{"title":"Bipod Accessories","description":"\u003cp\u003eFeet, rails, adapters, clamps and genuine spares for Atlas and Accu-Tac bipods — ski feet, Raider cleats, rubber feet, spiked feet and Spike Claws, leg extensions, bipod pouches, sling stud adapters, and ARCA and Picatinny clamps from B\u0026amp;T Industries, American Defense, Area 419, Really Right Stuff and Arisaka Defense.\u003c\/p\u003e\n\u003cp\u003eFeet are the cheapest upgrade in the whole vertical and the one most people skip. Spikes bite into soft stubble or a peat hag; rubber grips a concrete bench or a high seat rail; ski and sled feet let a heavy rifle track straight back under recoil instead of hopping, which is what makes the shot-to-shot return repeatable on the F-Class line.\u003c\/p\u003e\n\u003cp\u003eFitting these to something? The legs are in \u003ca href=\"\/collections\/rifle-bipods\"\u003erifle bipods\u003c\/a\u003e, broken out by maker as \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas\u003c\/a\u003e, \u003ca href=\"\/collections\/accu-tac\"\u003eAccu-Tac\u003c\/a\u003e and the wider \u003ca href=\"\/collections\/b-t-industries\"\u003eB\u0026amp;T Industries\u003c\/a\u003e catalogue, with \u003ca href=\"\/collections\/arca-bipods\"\u003eARCA bipods and clamps\u003c\/a\u003e for dovetail forends and \u003ca href=\"\/collections\/f-class-benchrest-bipods\"\u003eF-Class and benchrest models\u003c\/a\u003e for the bench. The \u003ca href=\"\/collections\/arisaka-defense\"\u003eArisaka Defense\u003c\/a\u003e rail slider repositions an Atlas along a Picatinny forend without unclamping it, the \u003ca href=\"\/collections\/really-right-stuff\"\u003eReally Right Stuff\u003c\/a\u003e BTC-Pro is a dual ARCA and Picatinny clamp, and \u003ca href=\"\/collections\/area-419\"\u003eArea 419\u003c\/a\u003e makes the ARCALOCK hardware. For the rear of the rifle see \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopods\u003c\/a\u003e, and everything sits under \u003ca href=\"\/collections\/bipods-monopods\"\u003eshooting support\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eAre Atlas and Accu-Tac feet interchangeable?\u003c\/b\u003e\u003cbr\u003eNo. Each maker uses its own foot fitting, and within Atlas the 5-H and Super CAL take different feet from the V8, PSR and CAL. Check the model stated on the listing before ordering — Accu-Tac G1 and G2 spiked feet are not the same part either.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHow do I get ARCA on a Picatinny bipod?\u003c\/b\u003e\u003cbr\u003eWith a clamp rather than a new bipod. The Area 419 ARCALOCK clamps and the American Defense ADM QD ARCA rail lever both convert an Atlas, and the Really Right Stuff BTC-Pro grips ARCA and Picatinny both. They are gathered in \u003ca href=\"\/collections\/arca-bipods\"\u003eARCA bipods and clamps\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMy rifle only has a front sling stud. What do I need?\u003c\/b\u003e\u003cbr\u003eA stud-to-rail adapter. The Atlas BT81 Lil' Brandi and the Accu-Tac sling stud rail adapters give a short section of Picatinny under a conventional sporter forend, which most stalking rifles need.\u003c\/p\u003e","products":[{"product_id":"accu-tac-g2-spiked-feet-set","title":"Accu-Tac G2 Spiked Feet Set – LRS-0200","description":"\u003cp\u003eThe \u003cb\u003eAccu-Tac G2 Spiked Feet Set\u003c\/b\u003e, part number \u003cb\u003eLRS-0200\u003c\/b\u003e, is a pair of hardened steel spiked feet that replace the rubber feet on any Accu-Tac G2-series or Arca-Spec bipod, weighing 1.7 oz \/ 48 g each.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThese are the G2 feet. They fit the current G2-series and Arca-Spec bipods including the \u003ca href=\"\/products\/accu-tac-br-4-g2-picatinny-qd-bipod-black\"\u003eAccu-Tac BR-4 G2 Picatinny QD bipod\u003c\/a\u003e, \u003ca href=\"\/products\/accu-tac-sr-5-g2-arca-spec-qd-bipod-black\"\u003eAccu-Tac SR-5 G2 Arca-Spec QD bipod\u003c\/a\u003e, \u003ca href=\"\/products\/accu-tac-fc-4-g2-f-class-picatinny-qd-bipod-black\"\u003eAccu-Tac FC-4 G2 F-Class bipod\u003c\/a\u003e and \u003ca href=\"\/products\/accu-tac-hd-50-arca-spec-qd-bipod-black\"\u003eAccu-Tac HD-50 Arca-Spec QD bipod\u003c\/a\u003e. If your bipod is a first-generation SR-5, BR-4 or FC-5 QD, you need the \u003ca href=\"\/products\/accu-tac-g1-spiked-feet-set\"\u003eAccu-Tac G1 Spiked Feet Set\u003c\/a\u003e instead — the two are not interchangeable. For extra bite in mud and snow, \u003ca href=\"\/products\/accu-tac-spike-claws\"\u003eAccu-Tac Spike Claws\u003c\/a\u003e screw onto the spikes, and the \u003ca href=\"\/products\/accu-tac-sled-feet\"\u003eAccu-Tac Sled Feet\u003c\/a\u003e slide rather than dig in on a bench. See \u003ca href=\"\/collections\/bipod-accessories\"\u003ethe full bipod accessories range\u003c\/a\u003e and \u003ca href=\"\/collections\/accu-tac\"\u003eevery Accu-Tac bipod we stock\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProne deer stalking on soft ground, ploughed field or peat\u003c\/li\u003e\n\u003cli\u003eNight fox and vermin control where the bipod must not slip on wet grass\u003c\/li\u003e\n\u003cli\u003eF-Class and benchrest shooting off turf rather than a concrete firing point\u003c\/li\u003e\n\u003cli\u003eAnyone who wants to swap between rubber feet and spikes between stands\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTraction:\u003c\/b\u003e Hardened steel spikes bite into dirt, sand and soft ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e Knurled aluminium base screws on and off by hand once the supplied wrench has broken it loose\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction:\u003c\/b\u003e 6061-T6 aluminium body with black-oxide-treated steel hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatibility:\u003c\/b\u003e All Accu-Tac G2-series and Arca-Spec bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight:\u003c\/b\u003e 1.7 oz \/ 48 g per foot\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6061-T6 aluminium; steel spikes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFinish \/ Coating\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWeight\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.7 oz \/ 48 g (each)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColour\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFlat black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatibility\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAll Accu-Tac G2-series \u0026amp; Arca-Spec bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCountry of Origin\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAccu-Tac (USA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eLRS-0200 \/ LRS-0200 \/ 858520006077\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 × G2 spiked feet\u003c\/li\u003e\n\u003cli\u003eInstallation wrench\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eCovered by the Accu-Tac Limited Warranty against defects in materials and workmanship.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eEvery order is dispatched tracked from our UK warehouse, so there are no import duties or customs surprises, and you are backed by UK-based aftersales support from our team.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich bipods does the Accu-Tac G2 Spiked Feet Set fit?\u003c\/b\u003e\u003cbr\u003eThe Accu-Tac G2 Spiked Feet Set fits all Accu-Tac G2-series and Arca-Spec bipods, including the BR-4 G2, FC-4 G2, FC-5 G2, LR-10 G2 and HD-50.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the Accu-Tac G2 Spiked Feet Set fit a first-generation Accu-Tac bipod?\u003c\/b\u003e\u003cbr\u003eNo. First-generation G1 bipods — the original SR-5, SR-5 QD, BR-4, BR-4 QD and FC-5 QD — take the Accu-Tac G1 Spiked Feet Set (SRS-0200) instead.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDo I need tools to fit the Accu-Tac G2 Spiked Feet Set?\u003c\/b\u003e\u003cbr\u003eAn installation wrench is supplied. Once loosened, the knurled base screws on and off by hand in seconds.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow much does each foot weigh?\u003c\/b\u003e\u003cbr\u003eEach spiked foot weighs 1.7 oz \/ 48 g, so the pair adds 3.4 oz \/ 96 g to the bipod.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat are the Accu-Tac G2 Spiked Feet made from?\u003c\/b\u003e\u003cbr\u003eThe body is 6061-T6 aluminium and the spikes and hardware are steel with a black-oxide finish.