾ inch (19 mm) button head screws and fits both the BT15 and BT17.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT17 4 inch (102 mm) flush cup Picatinny rail.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904438646,"sku":"BT17","price":34.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt17-4-inch-1913-picatinny-rail-1.jpg?v=1785269404"},{"product_id":"atlas-bipod-bt15-3-35-inch-picatinny-rail","title":"Atlas Bipod BT15 3.35 Inch Picatinny Rail","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT15 3.35 Inch Picatinny Rail\u003c\/b\u003e, part number BT15 from B\u0026amp;T Industries, is a flush cup MIL-STD-1913 rail with a radiused back, 3.35 inches (85 mm) long. It accommodates stock hole patterns with a centre-to-centre spacing of 1.76 to 2.78 inches (45–71 mm), and is the classic way to add bipod and monopod rail mounting to a conventional stock.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe radiused back is what suits the BT15 to a rounded forend; the \u003ca href=\"\/products\/atlas-bipod-bt17-4-inch-1913-picatinny-rail\"\u003eAtlas BT17 4 inch flat-back Picatinny rail\u003c\/a\u003e is the flat-bottomed equivalent and covers a wider hole spacing. For shorter stocks, the \u003ca href=\"\/products\/atlas-bipod-bt34-2-05-inch-1913-rail\"\u003eAtlas BT34 2.05 inch radius-back rail\u003c\/a\u003e and the slotted \u003ca href=\"\/products\/atlas-bipod-bt49-2-05-inch-adjustable-rail\"\u003eAtlas BT49 2.05 inch adjustable rail\u003c\/a\u003e cover tighter spacings. Fixings are the \u003ca href=\"\/products\/atlas-bipod-bt1517-rail-mounting-fastener-set\"\u003eBT1517 rail mounting fastener set\u003c\/a\u003e. More options in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConventional wooden and synthetic stalking stocks with a rounded forend\u003c\/li\u003e\n\u003cli\u003eAdding Picatinny mounting for an Atlas bipod to a rifle that has none\u003c\/li\u003e\n\u003cli\u003eTarget and F-Class rifles being converted to rail-mounted support\u003c\/li\u003e\n\u003cli\u003eStocks with existing holes spaced 1.76 to 2.78 inches (45–71 mm) apart\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e MIL-STD-1913 Picatinny rail with flush cups, radius back\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength:\u003c\/b\u003e 3.35 inches (85 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHole spacing:\u003c\/b\u003e 1.76 to 2.78 inches (45–71 mm) centre-to-centre, approximate\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBack profile:\u003c\/b\u003e Radiused, for rounded forends\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFixings:\u003c\/b\u003e The \u003ca href=\"\/products\/atlas-bipod-bt1517-rail-mounting-fastener-set\"\u003eBT1517 fastener set\u003c\/a\u003e covers both the BT15 and BT17\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1913 Picatinny rail, flush cup, radius back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLength\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.35 inches (85 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHole Spacing\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.76 to 2.78 inches (45–71 mm) centre-to-centre approx.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFixings\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT1517 rail mounting fastener set (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT15 \/ BT15 \/ 810040220234\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT15 3.35 inch (85 mm) Picatinny rail\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas rail is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat hole spacing does the Atlas BT15 rail suit?\u003c\/b\u003e\u003cbr\u003eThe BT15 accommodates stock hole patterns with a centre-to-centre spacing of approximately 1.76 to 2.78 inches (45–71 mm).\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the difference between the Atlas BT15 and the BT17?\u003c\/b\u003e\u003cbr\u003eThe BT15 is 3.35 inches (85 mm) long with a radiused back for rounded forends, while the BT17 is 4 inches (102 mm) long with a flat back for flat-bottomed forends and covers a wider hole spacing of 2.2 to 3.5 inches (56–89 mm).\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich bipods will mount to the Atlas BT15 rail?\u003c\/b\u003e\u003cbr\u003eAny bipod or monopod with a MIL-STD-1913 Picatinny interface will mount to it, including two-screw and ADM lever Atlas bipods and the Accu-Shot Precision Rail Monopods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre the mounting screws included with the Atlas BT15?\u003c\/b\u003e\u003cbr\u003eThe fixings are sold separately as the BT1517 rail mounting fastener set, which contains two 10-32 T-nuts and two 10-32 × ¾ inch (19 mm) button head screws and covers both the BT15 and BT17.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT15 3.35 inch (85 mm) flush cup Picatinny rail.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904471414,"sku":"BT15","price":34.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt15-3-35-inch-picatinny-rail-1.jpg?v=1785269727"},{"product_id":"atlas-bipod-bt72-lw17-super-cal-with-adm-170-s-lever-qd-mount","title":"Atlas Bipod BT72-LW17 Super CAL with ADM-170-S Lever QD Mount","description":"\u003cp\u003eThe \u003cb\u003eAtlas Bipod BT72-LW17 Super CAL\u003c\/b\u003e, part number BT72-LW17 from B\u0026amp;T Industries, is the heavy-duty Super CAL (Cant And Loc) Atlas bipod supplied with the American Defense ADM-170-S quick-detach lever mount fitted. It clamps to any MIL-STD-1913 Picatinny rail in seconds, and like every Super CAL it cants and locks but does not pan.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis is the quick-detach Super CAL. The \u003ca href=\"\/products\/atlas-bipod-bt72-super-cal-with-2-screw-mount\"\u003eBT72 Super CAL with the two-screw Picatinny clamp\u003c\/a\u003e bolts down permanently, and the \u003ca href=\"\/products\/atlas-bipod-bt72-nc-super-cal-no-clamp\"\u003eBT72-NC Super CAL supplied with no clamp\u003c\/a\u003e waits for a 17S-size mount of your own. For a lighter bipod that pans freely, see the \u003ca href=\"\/products\/atlas-bipod-bt65-lw17-cal-with-adm-170-s-lever-qd-mount\"\u003eAtlas BT65-LW17 CAL bipod\u003c\/a\u003e. The lever is stocked separately as the \u003ca href=\"\/products\/american-defense-adm-170-s-picatinny-lever-mount-atlas-bipod\"\u003eAmerican Defense ADM-170-S Picatinny lever mount\u003c\/a\u003e. See the heavyweights side by side in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy target and F-Class rifles that are transported between meetings\u003c\/li\u003e\n\u003cli\u003eBenchrest and long-range club shooting from a fixed firing point\u003c\/li\u003e\n\u003cli\u003eLarge-calibre and heavy-barrelled builds\u003c\/li\u003e\n\u003cli\u003eShooters running one heavy bipod across more than one rifle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Atlas Super CAL (Cant And Loc) — the heavy-duty, non-panning Atlas build\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e American Defense ADM-170-S quick-detach lever for MIL-STD-1913 Picatinny rail, supplied fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLever tension:\u003c\/b\u003e Adjustable clamping nut, so lever tension can be tuned to your own rail\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMovement:\u003c\/b\u003e Cants and locks; the Super CAL does not pan\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e Super CAL and 5-H pattern — \u003ca href=\"\/products\/atlas-bipod-bt55-5-h-super-cal-standard-rubber-feet\"\u003eBT55 standard rubber feet\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt66-5-h-super-cal-bas-ski-feet\"\u003eBT66 BAS ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt75-raider-cleat-feet-for-5-h-super-cal\"\u003eBT75 Raider cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarry:\u003c\/b\u003e Fits the \u003ca href=\"\/products\/atlas-bipod-bt30-s5-large-bipod-pouch\"\u003eBT30-S5 large Atlas bipod pouch\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSeries\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas Super CAL (Cant And Loc, non-panning)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAmerican Defense ADM-170-S lever quick-detach, MIL-STD-1913 Picatinny, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount Pattern\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.100 in (27.9 mm) two-hole pattern, 10\/32 threads — 17S-size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMovement\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eLockable cant; no pan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatible Feet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSuper CAL \/ 5-H pattern: BT55 rubber, BT66 BAS ski, BT75 Raider cleat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePouch\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-S5 large Atlas bipod pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT72-LW17 \/ BT72-LW17 \/ 810040220708\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1× Atlas BT72 Super CAL bipod\u003c\/li\u003e\n\u003cli\u003e1× American Defense ADM-170-S lever quick-detach mount, fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bipod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich mount does the Atlas BT72-LW17 need?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT72-LW17 needs no separate mount, because the American Defense ADM-170-S quick-detach lever is supplied already fitted; the rifle only needs a MIL-STD-1913 Picatinny rail section for the lever to clamp onto.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Atlas BT72-LW17 Super CAL pan?\u003c\/b\u003e\u003cbr\u003eNo — the Super CAL cants and locks but does not pan, which is what makes it the most rigid bipod in the CAL line.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich feet fit the Atlas BT72-LW17 Super CAL?\u003c\/b\u003e\u003cbr\u003eThe Super CAL takes the 5-H and Super CAL foot pattern — BT55 standard rubber feet, BT66 BAS ski feet and BT75 Raider cleat feet — and it does not take the V8, PSR and CAL feet such as the BT32, BT23 and BT74.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich pouch fits the Atlas BT72-LW17 Super CAL?\u003c\/b\u003e\u003cbr\u003eThe BT30-S5 large Atlas bipod pouch is the correct one, because it is sized for the Super CAL and 5-H bipods rather than the smaller V8, PSR and CAL models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the Atlas BT72-LW17 return to the same position after removal?