\u003c\/p\u003e","brand":"Accu-Tac","offers":[{"title":"Default Title","offer_id":58307897786742,"sku":"LRS-0200","price":41.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-tac-g2-spiked-feet-set-1.jpg?v=1785269881"},{"product_id":"accu-tac-sling-stud-rail-adapter","title":"Accu-Tac Sling Stud Rail Adapter – SSRA-200","description":"\u003cp\u003eThe \u003cb\u003eAccu-Tac Sling Stud Rail Adapter\u003c\/b\u003e, part number \u003cb\u003eSSRA-200\u003c\/b\u003e, converts a standard rifle sling stud into a Picatinny 1913 \/ NATO 4694 rail section 2.8″ (71 mm) long, so any Accu-Tac bipod can be fitted to a sporter stock.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eMost British stalking rifles leave the factory with a sling stud and no rail, which is exactly the gap this fills. It bolts to the stud and presents a short Picatinny section, so a Picatinny-clamp bipod such as the \u003ca href=\"\/products\/accu-tac-br-4-g2-picatinny-qd-bipod-black\"\u003eAccu-Tac BR-4 G2 Picatinny QD bipod\u003c\/a\u003e or \u003ca href=\"\/products\/accu-tac-ht-10-picatinny-hunting-bipod-black\"\u003eAccu-Tac HT-10 Picatinny hunting bipod\u003c\/a\u003e goes straight on. If your bipod is one of the Arca-Spec models, use the \u003ca href=\"\/products\/accu-tac-arca-sling-stud-rail-adapter\"\u003eAccu-Tac Arca Sling Stud Rail Adapter\u003c\/a\u003e instead. To add a rail elsewhere on the stock, see the \u003ca href=\"\/products\/accu-tac-picatinny-rail-mount\"\u003eAccu-Tac Picatinny Rail Mount\u003c\/a\u003e. Browse \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod rails, clamps and adapters\u003c\/a\u003e and \u003ca href=\"\/collections\/accu-tac\"\u003ethe full Accu-Tac collection\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeer stalking rifles with a sporter stock and a front sling stud but no rail\u003c\/li\u003e\n\u003cli\u003eFitting a Picatinny-clamp bipod to a wooden or synthetic hunting stock\u003c\/li\u003e\n\u003cli\u003eMoving one bipod between a chassis rifle and a stalking rifle\u003c\/li\u003e\n\u003cli\u003eAny rifle where drilling for a rail is not an option\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eFunction:\u003c\/b\u003e Turns a standard front sling stud into a Picatinny rail section\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRail interface:\u003c\/b\u003e Picatinny 1913 \/ NATO 4694\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize:\u003c\/b\u003e 2.8″ (71 mm) long × 1.4″ (36 mm) wide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatibility:\u003c\/b\u003e All Accu-Tac bipods with a Picatinny clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction:\u003c\/b\u003e 6061-T6 aluminium with stainless-steel hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Type III MIL-SPEC hard-anodise, flat black\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight:\u003c\/b\u003e 0.5 oz (14 g)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6061-T6 aluminium; stainless-steel hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFinish\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eType III MIL-SPEC hard-anodise (flat black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRail Interface\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePicatinny 1913 \/ NATO 4694\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOverall Length\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.8″ (71 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOverall Width\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.4″ (36 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWeight\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e0.5 oz (14 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatibility\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAll Accu-Tac bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInstallation Hardware\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSteel locking pin (Ø 1\/8″ × 3\/4″, 3.2 × 19 mm); 7\/8″ (22 mm) aluminium nut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCountry of Origin\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAccu-Tac (USA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSSRA-200 \/ SSRA-200 \/ 858520006206\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSling Stud Rail Adapter\u003c\/li\u003e\n\u003cli\u003eSteel locking pin\u003c\/li\u003e\n\u003cli\u003e7\/8″ aluminium nut\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eCovered by the Accu-Tac Limited Warranty against defects in materials and workmanship.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eEvery order is dispatched tracked from our UK warehouse, so there are no import duties or customs surprises, and you are backed by UK-based aftersales support from our team.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the Accu-Tac Sling Stud Rail Adapter do?\u003c\/b\u003e\u003cbr\u003eIt bolts to a standard front sling stud and presents a Picatinny 1913 \/ NATO 4694 rail section, so a Picatinny-clamp bipod can be fitted to a stock that has no rail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich bipods work with the Accu-Tac Sling Stud Rail Adapter?\u003c\/b\u003e\u003cbr\u003eAny Accu-Tac bipod with a Picatinny clamp. For Arca-Spec bipods use the Accu-Tac Arca Sling Stud Rail Adapter (ASSRA-300) instead.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow long is the rail on the Accu-Tac Sling Stud Rail Adapter?\u003c\/b\u003e\u003cbr\u003eThe adapter is 2.8″ (71 mm) long and 1.4″ (36 mm) wide.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat hardware is supplied with the Accu-Tac Sling Stud Rail Adapter?\u003c\/b\u003e\u003cbr\u003eA steel locking pin (Ø 1\/8″ × 3\/4″, 3.2 × 19 mm) and a 7\/8″ (22 mm) aluminium nut.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow much does the Accu-Tac Sling Stud Rail Adapter weigh?\u003c\/b\u003e\u003cbr\u003eIt weighs 0.5 oz (14 g).\u003c\/p\u003e","brand":"Accu-Tac","offers":[{"title":"Default Title","offer_id":58307897852278,"sku":"SSRA-200","price":70.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-tac-sling-stud-rail-adapter-1.jpg?v=1785271816"},{"product_id":"accu-tac-spike-claws","title":"Accu-Tac Spike Claws – LRSC-0001","description":"\u003cp\u003eThe \u003cb\u003eAccu-Tac Spike Claws\u003c\/b\u003e, part number \u003cb\u003eLRSC-0001\u003c\/b\u003e, are screw-on claw extensions that thread onto the spikes of any Accu-Tac G1, G2 or Arca-Spec spiked foot, adding 1.0 oz \/ 29 g per set.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eClaws are the answer when a bare spike sinks straight through soft going instead of gripping it — deep mud, snow, wet peat. They screw onto the existing spike thread on either the \u003ca href=\"\/products\/accu-tac-g2-spiked-feet-set\"\u003eAccu-Tac G2 Spiked Feet Set\u003c\/a\u003e or the \u003ca href=\"\/products\/accu-tac-g1-spiked-feet-set\"\u003eAccu-Tac G1 Spiked Feet Set\u003c\/a\u003e, so they add to what you already have rather than replacing it. On a bench or concrete firing point use the \u003ca href=\"\/products\/accu-tac-sled-feet\"\u003eAccu-Tac Sled Feet\u003c\/a\u003e or \u003ca href=\"\/products\/accu-tac-p-ski-feet\"\u003eAccu-Tac P-SKI Feet\u003c\/a\u003e instead. See \u003ca href=\"\/collections\/bipod-accessories\"\u003eall bipod feet and adapters\u003c\/a\u003e and \u003ca href=\"\/collections\/accu-tac\"\u003ethe wider Accu-Tac line-up\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNight fox and vermin control across wet, ploughed or boggy ground\u003c\/li\u003e\n\u003cli\u003eWinter deer stalking in snow or deep mud\u003c\/li\u003e\n\u003cli\u003eProne shooting on peat and moorland where a bare spike sinks\u003c\/li\u003e\n\u003cli\u003eAdding grip without buying a second set of feet\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose:\u003c\/b\u003e Spread the load of a spike so it grips soft ground instead of sinking\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e Screw onto the existing spiked-foot thread — no tools or replacement feet needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatibility:\u003c\/b\u003e All Accu-Tac G1, G2 and Arca-Spec spikes\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction:\u003c\/b\u003e 6061-T6 aluminium with steel claws\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Black oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight:\u003c\/b\u003e 1.0 oz \/ 29 g per set\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6061-T6 aluminium; steel claws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFinish\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack oxide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWeight (per set)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.0 oz (29 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatibility\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAll Accu-Tac G1\/G2 \u0026amp; Arca-Spec spikes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInstallation\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eScrew-on to spiked foot threads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCountry of Origin\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAccu-Tac (USA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eLRSC-0001 \/ LRSC-0001 \/ 858520006220\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 spike claws\u003c\/li\u003e\n\u003cli\u003eInstruction sheet\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eCovered by the Accu-Tac Limited Warranty against defects in materials and workmanship.