\u003c\/b\u003e\u003cbr\u003eThe ADM-170-S lever mount is designed for repeatable refitting to the same rail slot, and the clamping nut can be adjusted so the lever tension suits your own rail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT72 Super CAL bipod with the American Defense ADM-170-S lever quick-detach mount already fitted.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904536950,"sku":"BT72-LW17","price":439.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt72-lw17-super-cal-with-adm-170-s-lever-qd-mount-1.jpg?v=1785271688"},{"product_id":"atlas-bipod-bt72-nc-super-cal-no-clamp","title":"Atlas Bipod BT72-NC Super CAL No Clamp","description":"\u003cp\u003eThe \u003cb\u003eAtlas Bipod BT72-NC Super CAL No Clamp\u003c\/b\u003e, part number BT72-NC from B\u0026amp;T Industries, is the heavy-duty Super CAL (Cant And Loc) Atlas bipod supplied with no clamp fitted. Its 1.100 inch (27.9 mm) two-hole pattern with 10\/32 threads accepts the BT19 Accuracy International spigot, the BT70 M-LOK adaptor or any 17S-size lever mount such as the ADM-170-S. Like every Super CAL it cants and locks but does not pan.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\"NC\" means No Clamp. The \u003ca href=\"\/products\/atlas-bipod-bt72-super-cal-with-2-screw-mount\"\u003eBT72 Super CAL with the two-screw Picatinny clamp\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt72-lw17-super-cal-with-adm-170-s-lever-qd-mount\"\u003eBT72-LW17 Super CAL with the ADM-170-S lever\u003c\/a\u003e both arrive with a mount fitted. The other heavyweight Atlas is the \u003ca href=\"\/products\/atlas-bipod-bt35-nc-5-h-no-clamp\"\u003eAtlas BT35-NC 5-H bipod\u003c\/a\u003e, and the lighter panning alternative is the \u003ca href=\"\/products\/atlas-bipod-bt65-nc-cal-no-clamp\"\u003eAtlas BT65-NC CAL bipod\u003c\/a\u003e. Compare them in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e and the \u003ca href=\"\/collections\/f-class-benchrest-bipods\"\u003eF-Class and benchrest bipod selection\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy target, F-Class and benchrest rifles\u003c\/li\u003e\n\u003cli\u003eAccuracy International rifles running the factory spigot forend\u003c\/li\u003e\n\u003cli\u003eM-LOK handguards, bolting straight into a rail slot with the BT70 adaptor\u003c\/li\u003e\n\u003cli\u003eLong-range shooters fitting an ARCA or lever clamp of their own choosing\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Atlas Super CAL (Cant And Loc) — the heavy-duty, non-panning Atlas build\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e None fitted — 1.100 in (27.9 mm) two-hole pattern, 10\/32 threads, 17S-size\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpigot option:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt19-accuracy-international-spigot-aais\"\u003eBT19 Accuracy International spigot (AAIS)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eM-LOK option:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt70-m-lok-adaptor\"\u003eBT70 M-LOK adaptor\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLever option:\u003c\/b\u003e \u003ca href=\"\/products\/american-defense-adm-170-s-picatinny-lever-mount-atlas-bipod\"\u003eAmerican Defense ADM-170-S Picatinny lever mount\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e Super CAL and 5-H pattern — \u003ca href=\"\/products\/atlas-bipod-bt55-5-h-super-cal-standard-rubber-feet\"\u003eBT55 standard rubber feet\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt66-5-h-super-cal-bas-ski-feet\"\u003eBT66 BAS ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt75-raider-cleat-feet-for-5-h-super-cal\"\u003eBT75 Raider cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSeries\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas Super CAL (Cant And Loc, non-panning)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNone fitted — accepts BT19 spigot, BT70 M-LOK adaptor or any 17S-size clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount Pattern\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.100 in (27.9 mm) two-hole pattern, 10\/32 threads — 17S-size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMovement\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eLockable cant; no pan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatible Feet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSuper CAL \/ 5-H pattern: BT55 rubber, BT66 BAS ski, BT75 Raider cleat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePouch\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-S5 large Atlas bipod pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT72-NC \/ BT72-NC \/ 810040220692\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1× Atlas BT72-NC Super CAL bipod, no clamp fitted\u003c\/li\u003e\n\u003cli\u003eMount installation screws (10-32 flat socket)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bipod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich mount does the Atlas BT72-NC need?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT72-NC is supplied with no clamp, so it needs a mount bought separately: the BT19 Accuracy International spigot, the BT70 M-LOK adaptor, or any 17S-size lever clamp such as the American Defense ADM-170-S.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Atlas BT72-NC clamp directly to a Picatinny rail?\u003c\/b\u003e\u003cbr\u003eNo — the BT72-NC has no clamp of its own and cannot attach to a Picatinny rail until a 17S-size mount is bolted to it; if you want it ready to use, choose the \u003ca href=\"\/products\/atlas-bipod-bt72-super-cal-with-2-screw-mount\"\u003eBT72 with the two-screw clamp\u003c\/a\u003e or the \u003ca href=\"\/products\/atlas-bipod-bt72-lw17-super-cal-with-adm-170-s-lever-qd-mount\"\u003eBT72-LW17 with the ADM-170-S lever\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Atlas BT72-NC Super CAL pan?\u003c\/b\u003e\u003cbr\u003eNo — the Super CAL cants and locks but does not pan, and that fixed axis is what gives it its rigidity under a heavy rifle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich feet fit the Atlas BT72-NC Super CAL?\u003c\/b\u003e\u003cbr\u003eThe Super CAL takes the 5-H and Super CAL foot pattern — BT55 standard rubber feet, BT66 BAS ski feet and BT75 Raider cleat feet — and it does not take the V8, PSR and CAL feet such as the BT32, BT23 and BT74.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eCan the Atlas BT72-NC be made ARCA compatible?\u003c\/b\u003e\u003cbr\u003eNo Atlas bipod in this range is natively ARCA-Swiss, but the BT72-NC is the easiest Super CAL to convert because it is supplied clamp-free — fit an ARCA clamp from our \u003ca href=\"\/collections\/arca-bipods\"\u003eARCA bipods and clamps\u003c\/a\u003e collection, such as the \u003ca href=\"\/products\/area-419-arcalock-clamp-atlas-bipod\"\u003eArea 419 ARCALOCK clamp for Atlas bipods\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT72-NC Super CAL bipod with no clamp fitted, plus the 10-32 flat socket mount installation screws.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904569718,"sku":"BT72-NC","price":374.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt72-nc-super-cal-no-clamp-1.jpg?v=1785269510"},{"product_id":"atlas-bipod-bt72-super-cal-with-2-screw-mount","title":"Atlas Bipod BT72 Super CAL with 2 Screw Mount","description":"\u003cp\u003eThe \u003cb\u003eAtlas Bipod BT72 Super CAL\u003c\/b\u003e, part number BT72 from B\u0026amp;T Industries, is the heavy-duty Super CAL (Cant And Loc) Atlas bipod supplied with the low-profile two-screw MIL-STD-1913 Picatinny clamp already fitted. The Super CAL cants and locks but does not pan, which is what gives it its rigidity under a heavy rifle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe Super CAL is the reinforced CAL. Within the BT72 family only the mount changes: the \u003ca href=\"\/products\/atlas-bipod-bt72-lw17-super-cal-with-adm-170-s-lever-qd-mount\"\u003eBT72-LW17 Super CAL with the ADM-170-S quick-detach lever\u003c\/a\u003e comes off in seconds, and the \u003ca href=\"\/products\/atlas-bipod-bt72-nc-super-cal-no-clamp\"\u003eBT72-NC Super CAL supplied with no clamp\u003c\/a\u003e takes a 17S-size mount of your own. If you want free panning in a lighter bipod, the \u003ca href=\"\/products\/atlas-bipod-bt65-cal-with-two-screw-picatinny-mount\"\u003eAtlas BT65 CAL bipod\u003c\/a\u003e is the standard CAL. The other heavyweight in the range is the \u003ca href=\"\/products\/atlas-bipod-bt35-nc-5-h-no-clamp\"\u003eAtlas BT35-NC 5-H bipod\u003c\/a\u003e. Compare them in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy target and F-Class rifles where rigidity matters more than tracking\u003c\/li\u003e\n\u003cli\u003eBenchrest and long-range club shooting from a fixed firing point\u003c\/li\u003e\n\u003cli\u003eLarge-calibre and heavy-barrelled builds\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting where the rifle is set and locked\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Atlas Super CAL (Cant And Loc) — the heavy-duty, non-panning Atlas build\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e Low-profile two-screw clamp for MIL-STD-1913 Picatinny rail, supplied fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMovement:\u003c\/b\u003e Cants and locks; the Super CAL does not pan\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e Super CAL and 5-H pattern — \u003ca href=\"\/products\/atlas-bipod-bt55-5-h-super-cal-standard-rubber-feet\"\u003eBT55 standard rubber feet\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt66-5-h-super-cal-bas-ski-feet\"\u003eBT66 BAS ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt75-raider-cleat-feet-for-5-h-super-cal\"\u003eBT75 Raider cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCarry:\u003c\/b\u003e Fits the \u003ca href=\"\/products\/atlas-bipod-bt30-s5-large-bipod-pouch\"\u003eBT30-S5 large Atlas bipod pouch\u003c\/a\u003e, sized for Super CAL and 5-H\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRear support:\u003c\/b\u003e Pairs with \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot rear monopods\u003c\/a\u003e such as the \u003ca href=\"\/products\/accu-shot-bt13-qk-monopod-prm-mount\"\u003eBT13-QK mid-range Precision Rail Monopod\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSeries\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas Super CAL (Cant And Loc, non-panning)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-screw MIL-STD-1913 Picatinny rail clamp, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount Pattern\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.100 in (27.9 mm) two-hole pattern, 10\/32 threads — 17S-size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMovement\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eLockable cant; no pan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatible Feet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSuper CAL \/ 5-H pattern: BT55 rubber, BT66 BAS ski, BT75 Raider cleat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePouch\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-S5 large Atlas bipod pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT72 \/ BT72 \/ 810040220685\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT72 Super CAL bipod with the two-screw Picatinny mount fitted\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bipod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich mount does the Atlas BT72 Super CAL need?