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eEvery order is dispatched tracked from our UK warehouse, so there are no import duties or customs surprises, and you are backed by UK-based aftersales support from our team.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat do the Accu-Tac Spike Claws do?\u003c\/b\u003e\u003cbr\u003eThey screw onto the spikes of an Accu-Tac spiked foot and spread the load, so the bipod grips soft ground such as mud or snow instead of sinking into it.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich feet do the Accu-Tac Spike Claws fit?\u003c\/b\u003e\u003cbr\u003eThey fit all Accu-Tac G1, G2 and Arca-Spec spikes, so they work with both the G2 Spiked Feet Set and the older G1 Spiked Feet Set.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDo I need spiked feet already fitted to use the Accu-Tac Spike Claws?\u003c\/b\u003e\u003cbr\u003eYes. The claws screw onto the thread of an existing spiked foot, so a spiked feet set must be fitted to the bipod first.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow much do the Accu-Tac Spike Claws weigh?\u003c\/b\u003e\u003cbr\u003eThe set weighs 1.0 oz \/ 29 g.\u003c\/p\u003e","brand":"Accu-Tac","offers":[{"title":"Default Title","offer_id":58307897885046,"sku":"LRSC-0001","price":35.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-tac-spike-claws-1.jpg?v=1785269431"},{"product_id":"accu-tac-sled-feet","title":"Accu-Tac Sled Feet – SF-A000","description":"\u003cp\u003eThe \u003cb\u003eAccu-Tac Sled Feet\u003c\/b\u003e, part number \u003cb\u003eSF-A000\u003c\/b\u003e, are a pair of wide aluminium sled feet for all Accu-Tac G1 and G2 bipods, weighing 3.8 oz \/ 108 g per set.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSled feet are for surfaces you want the rifle to slide on rather than grip: a bench top, a concrete firing point, a shooting mat. That controlled slide lets the rifle track straight back under recoil instead of hopping. For soft ground you want the opposite — the \u003ca href=\"\/products\/accu-tac-g2-spiked-feet-set\"\u003eAccu-Tac G2 Spiked Feet Set\u003c\/a\u003e or, in mud and snow, \u003ca href=\"\/products\/accu-tac-spike-claws\"\u003eAccu-Tac Spike Claws\u003c\/a\u003e. On the widest bipods the \u003ca href=\"\/products\/accu-tac-p-ski-feet\"\u003eAccu-Tac P-SKI Feet\u003c\/a\u003e do a similar job with a longer contact surface. Browse \u003ca href=\"\/collections\/f-class-benchrest-bipods\"\u003eF-Class and benchrest bipods\u003c\/a\u003e and \u003ca href=\"\/collections\/bipod-accessories\"\u003ethe bipod accessories range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eF-Class and benchrest shooting from a concrete or wooden firing point\u003c\/li\u003e\n\u003cli\u003eLoad development and zeroing from a bench\u003c\/li\u003e\n\u003cli\u003eTarget rifle off a mat where spikes would snag\u003c\/li\u003e\n\u003cli\u003eAny rifle that needs to track straight back under recoil\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose:\u003c\/b\u003e Wide sled surface lets the rifle slide straight back under recoil rather than hop\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e Screw in using the supplied hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatibility:\u003c\/b\u003e All Accu-Tac G1 and G2 bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction:\u003c\/b\u003e 6061-T6 aluminium with stainless-steel hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Type III MIL-SPEC hard-anodise, matte black\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight:\u003c\/b\u003e 3.8 oz \/ 108 g per set\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6061-T6 aluminium; stainless-steel hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFinish\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eType III MIL-SPEC hard-anodise (matte black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWeight (per set)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.8 oz (108 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColour\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFlat black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatibility\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAll Accu-Tac G1 \u0026amp; G2 bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eInstallation\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eScrew-in using supplied hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCountry of Origin\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAccu-Tac (USA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSF-A000 \/ SF-A000 \/ 858520006275\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2 sled feet\u003c\/li\u003e\n\u003cli\u003eMounting screws \u0026amp; washers\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eCovered by the Accu-Tac Limited Warranty against defects in materials and workmanship.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eEvery order is dispatched tracked from our UK warehouse, so there are no import duties or customs surprises, and you are backed by UK-based aftersales support from our team.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich bipods do the Accu-Tac Sled Feet fit?\u003c\/b\u003e\u003cbr\u003eThe Accu-Tac Sled Feet fit all Accu-Tac G1 and G2 bipods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat are the Accu-Tac Sled Feet for?\u003c\/b\u003e\u003cbr\u003eThey give a wide, smooth contact surface so the rifle slides straight back under recoil on a bench, concrete firing point or mat, instead of digging in and hopping.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow are the Accu-Tac Sled Feet fitted?\u003c\/b\u003e\u003cbr\u003eThey screw into the bipod legs using the hardware supplied in the set.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow much do the Accu-Tac Sled Feet weigh?\u003c\/b\u003e\u003cbr\u003eThe pair weighs 3.8 oz \/ 108 g.\u003c\/p\u003e","brand":"Accu-Tac","offers":[{"title":"Default Title","offer_id":58307898802550,"sku":"SF-A000","price":70.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-tac-sled-feet-1.jpg?v=1785269776"},{"product_id":"accu-tac-p-ski-feet","title":"Accu-Tac P-SKI Feet – PSF-2000","description":"\u003cp\u003eThe \u003cb\u003eAccu-Tac P-SKI Feet\u003c\/b\u003e, part number \u003cb\u003ePSF-2000\u003c\/b\u003e, is a pair of ski feet for Accu-Tac wide-stance bipods, with a 0.250″ × 3.200″ (6.4 × 81 mm) contact surface and a pair weight of 4.4 oz \/ 125 g.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eP-SKI feet are the wide-stance answer to a bench: a long, flat runner under each leg so the rifle slides straight back instead of digging in. Accu-Tac lists them for the WB, FC, HD-50 and LP-50 models — the \u003ca href=\"\/products\/accu-tac-wb-5-picatinny-qd-bipod-black\"\u003eAccu-Tac WB-5 Picatinny QD bipod\u003c\/a\u003e, \u003ca href=\"\/products\/accu-tac-fc-5-g2-f-class-arca-spec-qd-bipod-black\"\u003eAccu-Tac FC-5 G2 F-Class Arca-Spec QD bipod\u003c\/a\u003e, \u003ca href=\"\/products\/accu-tac-hd-50-picatinny-bipod-black\"\u003eAccu-Tac HD-50 Picatinny bipod\u003c\/a\u003e and \u003ca href=\"\/products\/accu-tac-lp-50-arca-spec-qd-bipod-black\"\u003eAccu-Tac LP-50 Arca-Spec QD bipod\u003c\/a\u003e among them. They are also stocked as the \u003ca href=\"\/products\/accu-tac-p-ski-feet-flat-dark-earth\"\u003eAccu-Tac P-SKI Feet in Flat Dark Earth\u003c\/a\u003e. For soft ground fit the \u003ca href=\"\/products\/accu-tac-g2-spiked-feet-set\"\u003eAccu-Tac G2 Spiked Feet Set\u003c\/a\u003e instead. Compare \u003ca href=\"\/collections\/f-class-benchrest-bipods\"\u003ethe F-Class and benchrest bipod range\u003c\/a\u003e and \u003ca href=\"\/collections\/bipod-accessories\"\u003eall bipod feet and adapters\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eF-Class and benchrest competition from a firing point\u003c\/li\u003e\n\u003cli\u003eLong-range target rifle shot from a bench\u003c\/li\u003e\n\u003cli\u003eLoad development where the rifle must return to the same place each shot\u003c\/li\u003e\n\u003cli\u003eWide-stance Accu-Tac bipods used on hard surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose:\u003c\/b\u003e Long ski runners let a wide-stance bipod slide straight back under recoil\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eContact surface:\u003c\/b\u003e 0.250″ × 3.200″ (6.4 × 81 mm) per foot\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatibility:\u003c\/b\u003e Accu-Tac wide-stance bipods: WB, FC, HD-50 and LP-50 models\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction:\u003c\/b\u003e 6061 aluminium alloy with steel hardware\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish:\u003c\/b\u003e Type III MIL-SPEC hard-anodise\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eColour:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWeight:\u003c\/b\u003e 4.4 oz \/ 125 g per pair\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterials\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e6061 aluminium alloy, steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFinish\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eType III hard-anodise (black)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSki Surface Dimensions\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e0.250″ × 3.200″ (6.4 × 81 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eWeight (pair)\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e4.4 oz \/ 125 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColour\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFlat black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eCompatibility\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eWide-stance bipods: WB, FC, HD-50, LP-50 models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAccu-Tac (USA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePSF-2000 \/ PSF-2000 \/ 858520006411\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePair of Accu-Tac P-SKI Feet\u003c\/li\u003e\n\u003cli\u003eMounting hardware (pre-installed for bolt-on bipod models)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eCovered by the Accu-Tac Limited Warranty against defects in materials and workmanship.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eEvery order is dispatched tracked from our UK warehouse, so there are no import duties or customs surprises, and you are backed by UK-based aftersales support from our team.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich bipods do the Accu-Tac P-SKI Feet fit?\u003c\/b\u003e\u003cbr\u003eAccu-Tac lists the P-SKI Feet for its wide-stance bipods: the WB, FC, HD-50 and LP-50 models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat are the Accu-Tac P-SKI Feet for?\u003c\/b\u003e\u003cbr\u003eThe long flat runners spread the load on a bench or firing point so the rifle slides straight back under recoil rather than digging in and hopping.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow big is the contact surface on the Accu-Tac P-SKI Feet?\u003c\/b\u003e\u003cbr\u003eEach ski measures 0.250″ × 3.200″, or 6.4 × 81 mm.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow much do the Accu-Tac P-SKI Feet weigh?\u003c\/b\u003e\u003cbr\u003eThe pair weighs 4.4 oz \/ 125 g.\u003c\/p\u003e","brand":"Accu-Tac","offers":[{"title":"Default Title","offer_id":58307899097462,"sku":"PSF-2000","price":123.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-tac-p-ski-feet-1.jpg?v=1785269582"},{"product_id":"atlas-bipod-bt80-m-lok-flush-cup-rail","title":"Atlas Bipod BT80 M-LOK Flush Cup Rail","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT80 M-LOK Flush Cup Rail\u003c\/b\u003e, part number BT80 from B\u0026amp;T Industries, adds a MIL-STD-1913 Picatinny rail section with integrated flush cup sling sockets to any M-LOK compatible handguard, forend or buttstock. It gives bipod mounting and QD sling attachment in a single fitting.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eIf you only need the rail, the shorter \u003ca href=\"\/products\/atlas-bipod-bt73-m-lok-picatinny-rail\"\u003eAtlas BT73 M-LOK Picatinny rail\u003c\/a\u003e is the simpler fitting. If you run an NC (No Clamp) Atlas bipod, the \u003ca href=\"\/products\/atlas-bipod-bt70-m-lok-adaptor\"\u003eAtlas BT70 M-LOK adaptor\u003c\/a\u003e mounts it straight into the M-LOK slot with no rail. The flush cup stud fitting itself is the \u003ca href=\"\/products\/bt-industries-bt54-flush-cup-stud\"\u003eB\u0026amp;T BT54 flush cup stud\u003c\/a\u003e. Bipods to go on it are in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eM-LOK rifles running push-button QD sling swivels\u003c\/li\u003e\n\u003cli\u003ePractical and service rifle builds where sling and bipod share a forend\u003c\/li\u003e\n\u003cli\u003eStalking rifles carried on a sling and shot off a bipod\u003c\/li\u003e\n\u003cli\u003eCleaner setups with fewer separate fittings\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e M-LOK to MIL-STD-1913 Picatinny rail with integrated flush cups\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e M-LOK compatible hand guards, forends and buttstocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSling:\u003c\/b\u003e Flush cup sockets accept push-button QD sling swivels and sit flush so nothing snags\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTakes:\u003c\/b\u003e Two-screw and ADM lever-mount Atlas bipods, and Picatinny monopods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM-LOK to 1913 Picatinny rail with flush cups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM-LOK compatible hand guards, forends and buttstocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSling Interface\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFlush cup sockets for push-button QD swivels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAccepts\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAny MIL-STD-1913 Picatinny bipod or monopod mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT80 \/ BT80 \/ 810040220760\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT80 M-LOK flush cup rail with fixings\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas rail is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat are the flush cups on the Atlas BT80 for?\u003c\/b\u003e\u003cbr\u003eThe flush cups accept push-button QD sling swivels and sit flush with the rail, so nothing protrudes to snag when the sling is removed.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich bipods will fit the Atlas BT80?\u003c\/b\u003e\u003cbr\u003eAny bipod with a standard MIL-STD-1913 Picatinny clamp will fit, including two-screw Atlas models, ADM lever models and Accu-Shot Precision Rail Monopods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the Atlas BT80 KeyMod compatible?\u003c\/b\u003e\u003cbr\u003eNo — the BT80 is an M-LOK fitting only and will not mount to a KeyMod handguard.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShould I choose the BT80 or the BT73?\u003c\/b\u003e\u003cbr\u003eChoose the BT80 if you want sling attachment and bipod mounting in one fitting, and the BT73 if you only need a short Picatinny rail section without flush cups.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT80 M-LOK flush cup rail with its fixings.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307902603638,"sku":"BT80","price":44.