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT72 needs no separate mount, because the two-screw MIL-STD-1913 Picatinny clamp is supplied already fitted; the rifle simply needs a Picatinny rail section for it to bolt onto.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Atlas BT72 Super CAL pan?\u003c\/b\u003e\u003cbr\u003eNo — the Super CAL cants and locks but does not pan, and that fixed axis is what makes it the most rigid bipod in the CAL line.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich feet fit the Atlas BT72 Super CAL?\u003c\/b\u003e\u003cbr\u003eThe Super CAL takes the 5-H and Super CAL foot pattern — BT55 standard rubber feet, BT66 BAS ski feet and BT75 Raider cleat feet — and it does not take the V8, PSR and CAL feet such as the BT32, BT23 and BT74.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich pouch fits the Atlas BT72 Super CAL?\u003c\/b\u003e\u003cbr\u003eThe BT30-S5 large Atlas bipod pouch is the correct one, because it is sized for the Super CAL and 5-H bipods rather than the smaller V8, PSR and CAL models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the Atlas BT72 Super CAL ARCA compatible?\u003c\/b\u003e\u003cbr\u003eNo — the BT72 is supplied with a two-screw MIL-STD-1913 Picatinny clamp and no Atlas bipod in this range is natively ARCA-Swiss; ARCA compatibility is added with a separate clamp from our \u003ca href=\"\/collections\/arca-bipods\"\u003eARCA bipods and clamps\u003c\/a\u003e collection.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT72 Super CAL bipod with the two-screw Picatinny mount already fitted.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904635254,"sku":"BT72","price":374.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt72-super-cal-with-2-screw-mount-1.jpg?v=1785271706"},{"product_id":"atlas-bipod-bt66-5-h-super-cal-bas-ski-feet","title":"Atlas Bipod BT66 5-H \u0026 Super CAL BAS Ski Feet","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT66 5-H and Super CAL BAS Ski Feet\u003c\/b\u003e, part number BT66 from B\u0026amp;T Industries, are machined ski feet developed for the 5-H and Super CAL series Atlas bipods. The ski profile spreads the load of a heavy rifle so the bipod tracks smoothly on soft ground instead of digging in. Sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eOn the same 5-H and Super CAL bipods, the \u003ca href=\"\/products\/atlas-bipod-bt75-raider-cleat-feet-for-5-h-super-cal\"\u003eBT75 Raider cleat feet\u003c\/a\u003e grip hard surfaces and the \u003ca href=\"\/products\/atlas-bipod-bt55-5-h-super-cal-standard-rubber-feet\"\u003eBT55 standard rubber feet\u003c\/a\u003e are the factory item. If your bipod is a V8, PSR or CAL model, the smaller \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 quick-change ski feet\u003c\/a\u003e are the correct part instead. Browse the rest in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy F-Class and benchrest rifles that must track straight back under recoil\u003c\/li\u003e\n\u003cli\u003eLong-range shooting on soft ground, peat and ploughed field\u003c\/li\u003e\n\u003cli\u003eDeer stalking with a heavy-barrelled rifle on wet or boggy ground\u003c\/li\u003e\n\u003cli\u003eSand, snow and loose surfaces where a narrow foot sinks\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e BAS ski feet for 5-H and Super CAL, sold as a pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt35-lw17-5-h-with-adm-4103la74-5-h-lever-qd-mount\"\u003eAtlas 5-H\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt72-nc-super-cal-no-clamp\"\u003eAtlas Super CAL\u003c\/a\u003e bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBenefit:\u003c\/b\u003e Spreads the load of a heavy rifle for smooth tracking on soft ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNot for:\u003c\/b\u003e V8, PSR and CAL bipods, which take the BT23 ski feet instead\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBAS ski feet, pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5-H and Super CAL Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDoes Not Fit\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eV8, PSR and CAL Atlas bipods (use BT23)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT66 \/ BT66 \/ 810040220630\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2× Atlas BT66 BAS ski feet (one pair)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThese Atlas feet are dispatched tracked from our UK warehouse — no import duties and no customs delays — and are backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods do the BT66 BAS ski feet fit?\u003c\/b\u003e\u003cbr\u003eThe BT66 BAS ski feet fit the 5-H and Super CAL series Atlas bipods, which includes the BT35 and BT72 in all of their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT66 fit a V8, PSR or CAL Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNo — those bipods take the smaller BT23 quick-change ski feet, and the BT66 and BT23 are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow many feet are in a set?\u003c\/b\u003e\u003cbr\u003eThe BT66 is sold as a pair, which is one complete set for a single bipod.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhy choose ski feet on a heavy rifle?\u003c\/b\u003e\u003cbr\u003eSki feet spread the load across a wider contact area, which stops a heavy rifle digging into soft ground and helps the bipod track straight back under recoil rather than skewing.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains two Atlas BT66 BAS ski feet, which is one pair.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904668022,"sku":"BT66","price":99.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt66-5-h-super-cal-bas-ski-feet-1.jpg?v=1785271775"},{"product_id":"atlas-bipod-bt23-quick-change-ski-feet","title":"Atlas Bipod BT23 Quick Change Ski Feet","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT23 Quick Change Ski Feet\u003c\/b\u003e, part number BT23 from B\u0026amp;T Industries, replace the standard feet on any V8, PSR or CAL model Atlas bipod. The ski profile spreads the load so the bipod tracks smoothly on soft or loose ground instead of digging in, and they fit in seconds with a press of the stainless steel plunger. Sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSki feet are the soft-ground answer. On hard surfaces the \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider stainless steel cleat feet\u003c\/a\u003e grip better, and the \u003ca href=\"\/products\/atlas-bipod-bt32-standard-rubber-feet\"\u003eBT32 standard rubber feet\u003c\/a\u003e are the factory item that came on the bipod. For a 5-H or Super CAL bipod, the equivalent ski foot is the \u003ca href=\"\/products\/atlas-bipod-bt66-5-h-super-cal-bas-ski-feet\"\u003eBT66 BAS ski feet\u003c\/a\u003e. See the full set of options in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeer stalking on soft ground, peat, heather and ploughed field\u003c\/li\u003e\n\u003cli\u003eF-Class and benchrest shooting where the bipod must track straight back\u003c\/li\u003e\n\u003cli\u003eNight fox and vermin control over stubble and pasture\u003c\/li\u003e\n\u003cli\u003eSand, snow and loose surfaces where a narrow foot sinks\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Quick-change ski feet, sold as a pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e V8, PSR and CAL model Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e Quick-change — installed in seconds with the press of a stainless steel plunger\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBenefit:\u003c\/b\u003e Spreads the load for smooth tracking on soft or loose ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNot for:\u003c\/b\u003e 5-H and Super CAL bipods, which take the BT66 BAS ski feet instead\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSki feet, quick change, pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eV8, PSR and CAL model Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFitting\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eStainless steel plunger, tool-free quick change\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDoes Not Fit\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5-H and Super CAL Atlas bipods (use BT66)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT23 \/ BT23 \/ 810040220449\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2× Atlas BT23 quick-change ski feet (one pair)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThese Atlas feet are dispatched tracked from our UK warehouse — no import duties and no customs delays — and are backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods do the BT23 ski feet fit?\u003c\/b\u003e\u003cbr\u003eThe BT23 quick-change ski feet fit the V8, PSR and CAL model Atlas bipods, which includes the BT10, BT46, BT47, BT65 and BT69 in all of their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDo I need tools to change Atlas feet?\u003c\/b\u003e\u003cbr\u003eNo — the BT23 is a quick-change foot and is installed in seconds by pressing the stainless steel plunger, so no tools are required.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT23 fit a 5-H or Super CAL Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNo — the 5-H and Super CAL bipods take the larger BT66 BAS ski feet, and the two parts are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhen should I choose ski feet over cleat feet?\u003c\/b\u003e\u003cbr\u003eSki feet are the better choice on soft or loose ground such as peat, heather, sand and snow, because they spread the load and let the bipod track smoothly, while cleat feet suit hard surfaces where grip matters more.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains two Atlas BT23 quick-change ski feet, which is one pair.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904766326,"sku":"BT23","price":59.