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt80-m-lok-flush-cup-rail-1.jpg?v=1785269727"},{"product_id":"atlas-bipod-bt19-accuracy-international-spigot-aais","title":"Atlas Bipod BT19 Accuracy International Spigot (AAIS)","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT19 Accuracy International Spigot (AAIS)\u003c\/b\u003e, part number BT19 from B\u0026amp;T Industries, lets any NC (No Clamp) Atlas bipod mount directly to the Accuracy International spigot system — the factory forend interface on AI rifles. It keeps the AI forend as the manufacturer built it, with no rail bolted on.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT19 mounts NC bipods only. To run a two-screw or ADM lever Atlas bipod on the AI spigot, add the \u003ca href=\"\/products\/atlas-bipod-bt20-aais-1913-rail-set\"\u003eBT20 AAIS 1913 rail set\u003c\/a\u003e, or take the ready-made quick-detach route with the \u003ca href=\"\/products\/atlas-bipod-bt43-leveraged-rail\"\u003eAtlas BT43 leveraged rail\u003c\/a\u003e, which is the BT20-B bottom rail supplied with an ADM-170-S lever installed. For M-LOK handguards instead of an AI spigot, use the \u003ca href=\"\/products\/atlas-bipod-bt70-m-lok-adaptor\"\u003eAtlas BT70 M-LOK adaptor\u003c\/a\u003e. NC bipods are in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAccuracy International rifles with the factory spigot forend\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting on an AI platform\u003c\/li\u003e\n\u003cli\u003eTarget, F-Class and practical rifle with an AI-stocked rifle\u003c\/li\u003e\n\u003cli\u003eKeeping the AI forend clean and free of bolt-on rails\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Accuracy International spigot mount (AAIS) for Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e All NC (No Clamp) Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible bipods:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt10-nc-v8-no-clamp\"\u003eBT10-NC V8\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt46-nc-psr-no-clamp\"\u003eBT46-NC PSR\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt47-nc-psr-tall-no-clamp\"\u003eBT47-NC PSR Tall\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt65-nc-cal-no-clamp\"\u003eBT65-NC CAL\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt69-nc-cal-tall-no-clamp\"\u003eBT69-NC CAL Tall\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt72-nc-super-cal-no-clamp\"\u003eBT72-NC Super CAL\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt35-nc-5-h-no-clamp\"\u003eBT35-NC 5-H\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRail option:\u003c\/b\u003e Works with the \u003ca href=\"\/products\/atlas-bipod-bt20-aais-1913-rail-set\"\u003eBT20\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt20-b-aais-bottom-rail\"\u003eBT20-B\u003c\/a\u003e AAIS rails to add 1913 mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAccuracy International spigot mount (AAIS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAll NC (No Clamp) Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRail Options\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT20 AAIS 1913 rail set; BT20-B AAIS bottom rail; BT43 leveraged rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT19 \/ BT19 \/ 810040220418\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT19 AAIS spigot\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas mount is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods fit the BT19 spigot?\u003c\/b\u003e\u003cbr\u003eThe BT19 fits every NC (No Clamp) Atlas bipod, which is the BT10-NC, BT46-NC, BT47-NC, BT35-NC, BT65-NC, BT69-NC and BT72-NC.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill a two-screw or ADM lever Atlas bipod fit the BT19?\u003c\/b\u003e\u003cbr\u003eNot directly — those bipods carry a Picatinny clamp, so you need the BT20 AAIS rail set to add 1913 rails to the spigot, after which two-screw and lever-mount bipods can be used.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich rifles does the BT19 suit?\u003c\/b\u003e\u003cbr\u003eThe BT19 is for Accuracy International rifles that use the spigot forend interface, so check your specific model's forend before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs there a quick-detach version already built?\u003c\/b\u003e\u003cbr\u003eYes — the BT43 leveraged rail is the BT20-B bottom rail supplied with an ADM-170-S lever already installed, which gives a ready-made quick-detach interface on a spigot-equipped rifle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT19 Accuracy International spigot (AAIS).\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307902636406,"sku":"BT19","price":79.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt19-accuracy-international-spigot-aais-1.jpg?v=1785269762"},{"product_id":"atlas-bipod-bt75-raider-cleat-feet-for-5-h-super-cal","title":"Atlas Bipod BT75 Raider Cleat Feet for 5-H \u0026 Super CAL","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT75 Raider Cleat Feet for 5-H and Super CAL\u003c\/b\u003e, part number BT75 from B\u0026amp;T Industries, are one-piece machined stainless steel cleat feet sized for the 5-H and Super CAL series Atlas bipods. The aggressive cleat profile bites into barricades, rock and hard ground. Sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT75 is the heavyweight cleat foot. On the same 5-H and Super CAL bipods, the \u003ca href=\"\/products\/atlas-bipod-bt66-5-h-super-cal-bas-ski-feet\"\u003eBT66 BAS ski feet\u003c\/a\u003e spread the load on soft ground and the \u003ca href=\"\/products\/atlas-bipod-bt55-5-h-super-cal-standard-rubber-feet\"\u003eBT55 standard rubber feet\u003c\/a\u003e are the factory item. If your bipod is a V8, PSR or CAL model, the smaller \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider cleat feet\u003c\/a\u003e are the correct part instead. Everything that fits an Atlas is in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy F-Class, benchrest and long-range rifles on hard firing points\u003c\/li\u003e\n\u003cli\u003ePractical and service rifle stages shot off barricades and props\u003c\/li\u003e\n\u003cli\u003eHill shooting on rock, scree and frozen ground\u003c\/li\u003e\n\u003cli\u003eLarge-calibre rifles where recoil would skate a rubber foot\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Raider cleat feet for 5-H and Super CAL, sold as a pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e One-piece machined stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt35-nc-5-h-no-clamp\"\u003eAtlas 5-H\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt72-super-cal-with-2-screw-mount\"\u003eAtlas Super CAL\u003c\/a\u003e bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrip:\u003c\/b\u003e Aggressive cleat profile for barricades, rock and hard ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNot for:\u003c\/b\u003e V8, PSR and CAL bipods, which take the BT74 instead\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRaider cleat feet, pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eStainless steel, one-piece machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5-H and Super CAL Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDoes Not Fit\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eV8, PSR and CAL Atlas bipods (use BT74)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT75 \/ BT75 \/ 810040220739\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2× Atlas BT75 Raider cleat feet for 5-H and Super CAL (one pair)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThese Atlas feet are dispatched tracked from our UK warehouse — no import duties and no customs delays — and are backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods do the BT75 Raider cleat feet fit?\u003c\/b\u003e\u003cbr\u003eThe BT75 Raider cleat feet fit the 5-H and Super CAL series Atlas bipods, which includes the BT35 and BT72 in all of their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT75 fit a V8, PSR or CAL Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNo — those bipods use a smaller foot and need the BT74 Raider cleat feet, which are a separate part; the BT75 and BT74 are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow many feet are in a set?\u003c\/b\u003e\u003cbr\u003eThe BT75 is sold as a pair, which is one complete set for a single bipod.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat are cleat feet best used on?\u003c\/b\u003e\u003cbr\u003eCleat feet are at their best on hard surfaces such as barricades, rock, concrete and frozen ground, where the stainless steel cleats bite rather than slide under recoil.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains two Atlas BT75 Raider cleat feet for 5-H and Super CAL bipods, which is one pair.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904012662,"sku":"BT75","price":94.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt75-raider-cleat-feet-for-5-h-super-cal-1.jpg?v=1785269462"},{"product_id":"atlas-bipod-bt74-raider-cleat-feet","title":"Atlas Bipod BT74 Raider Cleat Feet","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT74 Raider Cleat Feet\u003c\/b\u003e, part number BT74 from B\u0026amp;T Industries, are one-piece machined stainless steel cleat feet for V8, PSR and CAL model Atlas bipods. The aggressive cleat profile bites into barricades, rock and hard ground where a rubber foot would slide. Sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eAtlas feet come in three characters. The BT74 Raider cleats grip hard surfaces; the \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 quick-change ski feet\u003c\/a\u003e spread the load on soft ground; and the \u003ca href=\"\/products\/atlas-bipod-bt32-standard-rubber-feet\"\u003eBT32 standard rubber feet\u003c\/a\u003e are the factory item. All three fit the same V8, PSR and CAL bipods. If your bipod is a 5-H or Super CAL, you need the larger \u003ca href=\"\/products\/atlas-bipod-bt75-raider-cleat-feet-for-5-h-super-cal\"\u003eBT75 Raider cleat feet for 5-H and Super CAL\u003c\/a\u003e instead. More options are in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePractical and service rifle stages shot off barricades and props\u003c\/li\u003e\n\u003cli\u003eHill stalking on rock, scree and frozen ground\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting from timber and concrete rests\u003c\/li\u003e\n\u003cli\u003eAny surface where a rubber foot skates under recoil\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Raider cleat feet, sold as a pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e One-piece machined stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e V8, PSR and CAL model Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrip:\u003c\/b\u003e Aggressive cleat profile for barricades, rock and hard ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNot for:\u003c\/b\u003e 5-H and Super CAL bipods, which take the BT75 instead\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRaider cleat feet, pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eStainless steel, one-piece machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eV8, PSR and CAL model Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDoes Not Fit\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5-H and Super CAL Atlas bipods (use BT75)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT74 \/ BT74 \/ 810040220722\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2× Atlas BT74 Raider cleat feet (one pair)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThese Atlas feet are dispatched tracked from our UK warehouse — no import duties and no customs delays — and are backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods do the BT74 Raider cleat feet fit?\u003c\/b\u003e\u003cbr\u003eThe BT74 Raider cleat feet fit the V8, PSR and CAL model Atlas bipods, which includes the BT10, BT46, BT47, BT65 and BT69 in all of their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT74 fit a 5-H or Super CAL Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNo — the 5-H and Super CAL bipods use a larger foot and need the BT75 Raider cleat feet, which are a separate part.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow many feet are in a set?\u003c\/b\u003e\u003cbr\u003eThe BT74 is sold as a pair, which is one complete set for a single bipod.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhen should I choose cleat feet over ski feet?\u003c\/b\u003e\u003cbr\u003eCleat feet are the better choice on hard surfaces such as barricades, rock and frozen ground where grip matters, while ski feet spread the load and track more smoothly on soft or loose ground.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains two Atlas BT74 Raider cleat feet, which is one pair.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904078198,"sku":"BT74","price":74.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt74-raider-cleat-feet-1.jpg?v=1785271664"},{"product_id":"atlas-bipod-bt73-m-lok-picatinny-rail","title":"Atlas Bipod BT73 M-LOK Picatinny Rail","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT73 M-LOK Picatinny Rail\u003c\/b\u003e, part number BT73 from B\u0026amp;T Industries, adds a short MIL-STD-1913 Picatinny rail section to any M-LOK compatible handguard, forend or buttstock. It is the simple way to run a two-screw or ADM lever-mount Atlas bipod on an M-LOK rifle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT73 gives you a rail; the \u003ca href=\"\/products\/atlas-bipod-bt70-m-lok-adaptor\"\u003eAtlas BT70 M-LOK adaptor\u003c\/a\u003e instead bolts an NC (No Clamp) Atlas bipod straight into the M-LOK slot with no rail at all, which is lower and lighter. If you also want flush cup sling sockets in the same fitting, the \u003ca href=\"\/products\/atlas-bipod-bt80-m-lok-flush-cup-rail\"\u003eAtlas BT80 M-LOK flush cup rail\u003c\/a\u003e combines both. Bipods to go on it are in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePractical and service rifle builds on M-LOK handguards\u003c\/li\u003e\n\u003cli\u003eAdding Atlas bipod mounting to an AR-pattern or chassis rifle\u003c\/li\u003e\n\u003cli\u003eNight fox and vermin rifles built on M-LOK forends\u003c\/li\u003e\n\u003cli\u003eShooters who want a Picatinny interface rather than a direct M-LOK mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e M-LOK to MIL-STD-1913 Picatinny rail section\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e M-LOK compatible hand guards, forends and buttstocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTakes:\u003c\/b\u003e Two-screw and ADM lever-mount Atlas bipods, and Picatinny monopods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAlternative:\u003c\/b\u003e The BT70 M-LOK adaptor mounts an NC Atlas bipod directly, without a rail\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM-LOK to 1913 Picatinny rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM-LOK compatible hand guards, forends and buttstocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAccepts\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAny MIL-STD-1913 Picatinny bipod or monopod mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT73 \/ BT73 \/ 810040220715\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT73 M-LOK rail with fixings\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas rail is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the Atlas BT73 M-LOK rail do?\u003c\/b\u003e\u003cbr\u003eThe BT73 bolts into an M-LOK slot and provides a short MIL-STD-1913 Picatinny rail section, so a Picatinny-mount bipod or monopod can be fitted to an M-LOK handguard, forend or buttstock.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShould I choose the BT73 rail or the BT70 M-LOK adaptor?\u003c\/b\u003e\u003cbr\u003eChoose the BT73 if your bipod has a two-screw or ADM lever Picatinny clamp, and choose the BT70 M-LOK adaptor if you have an NC (No Clamp) Atlas bipod, because the BT70 mounts it directly into the M-LOK slot without a rail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the Atlas BT73 KeyMod compatible?\u003c\/b\u003e\u003cbr\u003eNo — the BT73 is an M-LOK fitting only and will not mount to a KeyMod handguard.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich bipods will fit the Atlas BT73?\u003c\/b\u003e\u003cbr\u003eAny bipod with a standard MIL-STD-1913 Picatinny clamp will fit, including the two-screw Atlas models such as the BT10 and BT65 and the ADM lever models such as the BT46-LW17.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT73 M-LOK rail with its fixings.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904110966,"sku":"BT73","price":34.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt73-m-lok-picatinny-rail-1.jpg?v=1785269431"},{"product_id":"atlas-bipod-bt1517-rail-mounting-fastener-set","title":"Atlas Bipod BT1517 Rail Mounting Fastener Set","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT1517 Rail Mounting Fastener Set\u003c\/b\u003e, part number BT1517 from B\u0026amp;T Industries, is the fixing kit for mounting B\u0026amp;T's 1913 rails. It contains two 10-32 T-nuts and two 10-32 × ¾ inch (19 mm) button head screws, and is compatible with both the BT15 and BT17 rails.