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt23-quick-change-ski-feet-1.jpg?v=1785271588"},{"product_id":"atlas-bipod-bt70-m-lok-adaptor","title":"Atlas Bipod BT70 M-LOK Adaptor","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT70 M-LOK Adaptor\u003c\/b\u003e, part number BT70 from B\u0026amp;T Industries, is the interface between NC (No Clamp) Atlas bipods and M-LOK handguards. Bolt it straight into an M-LOK slot and a BT10-NC, BT46-NC, BT47-NC, BT35-NC, BT65-NC, BT69-NC or BT72-NC mounts directly, with no Picatinny rail needed.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT70 is the low, light route: no rail, bipod straight onto the handguard. If your bipod has a two-screw or ADM lever Picatinny clamp instead, you need a rail — the \u003ca href=\"\/products\/atlas-bipod-bt73-m-lok-picatinny-rail\"\u003eAtlas BT73 M-LOK Picatinny rail\u003c\/a\u003e, or the \u003ca href=\"\/products\/atlas-bipod-bt80-m-lok-flush-cup-rail\"\u003eAtlas BT80 M-LOK flush cup rail\u003c\/a\u003e if you also want QD sling sockets. The other NC interfaces are the \u003ca href=\"\/products\/atlas-bipod-bt19-accuracy-international-spigot-aais\"\u003eBT19 Accuracy International spigot\u003c\/a\u003e and any 17S-size lever. NC bipods are listed in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePractical and service rifle builds on M-LOK handguards\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style rifles where a low bipod mounting height matters\u003c\/li\u003e\n\u003cli\u003eNight fox and vermin rifles built on M-LOK forends\u003c\/li\u003e\n\u003cli\u003eAnyone who bought an NC Atlas bipod and needs the mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e M-LOK adaptor for NC (No Clamp) Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e All NC (No Clamp) Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting:\u003c\/b\u003e Bolts directly into an M-LOK slot — no Picatinny rail required\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible bipods:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt10-nc-v8-no-clamp\"\u003eBT10-NC V8\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt46-nc-psr-no-clamp\"\u003eBT46-NC PSR\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt47-nc-psr-tall-no-clamp\"\u003eBT47-NC PSR Tall\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt65-nc-cal-no-clamp\"\u003eBT65-NC CAL\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt69-nc-cal-tall-no-clamp\"\u003eBT69-NC CAL Tall\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt72-nc-super-cal-no-clamp\"\u003eBT72-NC Super CAL\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt35-nc-5-h-no-clamp\"\u003eBT35-NC 5-H\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM-LOK adaptor for NC Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAll NC (No Clamp) Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMounting\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eDirect into an M-LOK slot, no Picatinny rail required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT70 \/ BT70 \/ 810040220647\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT70 M-LOK adaptor with fixings\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas adaptor is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods fit the BT70 M-LOK adaptor?\u003c\/b\u003e\u003cbr\u003eThe BT70 fits every NC (No Clamp) Atlas bipod, which is the BT10-NC, BT46-NC, BT47-NC, BT35-NC, BT65-NC, BT69-NC and BT72-NC.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT70 work with a two-screw or ADM lever Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNo — those bipods already carry a Picatinny clamp, so they need a rail such as the BT73 M-LOK Picatinny rail rather than the BT70 adaptor.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the BT70 need a Picatinny rail on the handguard?\u003c\/b\u003e\u003cbr\u003eNo — the BT70 bolts directly into an M-LOK slot, which is what makes it a lower and lighter mounting than adding a rail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the Atlas BT70 KeyMod compatible?\u003c\/b\u003e\u003cbr\u003eNo — the BT70 is an M-LOK fitting only and will not mount to a KeyMod handguard.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT70 M-LOK adaptor with its fixings.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904831862,"sku":"BT70","price":34.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt70-m-lok-adaptor-1.jpg?v=1785269776"},{"product_id":"atlas-bipod-bt22-3-inch-leg-extensions","title":"Atlas Bipod BT22 3 Inch Leg Extensions","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT22 3 Inch Leg Extensions\u003c\/b\u003e, part number BT22 from B\u0026amp;T Industries, add 3 inches (76 mm) of height to each leg of any V8, PSR or CAL model Atlas bipod. They install in seconds with the press of the stainless steel plunger, using the same quick-change interface as the Atlas feet. Sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT22 is the fixed-length extension: 3 inches (76 mm), on or off. If you would rather set the added height rather than accept a fixed step, the \u003ca href=\"\/products\/atlas-bipod-bt85-adjustable-leg-extensions\"\u003eBT85 adjustable leg extensions\u003c\/a\u003e are the alternative. If you want the height built into the bipod itself, the Tall models such as the \u003ca href=\"\/products\/atlas-bipod-bt47-nc-psr-tall-no-clamp\"\u003eAtlas BT47-NC PSR Tall bipod\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt69-cal-tall-with-two-screw-picatinny-mount\"\u003eAtlas BT69 CAL Tall bipod\u003c\/a\u003e have longer legs as standard. More in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHill and woodland stalking where heather and bracken sit above the muzzle\u003c\/li\u003e\n\u003cli\u003eShooting over cover, kit or a low bank\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style stages that need more height for one position\u003c\/li\u003e\n\u003cli\u003eGetting extra height without buying a second, taller bipod\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Fixed leg extensions, sold as a pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdded height:\u003c\/b\u003e 3 inches (76 mm) per leg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e V8, PSR and CAL model Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e Quick-change — installed in seconds with the press of the stainless steel plunger\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e Used with the Atlas quick-change feet, including the \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eLeg extensions, fixed length, pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdded Height\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3 inches (76 mm) per leg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eV8, PSR and CAL model Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFitting\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eStainless steel plunger, tool-free quick change\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT22 \/ BT22 \/ 810040220432\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2× Atlas BT22 3 inch (76 mm) leg extensions (one pair)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThese Atlas leg extensions are dispatched tracked from our UK warehouse — no import duties and no customs delays — and are backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow much height do the Atlas BT22 leg extensions add?\u003c\/b\u003e\u003cbr\u003eThe BT22 extensions add 3 inches (76 mm) to each leg, which is a fixed length rather than an adjustable one.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods do the BT22 leg extensions fit?\u003c\/b\u003e\u003cbr\u003eThe BT22 fits the V8, PSR and CAL model Atlas bipods, which includes the BT10, BT46, BT47, BT65 and BT69 in all of their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDo I need tools to fit the BT22 leg extensions?\u003c\/b\u003e\u003cbr\u003eNo — the BT22 uses the same quick-change interface as the Atlas feet and is installed in seconds by pressing the stainless steel plunger.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eCan I still use ski or cleat feet with the leg extensions fitted?\u003c\/b\u003e\u003cbr\u003eYes — the Atlas quick-change feet, including the BT23 ski feet and BT74 Raider cleat feet, fit on the end of the extensions.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains two Atlas BT22 3 inch (76 mm) leg extensions, which is one pair.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904930166,"sku":"BT22","price":59.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt22-3-inch-leg-extensions-1.jpg?v=1785271795"},{"product_id":"atlas-bipod-bt28-afar-accuracy-international-freeland-anschutz-rail-kit","title":"Atlas Bipod BT28 AFAR Accuracy International, Freeland, Anschutz Rail Kit","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT28 AFAR Rail Kit\u003c\/b\u003e, part number BT28 from B\u0026amp;T Industries, mounts into Accuracy International, Freeland and Anschutz accessory rails to provide a low-profile MIL-STD-1913 Picatinny interface. It is what lets Atlas bipods and Accu-Shot PRM monopods run on target and competition stocks that use those accessory rail systems.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT28 is for the accessory rail found on target stocks, not for the AI spigot forend — that is the \u003ca href=\"\/products\/atlas-bipod-bt19-accuracy-international-spigot-aais\"\u003eAtlas BT19 Accuracy International spigot\u003c\/a\u003e. Replacement nuts for this kit are the \u003ca href=\"\/products\/atlas-bipod-bt28-n-afar-rail-nuts\"\u003eAtlas BT28-N AFAR rail nuts\u003c\/a\u003e. For a conventional stock with drilled holes, the \u003ca href=\"\/products\/atlas-bipod-bt15-3-35-inch-picatinny-rail\"\u003eAtlas BT15 3.35 inch Picatinny rail\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt17-4-inch-1913-picatinny-rail\"\u003eAtlas BT17 4 inch Picatinny rail\u003c\/a\u003e are the usual answer. See the range in our \u003ca href=\"\/collections\/f-class-benchrest-bipods\"\u003eF-Class and benchrest bipod selection\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eF-Class, benchrest and target rifle stocks with accessory rails\u003c\/li\u003e\n\u003cli\u003eAnschutz and Freeland target stocks\u003c\/li\u003e\n\u003cli\u003eAccuracy International rifles using the accessory rail rather than the spigot\u003c\/li\u003e\n\u003cli\u003eAdding bipod or monopod mounting without altering the stock\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e AFAR rail kit — accessory rail to 1913 Picatinny\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e Accuracy International, Freeland and Anschutz accessory rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile:\u003c\/b\u003e Low-profile Picatinny interface\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTakes:\u003c\/b\u003e Atlas bipods and Accu-Shot PRM monopods with a Picatinny mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpares:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt28-n-afar-rail-nuts\"\u003eBT28-N AFAR rail nuts\u003c\/a\u003e, sold as a pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAFAR rail kit, accessory rail to 1913 Picatinny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAccuracy International, Freeland and Anschutz accessory rails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAccepts\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas bipods and Accu-Shot PRM monopods with a Picatinny mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSpare Nuts\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT28-N AFAR rail nuts (pair, sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT28 \/ BT28 \/ 810040220289\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT28 AFAR rail kit with fixings\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas rail kit is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich rails does the Atlas BT28 AFAR kit fit?