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis is the fastener set, not a rail. The rails themselves are the \u003ca href=\"\/products\/atlas-bipod-bt15-3-35-inch-picatinny-rail\"\u003eAtlas BT15 3.35 inch radius-back Picatinny rail\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt17-4-inch-1913-picatinny-rail\"\u003eAtlas BT17 4 inch flat-back Picatinny rail\u003c\/a\u003e. If you are replacing nuts for the AFAR rail kit rather than these rails, the correct part is the \u003ca href=\"\/products\/atlas-bipod-bt28-n-afar-rail-nuts\"\u003eBT28-N AFAR rail nuts\u003c\/a\u003e. Everything else is in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFitting a new BT15 or BT17 rail to a stock\u003c\/li\u003e\n\u003cli\u003eReplacing fixings lost during a stock refinish or rebuild\u003c\/li\u003e\n\u003cli\u003eGunsmiths and stockers building rail mounting into a rifle\u003c\/li\u003e\n\u003cli\u003eKeeping a spare set with the rail\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Rail mounting fastener set\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eContents:\u003c\/b\u003e 2× 10-32 T-nuts and 2× 10-32 × ¾ inch (19 mm) button head screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e BT15 and BT17 Atlas rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread:\u003c\/b\u003e 10-32\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRail mounting fastener set\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eContents\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2× 10-32 T-nuts, 2× 10-32 × ¾ inch (19 mm) button head screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas BT15 and BT17 rails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eThread\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e10-32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT1517 \/ BT1517 \/ 810040220401\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2× 10-32 T-nuts\u003c\/li\u003e\n\u003cli\u003e2× 10-32 × ¾ inch (19 mm) button head screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis fastener set is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas rails does the BT1517 fastener set fit?\u003c\/b\u003e\u003cbr\u003eThe BT1517 set fits both the Atlas BT15 3.35 inch rail and the Atlas BT17 4 inch rail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the BT1517 set contain?\u003c\/b\u003e\u003cbr\u003eThe BT1517 set contains two 10-32 T-nuts and two 10-32 × ¾ inch (19 mm) button head screws.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDo the Atlas BT15 and BT17 rails come with fixings?\u003c\/b\u003e\u003cbr\u003eThe BT1517 fastener set is listed and sold as a separate item, so order it alongside the rail if you need the T-nuts and screws.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the BT1517 the right part for the AFAR rail kit?\u003c\/b\u003e\u003cbr\u003eNo — the AFAR rail kit uses the BT28-N AFAR rail nuts, which are a different part from the BT1517 set.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains two 10-32 T-nuts and two 10-32 × ¾ inch (19 mm) button head screws.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904143734,"sku":"BT1517","price":6.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt1517-rail-mounting-fastener-set-1.jpg?v=1785269833"},{"product_id":"atlas-bipod-bt30-b-bipod-pouch-black","title":"Atlas Bipod BT30-B Bipod Pouch Black","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT30-B Bipod Pouch in Black\u003c\/b\u003e, part number BT30-B from B\u0026amp;T Industries, is the genuine Atlas carry pouch for V8, standard-height PSR and CAL model bipods. It is cut to the Atlas footprint exactly, so the bipod goes in folded and comes out without a fight.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe same pouch is stocked in three colours: this Black version, the \u003ca href=\"\/products\/atlas-bipod-bt30-c-bipod-pouch-coyote-brown\"\u003eAtlas BT30-C bipod pouch in Coyote Brown\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt30-r-bipod-pouch-ranger-green\"\u003eAtlas BT30-R bipod pouch in Ranger Green\u003c\/a\u003e. If your bipod is a Tall model, the \u003ca href=\"\/products\/atlas-bipod-bt30-tall-bipod-pouch-coyote-brown\"\u003eBT30 tall Atlas bipod pouch\u003c\/a\u003e covers both standard and tall heights, and for a 5-H or Super CAL the \u003ca href=\"\/products\/atlas-bipod-bt30-s5-large-bipod-pouch\"\u003eBT30-S5 large Atlas bipod pouch\u003c\/a\u003e is the correct size. Browse the rest in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeer stalkers carrying the bipod on the belt or in a rucksack\u003c\/li\u003e\n\u003cli\u003eKeeping a quick-detach bipod protected between stages\u003c\/li\u003e\n\u003cli\u003eTarget and F-Class shooters transporting kit to the firing point\u003c\/li\u003e\n\u003cli\u003eAnyone who removes the bipod for the walk in\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Atlas bipod carry pouch\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eColour:\u003c\/b\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e V8, standard-height PSR and CAL model Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFit:\u003c\/b\u003e Made to the Atlas footprint by B\u0026amp;T Industries rather than a generic pouch\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBipod pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColour\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eV8, standard-height PSR and CAL Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOther Sizes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30 tall pouch (standard and tall); BT30-S5 large pouch (5-H and Super CAL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-B \/ BT30-B \/ 810040220470\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT30-B bipod pouch in Black\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas pouch is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods does the BT30-B pouch fit?\u003c\/b\u003e\u003cbr\u003eThe BT30-B pouch fits the V8, standard-height PSR and CAL model Atlas bipods, which includes the BT10, BT46, BT65 and their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT30-B fit a Tall Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNo — the Tall models such as the BT47 PSR Tall and BT69 CAL Tall need the BT30 tall pouch, which is cut to take both standard and tall height bipods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich pouch do I need for a 5-H or Super CAL bipod?\u003c\/b\u003e\u003cbr\u003eThe BT30-S5 large Atlas bipod pouch is the correct size for the 5-H and Super CAL bipods, because the standard BT30-B is cut for the smaller V8, PSR and CAL models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat colours is this Atlas pouch available in?\u003c\/b\u003e\u003cbr\u003eThe standard-height Atlas pouch is stocked in Black as the BT30-B, Coyote Brown as the BT30-C and Ranger Green as the BT30-R.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT30-B bipod pouch in Black.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904274806,"sku":"BT30-B","price":59.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt30-b-bipod-pouch-black-1.jpg?v=1785300028"},{"product_id":"atlas-bipod-bt17-4-inch-1913-picatinny-rail","title":"Atlas Bipod BT17 4 Inch 1913 Picatinny Rail","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT17 4 Inch 1913 Picatinny Rail\u003c\/b\u003e, part number BT17 from B\u0026amp;T Industries, is a flush cup MIL-STD-1913 rail with a flat back, 4 inches (102 mm) long. It accommodates stock hole patterns with a centre-to-centre spacing of 2.2 to 3.5 inches (56–89 mm), giving bipod and monopod rail mounting on flat-bottomed forends.