\u003c\/b\u003e\u003cbr\u003eThe BT28 mounts into Accuracy International, Freeland and Anschutz accessory rails.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the Atlas BT28 provide?\u003c\/b\u003e\u003cbr\u003eThe BT28 provides a low-profile MIL-STD-1913 Picatinny interface, so Atlas bipods and Accu-Shot PRM monopods can be mounted to target and competition stocks that use those accessory rail systems.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the BT28 the same as the BT19 Accuracy International spigot?\u003c\/b\u003e\u003cbr\u003eNo — the BT19 mounts NC Atlas bipods to the AI spigot forend interface, while the BT28 fits the accessory rail used on target and competition stocks, so they are different products for different interfaces.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre replacement nuts available for the BT28?\u003c\/b\u003e\u003cbr\u003eYes — the BT28-N AFAR rail nuts are the replacement mounting nuts for this kit and are sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT28 AFAR rail kit with its fixings.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904962934,"sku":"BT28","price":39.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt28-afar-accuracy-international-freeland-anschutz-rail-kit-1.jpg?v=1785269550"},{"product_id":"atlas-bipod-bt46-lw17-psr-with-adm-170-s-lever-qd-mount","title":"Atlas Bipod BT46-LW17 PSR with ADM-170-S Lever QD Mount","description":"\u003cp\u003eThe \u003cb\u003eAtlas Bipod BT46-LW17 PSR\u003c\/b\u003e, part number BT46-LW17 from B\u0026amp;T Industries, is the standard-height PSR (Precision Sniper Rifle) Atlas bipod supplied with the American Defense ADM-170-S quick-detach lever mount fitted. The PSR is the heavier-duty Atlas build developed from the V8 platform, with independent pan and cant and the same quick-change feet.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eWithin the PSR line, height and mount are the two choices. This is the standard height with the lever fitted; the \u003ca href=\"\/products\/atlas-bipod-bt46-nc-psr-no-clamp\"\u003eBT46-NC PSR supplied with no clamp\u003c\/a\u003e is the same bipod for a mount of your own, and the taller \u003ca href=\"\/products\/atlas-bipod-bt47-lw17-psr-tall-with-adm-170-s-lever-qd-mount\"\u003eBT47-LW17 PSR Tall with the ADM-170-S lever\u003c\/a\u003e adds leg length for shooting over cover. If you want the lighter build, see the \u003ca href=\"\/products\/atlas-bipod-bt10-lw17-v8-with-adm-170-s-lever-qd-mount\"\u003eAtlas BT10-LW17 V8 bipod\u003c\/a\u003e. The full line-up is in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLong-range and PRS-style shooting where the rifle is heavy and the bipod is worked hard\u003c\/li\u003e\n\u003cli\u003eDeer stalking rifles that are cased and uncased often, thanks to the quick-detach lever\u003c\/li\u003e\n\u003cli\u003eTarget and practical rifle competition\u003c\/li\u003e\n\u003cli\u003eNight fox and vermin control from a static, prone position\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSeries:\u003c\/b\u003e Atlas PSR (Precision Sniper Rifle) — the heavier-duty Atlas line developed from the V8\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMount:\u003c\/b\u003e American Defense ADM-170-S quick-detach lever for MIL-STD-1913 Picatinny rail, supplied fitted\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e Independent pan and cant, for tracking and for levelling on uneven ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e Atlas quick-change system — \u003ca href=\"\/products\/atlas-bipod-bt32-standard-rubber-feet\"\u003eBT32 standard rubber feet\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 quick-change ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider stainless steel cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLeg extensions:\u003c\/b\u003e Accepts the \u003ca href=\"\/products\/atlas-bipod-bt22-3-inch-leg-extensions\"\u003eBT22 3 inch (76 mm) leg extensions\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt85-adjustable-leg-extensions\"\u003eBT85 adjustable leg extensions\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRear support:\u003c\/b\u003e Pairs with \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot rear monopods\u003c\/a\u003e such as the \u003ca href=\"\/products\/accu-shot-bt13-qk-monopod-prm-mount\"\u003eBT13-QK mid-range Precision Rail Monopod\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSeries\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas PSR (Precision Sniper Rifle), standard height\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAmerican Defense ADM-170-S lever quick-detach, MIL-STD-1913 Picatinny, supplied fitted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMount Pattern\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-hole 17S-size Atlas pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdjustment\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eIndependent pan and cant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatible Feet\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas quick-change: BT32 rubber, BT23 ski, BT74 Raider cleat (V8 \/ PSR \/ CAL pattern)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLeg Extensions\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT22 fixed 3 inch (76 mm); BT85 adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePouch\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-B, BT30-C or BT30-R standard-height Atlas bipod pouch, or the BT30 tall pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT46-LW17 \/ BT46-LW17 \/ 810040220142\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1× Atlas BT46 PSR bipod\u003c\/li\u003e\n\u003cli\u003e1× American Defense ADM-170-S lever quick-detach mount, fitted\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bipod is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does PSR mean on an Atlas bipod?\u003c\/b\u003e\u003cbr\u003ePSR stands for Precision Sniper Rifle, and the PSR series is the heavier-duty Atlas line developed from the V8 platform.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich mount does the Atlas BT46-LW17 need?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT46-LW17 needs no separate mount, because the American Defense ADM-170-S quick-detach lever is supplied already fitted; the rifle only needs a MIL-STD-1913 Picatinny rail section for the lever to clamp onto.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the difference between the Atlas BT46 and the BT47?\u003c\/b\u003e\u003cbr\u003eThey are the same PSR bipod build and the difference is leg length: the BT47 is the Tall version with longer legs for extra ground clearance, and the BT46 is the standard height.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich feet fit the Atlas BT46-LW17 PSR bipod?\u003c\/b\u003e\u003cbr\u003eIt takes the V8, PSR and CAL pattern Atlas quick-change feet — BT32 standard rubber feet, BT23 quick-change ski feet and BT74 Raider stainless steel cleat feet — each sold as a pair and listed in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the Atlas BT46-LW17 ARCA compatible?\u003c\/b\u003e\u003cbr\u003eNo — the BT46-LW17 uses a Picatinny lever mount and no Atlas bipod in this range is natively ARCA-Swiss; ARCA compatibility is added with a separate clamp such as the \u003ca href=\"\/products\/area-419-arcalock-qd-clamp-atlas-bipod\"\u003eArea 419 ARCALOCK QD clamp for Atlas bipods\u003c\/a\u003e from our \u003ca href=\"\/collections\/arca-bipods\"\u003eARCA bipods and clamps\u003c\/a\u003e collection.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT46 PSR bipod with the American Defense ADM-170-S lever quick-detach mount already fitted.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307905028470,"sku":"BT46-LW17","price":375.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt46-lw17-psr-with-adm-170-s-lever-qd-mount-1.jpg?v=1785277305"},{"product_id":"atlas-bipod-bt30-c-bipod-pouch-coyote-brown","title":"Atlas Bipod BT30-C Bipod Pouch Coyote Brown","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT30-C Bipod Pouch in Coyote Brown\u003c\/b\u003e, part number BT30-C from B\u0026amp;T Industries, is the genuine Atlas carry pouch for V8, standard-height PSR and CAL model bipods. It is cut to the Atlas footprint exactly, so the bipod goes in folded and comes out without a fight.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe same pouch is stocked in three colours: this Coyote Brown version, the \u003ca href=\"\/products\/atlas-bipod-bt30-b-bipod-pouch-black\"\u003eAtlas BT30-B bipod pouch in Black\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt30-r-bipod-pouch-ranger-green\"\u003eAtlas BT30-R bipod pouch in Ranger Green\u003c\/a\u003e. If your bipod is a Tall model, the \u003ca href=\"\/products\/atlas-bipod-bt30-tall-bipod-pouch-coyote-brown\"\u003eBT30 tall Atlas bipod pouch\u003c\/a\u003e covers both standard and tall heights, and for a 5-H or Super CAL the \u003ca href=\"\/products\/atlas-bipod-bt30-s5-large-bipod-pouch\"\u003eBT30-S5 large Atlas bipod pouch\u003c\/a\u003e is the correct size. Browse the rest in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeer stalkers who want a pouch that disappears against dead bracken and stubble\u003c\/li\u003e\n\u003cli\u003eCarrying the bipod on the belt or in a rucksack\u003c\/li\u003e\n\u003cli\u003eTarget and F-Class shooters transporting kit to the firing point\u003c\/li\u003e\n\u003cli\u003eKeeping a quick-detach bipod protected between stages\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Atlas bipod carry pouch\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eColour:\u003c\/b\u003e Coyote Brown\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e V8, standard-height PSR and CAL model Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFit:\u003c\/b\u003e Made to the Atlas footprint by B\u0026amp;T Industries rather than a generic pouch\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBipod pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColour\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eCoyote Brown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eV8, standard-height PSR and CAL Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOther Sizes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30 tall pouch (standard and tall); BT30-S5 large pouch (5-H and Super CAL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-C \/ BT30-C \/ 810040220487\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT30-C bipod pouch in Coyote Brown\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas pouch is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods does the BT30-C pouch fit?\u003c\/b\u003e\u003cbr\u003eThe BT30-C pouch fits the V8, standard-height PSR and CAL model Atlas bipods, which includes the BT10, BT46, BT65 and their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT30-C fit a Tall Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNo — the Tall models such as the BT47 PSR Tall and BT69 CAL Tall need the BT30 tall pouch, which is cut to take both standard and tall height bipods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich pouch do I need for a 5-H or Super CAL bipod?\u003c\/b\u003e\u003cbr\u003eThe BT30-S5 large Atlas bipod pouch is the correct size for the 5-H and Super CAL bipods, because the standard BT30-C is cut for the smaller V8, PSR and CAL models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat colours is this Atlas pouch available in?\u003c\/b\u003e\u003cbr\u003eThe standard-height Atlas pouch is stocked in Coyote Brown as the BT30-C, Black as the BT30-B and Ranger Green as the BT30-R.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT30-C bipod pouch in Coyote Brown.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345959424374,"sku":"BT30-C","price":59.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt30-c-bipod-pouch-coyote-brown-1.jpg?v=1785367847"},{"product_id":"atlas-bipod-bt30-r-bipod-pouch-ranger-green","title":"Atlas Bipod BT30-R Bipod Pouch Ranger Green","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT30-R Bipod Pouch in Ranger Green\u003c\/b\u003e, part number BT30-R from B\u0026amp;T Industries, is the genuine Atlas carry pouch for V8, standard-height PSR and CAL model bipods. It is cut to the Atlas footprint exactly, so the bipod goes in folded and comes out without a fight.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe same pouch is stocked in three colours: this Ranger Green version, the \u003ca href=\"\/products\/atlas-bipod-bt30-b-bipod-pouch-black\"\u003eAtlas BT30-B bipod pouch in Black\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt30-c-bipod-pouch-coyote-brown\"\u003eAtlas BT30-C bipod pouch in Coyote Brown\u003c\/a\u003e. If your bipod is a Tall model, the \u003ca href=\"\/products\/atlas-bipod-bt30-tall-bipod-pouch-coyote-brown\"\u003eBT30 tall Atlas bipod pouch\u003c\/a\u003e covers both standard and tall heights, and for a 5-H or Super CAL the \u003ca href=\"\/products\/atlas-bipod-bt30-s5-large-bipod-pouch\"\u003eBT30-S5 large Atlas bipod pouch\u003c\/a\u003e is the correct size. Browse the rest in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWoodland stalkers who want a pouch that blends into green cover\u003c\/li\u003e\n\u003cli\u003eCarrying the bipod on the belt or in a rucksack\u003c\/li\u003e\n\u003cli\u003eTarget and F-Class shooters transporting kit to the firing point\u003c\/li\u003e\n\u003cli\u003eKeeping a quick-detach bipod protected between stages\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Atlas bipod carry pouch\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eColour:\u003c\/b\u003e Ranger Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e V8, standard-height PSR and CAL model Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFit:\u003c\/b\u003e Made to the Atlas footprint by B\u0026amp;T Industries rather than a generic pouch\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBipod pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColour\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRanger Green\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eV8, standard-height PSR and CAL Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOther Sizes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30 tall pouch (standard and tall); BT30-S5 large pouch (5-H and Super CAL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-R \/ BT30-R \/ 810040220494\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT30-R bipod pouch in Ranger Green\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas pouch is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods does the BT30-R pouch fit?\u003c\/b\u003e\u003cbr\u003eThe BT30-R pouch fits the V8, standard-height PSR and CAL model Atlas bipods, which includes the BT10, BT46, BT65 and their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT30-R fit a Tall Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNo — the Tall models such as the BT47 PSR Tall and BT69 CAL Tall need the BT30 tall pouch, which is cut to take both standard and tall height bipods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich pouch do I need for a 5-H or Super CAL bipod?\u003c\/b\u003e\u003cbr\u003eThe BT30-S5 large Atlas bipod pouch is the correct size for the 5-H and Super CAL bipods, because the standard BT30-R is cut for the smaller V8, PSR and CAL models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat colours is this Atlas pouch available in?\u003c\/b\u003e\u003cbr\u003eThe standard-height Atlas pouch is stocked in Ranger Green as the BT30-R, Black as the BT30-B and Coyote Brown as the BT30-C.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT30-R bipod pouch in Ranger Green.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345959457142,"sku":"BT30-R","price":59.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt30-r-bipod-pouch-ranger-green-1.jpg?v=1785367848"},{"product_id":"accu-shot-bt03-sling-stud-accessory-m1a-ar15-ar10","title":"Accu-Shot BT03 M1-A \/ AR-15 \/ AR-10 Sling Stud Accessory","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT03 Sling Stud Accessory\u003c\/b\u003e, part number BT03 from B\u0026amp;T Industries, adds a sling stud to M1-A, AR-15 and AR-10 pattern stocks. It is what lets a sling-stud-mounted Accu-Shot monopod be fitted to rifles that do not have a stud from the factory.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT03 covers M1-A, AR-15 and AR-10 stocks. On a Magpul PRS stock the equivalent part is the \u003ca href=\"\/products\/accu-shot-bt14-threaded-magpul-prs-sling-studs\"\u003eAccu-Shot BT14 threaded Magpul PRS sling studs\u003c\/a\u003e. If your stock has a Picatinny rail under the butt instead, you do not need a stud at all — a Precision Rail Monopod such as the \u003ca href=\"\/products\/accu-shot-bt12-qk-monopod-prm-mount\"\u003eAccu-Shot BT12-QK PRM monopod\u003c\/a\u003e clamps straight to the rail. The monopods themselves are in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAR-15 and AR-10 pattern rifles used for practical and service rifle\u003c\/li\u003e\n\u003cli\u003eM1-A rifles being fitted with a rear monopod\u003c\/li\u003e\n\u003cli\u003eNight fox and vermin rifles on AR-pattern stocks\u003c\/li\u003e\n\u003cli\u003eAnyone who bought a sling stud monopod and found no stud on the stock\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Sling stud accessory\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e M1-A, AR-15 and AR-10 pattern stocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose:\u003c\/b\u003e Adds a sling stud so a sling-stud Accu-Shot monopod can be mounted\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorks with:\u003c\/b\u003e \u003ca href=\"\/products\/accu-shot-bt01-qk-monopod-sling-stud-mount\"\u003eBT01-QK\u003c\/a\u003e, \u003ca href=\"\/products\/accu-shot-bt04-qk-monopod-sling-stud-mount\"\u003eBT04-QK\u003c\/a\u003e, \u003ca href=\"\/products\/accu-shot-bt05-qk-monopod-sling-stud-mount\"\u003eBT05-QK\u003c\/a\u003e and \u003ca href=\"\/products\/accu-shot-bt06-qk-monopod-sling-stud-mount\"\u003eBT06-QK\u003c\/a\u003e sling stud monopods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSling stud accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM1-A, AR-15 and AR-10 pattern stocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eUsed With\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSling stud mount Accu-Shot monopods (BT01-QK, BT04-QK, BT05-QK, BT06-QK)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT03 \/ BT03 \/ 810040220371\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT03 sling stud accessory\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot accessory is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the Accu-Shot BT03 do?\u003c\/b\u003e\u003cbr\u003eThe BT03 adds a sling stud to M1-A, AR-15 and AR-10 pattern stocks, so that a sling-stud-mounted Accu-Shot monopod can be fitted to a rifle that has no stud from the factory.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich monopods work with the Accu-Shot BT03?\u003c\/b\u003e\u003cbr\u003eThe BT03 supports the sling stud mount Accu-Shot monopods, which are the BT01-QK, BT04-QK, BT05-QK and BT06-QK.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat if my stock is a Magpul PRS?\u003c\/b\u003e\u003cbr\u003eThe Magpul PRS uses the BT14 threaded sling studs rather than the BT03, so order the BT14 for that stock.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDo I need the BT03 if my buttstock has a Picatinny rail?\u003c\/b\u003e\u003cbr\u003eNo — with a rail under the buttstock you can use a Precision Rail Monopod such as the BT12-QK, which clamps directly to the rail and needs no sling stud.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT03 sling stud accessory.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345963192694,"sku":"BT03","price":18.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt03-sling-stud-accessory-m1a-ar15-ar10-1.jpg?v=1786218034"},{"product_id":"accu-shot-bt07-tac-cap-steel-replacement-cap","title":"Accu-Shot BT07 Tac-Cap Steel Replacement Cap","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT07 Tac-Cap Steel Replacement Cap\u003c\/b\u003e, part number BT07 from B\u0026amp;T Industries, is a steel replacement for the standard plastic cap fitted to Accu-Shot monopods. It is the harder-wearing option for a rifle that gets worked hard in the field.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT07 is an upgrade part, not a monopod. The monopods it serves are the sling stud models such as the \u003ca href=\"\/products\/accu-shot-bt04-qk-monopod-sling-stud-mount\"\u003eAccu-Shot BT04-QK locking monopod\u003c\/a\u003e, the Precision Rail Monopods such as the \u003ca href=\"\/products\/accu-shot-bt12-qk-monopod-prm-mount\"\u003eAccu-Shot BT12-QK PRM monopod\u003c\/a\u003e, and the Accuracy International models such as the \u003ca href=\"\/products\/accu-shot-bt08-qk-accuracy-international-asai-monopod\"\u003eAccu-Shot BT08-QK ASAI monopod\u003c\/a\u003e. The full line is in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeer stalkers whose monopod takes a beating on rock and hard ground\u003c\/li\u003e\n\u003cli\u003ePractical and service rifle shooters working off barricades\u003c\/li\u003e\n\u003cli\u003eReplacing a worn or damaged plastic cap\u003c\/li\u003e\n\u003cli\u003eAnyone who wants a steel part rather than a plastic one\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Monopod replacement cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e Steel, replacing the standard plastic cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose:\u003c\/b\u003e A harder-wearing cap for hard use\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e Accu-Shot monopods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMonopod replacement cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eReplaces\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard plastic cap on Accu-Shot monopods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT07 \/ BT07 \/ 810040220388\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT07 Tac-Cap\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot part is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the Accu-Shot BT07 Tac-Cap?\u003c\/b\u003e\u003cbr\u003eThe BT07 Tac-Cap is a steel replacement for the standard plastic cap fitted to Accu-Shot monopods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhy fit a steel cap instead of the standard plastic one?\u003c\/b\u003e\u003cbr\u003eThe steel Tac-Cap is a harder-wearing upgrade, which suits rifles that are used hard in the field where a plastic cap would take more punishment.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich monopods does the Accu-Shot BT07 fit?\u003c\/b\u003e\u003cbr\u003eThe BT07 is the replacement cap for Accu-Shot monopods, which covers the sling stud, Precision Rail Monopod and Accuracy International models in the Accu-Shot line.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT07 Tac-Cap.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345963225462,"sku":"BT07","price":9.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt07-tac-cap-steel-replacement-cap-1.jpg?v=1786218034"},{"product_id":"accu-shot-bt0857-b-replacement-bolt-m6-80-80","title":"Accu-Shot BT0857-B Replacement Bolt M6 x 80 x 80","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT0857-B Replacement Bolt\u003c\/b\u003e, part number BT0857-B from B\u0026amp;T Industries, is the standard M6 × 80 × 80 bolt for the BT08-QK and BT57-QK Accuracy International monopods. It is the correct spare when the original bolt is lost or damaged.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT0857-B is the standard-length bolt. If your rifle has additional length-of-pull spacers fitted, the longer \u003ca href=\"\/products\/accu-shot-bt0857-lb-replacement-bolt-m6-80-100\"\u003eAccu-Shot BT0857-LB replacement bolt in M6 × 80 × 100\u003c\/a\u003e is required instead. The monopods these bolts belong to are the \u003ca href=\"\/products\/accu-shot-bt08-qk-accuracy-international-asai-monopod\"\u003eAccu-Shot BT08-QK ASAI monopod\u003c\/a\u003e for AE, AW and AICS pattern stocks and the \u003ca href=\"\/products\/accu-shot-bt57-qk-accuracy-international-at-asaiat-monopod\"\u003eAccu-Shot BT57-QK ASAIAT monopod\u003c\/a\u003e for the AI AT. Both are in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAccuracy International rifles fitted with a BT08-QK or BT57-QK monopod\u003c\/li\u003e\n\u003cli\u003eReplacing a bolt lost during a stock strip or rebuild\u003c\/li\u003e\n\u003cli\u003eKeeping a spare with the rifle's kit\u003c\/li\u003e\n\u003cli\u003eRifles at standard length of pull, with no extra spacers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Replacement bolt, standard length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize:\u003c\/b\u003e M6 × 80 × 80\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e BT08-QK and BT57-QK Accuracy International monopods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLonger version:\u003c\/b\u003e BT0857-LB in M6 × 80 × 100, for use with length-of-pull spacers\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eReplacement bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSize\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM6 × 80 × 80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT08-QK and BT57-QK monopods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLonger Alternative\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT0857-LB (M6 × 80 × 100)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT0857-B \/ BT0857-B \/ —\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× M6 × 80 × 80 replacement bolt\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot part is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich monopods does the Accu-Shot BT0857-B bolt fit?\u003c\/b\u003e\u003cbr\u003eThe BT0857-B fits the BT08-QK and BT57-QK Accuracy International monopods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat size is the Accu-Shot BT0857-B bolt?\u003c\/b\u003e\u003cbr\u003eThe BT0857-B is an M6 × 80 × 80 bolt, which is the standard length for these monopods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhen do I need the longer BT0857-LB bolt instead?\u003c\/b\u003e\u003cbr\u003eThe longer BT0857-LB in M6 × 80 × 100 is required when additional length-of-pull spacers are fitted to the rifle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one M6 × 80 × 80 replacement bolt.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345963290998,"sku":"BT0857-B","price":7.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt0857-b-replacement-bolt-m6-80-80-1.jpg?v=1786218033"},{"product_id":"accu-shot-bt0857-lb-replacement-bolt-m6-80-100","title":"Accu-Shot BT0857-LB Replacement Bolt M6 x 80 x 100","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT0857-LB Replacement Bolt\u003c\/b\u003e, part number BT0857-LB from B\u0026amp;T Industries, is the long M6 × 80 × 100 bolt for the BT08-QK and BT57-QK Accuracy International monopods. It is the bolt required when additional length-of-pull spacers are fitted to the rifle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe extra length is the whole point: at standard length of pull, the shorter \u003ca href=\"\/products\/accu-shot-bt0857-b-replacement-bolt-m6-80-80\"\u003eAccu-Shot BT0857-B replacement bolt in M6 × 80 × 80\u003c\/a\u003e is the correct part. The monopods these bolts belong to are the \u003ca href=\"\/products\/accu-shot-bt08-qk-accuracy-international-asai-monopod\"\u003eAccu-Shot BT08-QK ASAI monopod\u003c\/a\u003e for AE, AW and AICS pattern stocks and the \u003ca href=\"\/products\/accu-shot-bt57-qk-accuracy-international-at-asaiat-monopod\"\u003eAccu-Shot BT57-QK ASAIAT monopod\u003c\/a\u003e for the AI AT. Both are in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAccuracy International rifles with length-of-pull spacers fitted\u003c\/li\u003e\n\u003cli\u003eTaller shooters who have lengthened the stock\u003c\/li\u003e\n\u003cli\u003eReplacing a bolt lost during a stock strip or rebuild\u003c\/li\u003e\n\u003cli\u003eBT08-QK and BT57-QK monopod owners adding spacers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Replacement bolt, long\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize:\u003c\/b\u003e M6 × 80 × 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e BT08-QK and BT57-QK Accuracy International monopods with length-of-pull spacers\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStandard version:\u003c\/b\u003e BT0857-B in M6 × 80 × 80, for a rifle without extra spacers\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eReplacement bolt, long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSize\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM6 × 80 × 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT08-QK and BT57-QK monopods (with length-of-pull spacers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard Alternative\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT0857-B (M6 × 80 × 80)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT0857-LB \/ BT0857-LB \/ —\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× M6 × 80 × 100 replacement bolt\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot part is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich monopods does the Accu-Shot BT0857-LB bolt fit?\u003c\/b\u003e\u003cbr\u003eThe BT0857-LB fits the BT08-QK and BT57-QK Accuracy International monopods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat size is the Accu-Shot BT0857-LB bolt?\u003c\/b\u003e\u003cbr\u003eThe BT0857-LB is an M6 × 80 × 100 bolt, which is the long version in this pair of part numbers.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhen do I need the BT0857-LB rather than the BT0857-B?\u003c\/b\u003e\u003cbr\u003eThe longer BT0857-LB is required when additional length-of-pull spacers are fitted; without spacers, the standard BT0857-B in M6 × 80 × 80 is the correct bolt.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one M6 × 80 × 100 replacement bolt.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345963356534,"sku":"BT0857-LB","price":8.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt0857-lb-replacement-bolt-m6-80-100-1.jpg?v=1786218033"},{"product_id":"accu-shot-bt14-threaded-magpul-prs-sling-studs","title":"Accu-Shot BT14 Threaded Magpul PRS Sling Studs","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT14 Threaded Magpul PRS Sling Studs\u003c\/b\u003e, part number BT14 from B\u0026amp;T Industries, are threaded sling studs for the Magpul PRS stock. They let a sling-stud-mounted Accu-Shot monopod be fitted to a PRS-equipped rifle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT14 is the Magpul PRS answer. On M1-A, AR-15 and AR-10 pattern stocks the equivalent is the \u003ca href=\"\/products\/accu-shot-bt03-sling-stud-accessory-m1a-ar15-ar10\"\u003eAccu-Shot BT03 sling stud accessory\u003c\/a\u003e. If your stock has a Picatinny rail under the butt, a Precision Rail Monopod such as the \u003ca href=\"\/products\/accu-shot-bt13-qk-monopod-prm-mount\"\u003eAccu-Shot BT13-QK PRM monopod\u003c\/a\u003e clamps straight to it and no stud is needed. All of the monopods are in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRifles fitted with the Magpul PRS stock\u003c\/li\u003e\n\u003cli\u003ePractical and service rifle builds on AR-pattern rifles\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting with a rear monopod\u003c\/li\u003e\n\u003cli\u003eAdding monopod mounting without changing the stock\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Threaded sling studs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e Magpul PRS stock\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose:\u003c\/b\u003e Provides the stud a sling-stud Accu-Shot monopod mounts to\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorks with:\u003c\/b\u003e \u003ca href=\"\/products\/accu-shot-bt01-qk-monopod-sling-stud-mount\"\u003eBT01-QK\u003c\/a\u003e, \u003ca href=\"\/products\/accu-shot-bt04-qk-monopod-sling-stud-mount\"\u003eBT04-QK\u003c\/a\u003e, \u003ca href=\"\/products\/accu-shot-bt05-qk-monopod-sling-stud-mount\"\u003eBT05-QK\u003c\/a\u003e and \u003ca href=\"\/products\/accu-shot-bt06-qk-monopod-sling-stud-mount\"\u003eBT06-QK\u003c\/a\u003e sling stud monopods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eThreaded sling studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMagpul PRS stock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eUsed With\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSling stud mount Accu-Shot monopods (BT01-QK, BT04-QK, BT05-QK, BT06-QK)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT14 \/ BT14 \/ —\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAccu-Shot BT14 threaded PRS sling studs\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThese Accu-Shot studs are dispatched tracked from our UK warehouse — no import duties and no customs delays — and are backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the Accu-Shot BT14 do?\u003c\/b\u003e\u003cbr\u003eThe BT14 provides threaded sling studs for the Magpul PRS stock, so that a sling-stud-mounted Accu-Shot monopod can be fitted to a PRS-equipped rifle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich stock does the Accu-Shot BT14 fit?\u003c\/b\u003e\u003cbr\u003eThe BT14 is made for the Magpul PRS stock.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich monopods work with the Accu-Shot BT14?\u003c\/b\u003e\u003cbr\u003eThe BT14 supports the sling stud mount Accu-Shot monopods, which are the BT01-QK, BT04-QK, BT05-QK and BT06-QK.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the equivalent part for an AR-15 or M1-A stock?\u003c\/b\u003e\u003cbr\u003eThe BT03 sling stud accessory is the equivalent for M1-A, AR-15 and AR-10 pattern stocks.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains the Accu-Shot BT14 threaded Magpul PRS sling studs.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345963487606,"sku":"BT14","price":6.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt14-threaded-magpul-prs-sling-studs-1.jpg?v=1786218033"},{"product_id":"accu-shot-bt26-car-adapter","title":"Accu-Shot BT26 CAR Adapter","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT26 CAR Adapter\u003c\/b\u003e, part number BT26 from B\u0026amp;T Industries, is the adapter for mounting Accu-Shot support gear on CAR-pattern stocks.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT26 covers CAR-pattern stocks. The other stock-specific solutions in the Accu-Shot range are the \u003ca href=\"\/products\/accu-shot-bt52-acs-str-picatinny-rail-adapter-kit\"\u003eBT52 for Magpul ACS and STR stocks\u003c\/a\u003e, the \u003ca href=\"\/products\/accu-shot-bt51-ace-skeleton-stock-monopod-bracket\"\u003eBT51 for ACE skeleton stocks\u003c\/a\u003e, the \u003ca href=\"\/products\/accu-shot-bt14-threaded-magpul-prs-sling-studs\"\u003eBT14 threaded studs for the Magpul PRS\u003c\/a\u003e and the \u003ca href=\"\/products\/accu-shot-bt03-sling-stud-accessory-m1a-ar15-ar10\"\u003eBT03 sling stud accessory for M1-A, AR-15 and AR-10 stocks\u003c\/a\u003e. The monopods themselves are in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRifles fitted with CAR-pattern stocks\u003c\/li\u003e\n\u003cli\u003ePractical and service rifle builds\u003c\/li\u003e\n\u003cli\u003eCarbine setups being fitted with Accu-Shot support gear\u003c\/li\u003e\n\u003cli\u003eAdding a mounting interface to a stock that has none\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e CAR adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e CAR-pattern stocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose:\u003c\/b\u003e Mounts Accu-Shot support gear on a CAR-pattern stock\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eCAR adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eCAR-pattern stocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePurpose\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMounting Accu-Shot support gear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT26 \/ BT26 \/ —\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT26 CAR adapter\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot adapter is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich stocks does the Accu-Shot BT26 fit?\u003c\/b\u003e\u003cbr\u003eThe BT26 is B\u0026amp;T's adapter for CAR-pattern stocks.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the Accu-Shot BT26 used for?\u003c\/b\u003e\u003cbr\u003eThe BT26 is used to mount Accu-Shot support gear on a CAR-pattern stock.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs there an equivalent adapter for other stocks?\u003c\/b\u003e\u003cbr\u003eYes — B\u0026amp;T make stock-specific parts including the BT52 for Magpul ACS and STR stocks, the BT51 for ACE skeleton stocks, the BT14 threaded studs for the Magpul PRS and the BT03 sling stud accessory for M1-A, AR-15 and AR-10 patterns.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT26 CAR adapter.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345963520374,"sku":"BT26","price":42.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt26-car-adapter-1.jpg?v=1785277322"},{"product_id":"accu-shot-bt29-sako-trg-rail-kit","title":"Accu-Shot BT29 Sako TRG Rail Kit","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT29 Sako TRG Rail Kit\u003c\/b\u003e, part number BT29 from B\u0026amp;T Industries, adds monopod rail mounting to the Sako TRG. It is compatible with the BT12-QK Precision Rail Monopod specifically.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT29 is TRG-specific and pairs with one monopod: the \u003ca href=\"\/products\/accu-shot-bt12-qk-monopod-prm-mount\"\u003eAccu-Shot BT12-QK PRM monopod\u003c\/a\u003e. For the front of the same rifle, the \u003ca href=\"\/products\/atlas-bipod-bt21-trg-bracket\"\u003eAtlas BT21 TRG bracket\u003c\/a\u003e mounts Atlas bipods to the TRG. Other stock-specific monopod rail kits in the range include the \u003ca href=\"\/products\/accu-shot-bt52-acs-str-picatinny-rail-adapter-kit\"\u003eBT52 for Magpul ACS and STR stocks\u003c\/a\u003e, the \u003ca href=\"\/products\/accu-shot-bt78-sig-sauer-cross-buttstock-rail-kit\"\u003eBT78 for the SIG Sauer CROSS\u003c\/a\u003e and the \u003ca href=\"\/products\/accu-shot-bt84-krg-10-22-bravo-rail-kit\"\u003eBT84 for the KRG Bravo\u003c\/a\u003e. All are listed in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSako TRG rifles used for deer stalking and long-range work\u003c\/li\u003e\n\u003cli\u003eTarget, F-Class and practical rifle on a TRG\u003c\/li\u003e\n\u003cli\u003eTRG owners adding a rear monopod to a bipod-equipped rifle\u003c\/li\u003e\n\u003cli\u003eCompleting a front-and-rear support setup on the same rifle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Monopod rail kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e Sako TRG\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatibility:\u003c\/b\u003e BT12-QK Precision Rail Monopod only\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront support:\u003c\/b\u003e Pairs with the BT21 TRG bracket and an Atlas bipod\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMonopod rail kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSako TRG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMonopod Compatibility\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT12-QK only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT29 \/ BT29 \/ 810040220302\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT29 Sako TRG rail kit with fixings\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot rail kit is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich rifle does the Accu-Shot BT29 rail kit fit?\u003c\/b\u003e\u003cbr\u003eThe BT29 rail kit is made for the Sako TRG.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich monopod works with the Accu-Shot BT29?\u003c\/b\u003e\u003cbr\u003eThe BT29 is compatible with the BT12-QK Precision Rail Monopod specifically, so the taller BT13-QK and BT31-QK are not the right choice with this kit.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow do I mount an Atlas bipod to a Sako TRG?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT21 TRG bracket mounts Atlas bipods to the TRG and incorporates a 1913 Picatinny rail, so two-screw and ADM lever bipods clamp straight on.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT29 Sako TRG rail kit with its fixings.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345964732790,"sku":"BT29","price":39.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt29-sako-trg-rail-kit-1.jpg?v=1786218033"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/collections\/hf_20260727_134335_7bd32576-6df3-4cd7-a2bc-c1493c0d897b.png?v=1785160553","url":"https:\/\/xtremetactical.co.uk\/collections\/b-t-industries.oembed?page=4","provider":"Xtreme Tactical","version":"1.0","type":"link"}