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe flat back is what separates the BT17 from the radiused \u003ca href=\"\/products\/atlas-bipod-bt15-3-35-inch-picatinny-rail\"\u003eAtlas BT15 3.35 inch Picatinny rail\u003c\/a\u003e, which suits rounded forends and a tighter hole spacing. For short stocks, the \u003ca href=\"\/products\/atlas-bipod-bt34-2-05-inch-1913-rail\"\u003eAtlas BT34 2.05 inch radius-back rail\u003c\/a\u003e and the slotted \u003ca href=\"\/products\/atlas-bipod-bt49-2-05-inch-adjustable-rail\"\u003eAtlas BT49 2.05 inch adjustable rail\u003c\/a\u003e are the compact options. Fixings are the \u003ca href=\"\/products\/atlas-bipod-bt1517-rail-mounting-fastener-set\"\u003eBT1517 rail mounting fastener set\u003c\/a\u003e. See the rest in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTarget, F-Class and benchrest stocks with a flat-bottomed forend\u003c\/li\u003e\n\u003cli\u003eAdding Picatinny mounting for an Atlas bipod to a rifle that has none\u003c\/li\u003e\n\u003cli\u003eStalking rifles being converted to rail-mounted support\u003c\/li\u003e\n\u003cli\u003eStocks with existing holes spaced 2.2 to 3.5 inches (56–89 mm) apart\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e MIL-STD-1913 Picatinny rail with flush cups, flat back\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength:\u003c\/b\u003e 4 inches (102 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHole spacing:\u003c\/b\u003e 2.2 to 3.5 inches (56–89 mm) centre-to-centre, approximate\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBack profile:\u003c\/b\u003e Flat, for flat-bottomed forends\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFixings:\u003c\/b\u003e The \u003ca href=\"\/products\/atlas-bipod-bt1517-rail-mounting-fastener-set\"\u003eBT1517 fastener set\u003c\/a\u003e covers both the BT15 and BT17\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1913 Picatinny rail, flush cup, flat back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLength\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e4 inches (102 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHole Spacing\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 to 3.5 inches (56–89 mm) centre-to-centre approx.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFixings\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT1517 rail mounting fastener set (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT17 \/ BT17 \/ 810040220241\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT17 4 inch (102 mm) Picatinny rail\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas rail is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat hole spacing does the Atlas BT17 rail suit?\u003c\/b\u003e\u003cbr\u003eThe BT17 accommodates stock hole patterns with a centre-to-centre spacing of approximately 2.2 to 3.5 inches (56–89 mm).\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the difference between the Atlas BT17 and the BT15?\u003c\/b\u003e\u003cbr\u003eThe BT17 is 4 inches (102 mm) long with a flat back for flat-bottomed forends, while the BT15 is 3.35 inches (85 mm) long with a radiused back for rounded forends and a tighter hole spacing.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich bipods will mount to the Atlas BT17 rail?\u003c\/b\u003e\u003cbr\u003eAny bipod or monopod with a MIL-STD-1913 Picatinny interface will mount to it, including two-screw and ADM lever Atlas bipods and the Accu-Shot Precision Rail Monopods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre the mounting screws included with the Atlas BT17?\u003c\/b\u003e\u003cbr\u003eThe fixings are sold separately as the BT1517 rail mounting fastener set, which contains two 10-32 T-nuts and two 10-32 × ¾ inch (19 mm) button head screws and fits both the BT15 and BT17.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT17 4 inch (102 mm) flush cup Picatinny rail.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904438646,"sku":"BT17","price":34.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt17-4-inch-1913-picatinny-rail-1.jpg?v=1785269404"},{"product_id":"atlas-bipod-bt15-3-35-inch-picatinny-rail","title":"Atlas Bipod BT15 3.35 Inch Picatinny Rail","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT15 3.35 Inch Picatinny Rail\u003c\/b\u003e, part number BT15 from B\u0026amp;T Industries, is a flush cup MIL-STD-1913 rail with a radiused back, 3.35 inches (85 mm) long. It accommodates stock hole patterns with a centre-to-centre spacing of 1.76 to 2.78 inches (45–71 mm), and is the classic way to add bipod and monopod rail mounting to a conventional stock.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe radiused back is what suits the BT15 to a rounded forend; the \u003ca href=\"\/products\/atlas-bipod-bt17-4-inch-1913-picatinny-rail\"\u003eAtlas BT17 4 inch flat-back Picatinny rail\u003c\/a\u003e is the flat-bottomed equivalent and covers a wider hole spacing. For shorter stocks, the \u003ca href=\"\/products\/atlas-bipod-bt34-2-05-inch-1913-rail\"\u003eAtlas BT34 2.05 inch radius-back rail\u003c\/a\u003e and the slotted \u003ca href=\"\/products\/atlas-bipod-bt49-2-05-inch-adjustable-rail\"\u003eAtlas BT49 2.05 inch adjustable rail\u003c\/a\u003e cover tighter spacings. Fixings are the \u003ca href=\"\/products\/atlas-bipod-bt1517-rail-mounting-fastener-set\"\u003eBT1517 rail mounting fastener set\u003c\/a\u003e. More options in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConventional wooden and synthetic stalking stocks with a rounded forend\u003c\/li\u003e\n\u003cli\u003eAdding Picatinny mounting for an Atlas bipod to a rifle that has none\u003c\/li\u003e\n\u003cli\u003eTarget and F-Class rifles being converted to rail-mounted support\u003c\/li\u003e\n\u003cli\u003eStocks with existing holes spaced 1.76 to 2.78 inches (45–71 mm) apart\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e MIL-STD-1913 Picatinny rail with flush cups, radius back\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength:\u003c\/b\u003e 3.35 inches (85 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHole spacing:\u003c\/b\u003e 1.76 to 2.78 inches (45–71 mm) centre-to-centre, approximate\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBack profile:\u003c\/b\u003e Radiused, for rounded forends\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFixings:\u003c\/b\u003e The \u003ca href=\"\/products\/atlas-bipod-bt1517-rail-mounting-fastener-set\"\u003eBT1517 fastener set\u003c\/a\u003e covers both the BT15 and BT17\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1913 Picatinny rail, flush cup, radius back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLength\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3.35 inches (85 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHole Spacing\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.76 to 2.78 inches (45–71 mm) centre-to-centre approx.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFixings\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT1517 rail mounting fastener set (sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT15 \/ BT15 \/ 810040220234\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT15 3.35 inch (85 mm) Picatinny rail\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas rail is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat hole spacing does the Atlas BT15 rail suit?\u003c\/b\u003e\u003cbr\u003eThe BT15 accommodates stock hole patterns with a centre-to-centre spacing of approximately 1.76 to 2.78 inches (45–71 mm).\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the difference between the Atlas BT15 and the BT17?\u003c\/b\u003e\u003cbr\u003eThe BT15 is 3.35 inches (85 mm) long with a radiused back for rounded forends, while the BT17 is 4 inches (102 mm) long with a flat back for flat-bottomed forends and covers a wider hole spacing of 2.2 to 3.5 inches (56–89 mm).\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich bipods will mount to the Atlas BT15 rail?\u003c\/b\u003e\u003cbr\u003eAny bipod or monopod with a MIL-STD-1913 Picatinny interface will mount to it, including two-screw and ADM lever Atlas bipods and the Accu-Shot Precision Rail Monopods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre the mounting screws included with the Atlas BT15?\u003c\/b\u003e\u003cbr\u003eThe fixings are sold separately as the BT1517 rail mounting fastener set, which contains two 10-32 T-nuts and two 10-32 × ¾ inch (19 mm) button head screws and covers both the BT15 and BT17.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT15 3.35 inch (85 mm) flush cup Picatinny rail.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904471414,"sku":"BT15","price":34.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt15-3-35-inch-picatinny-rail-1.jpg?v=1785269727"},{"product_id":"atlas-bipod-bt66-5-h-super-cal-bas-ski-feet","title":"Atlas Bipod BT66 5-H \u0026 Super CAL BAS Ski Feet","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT66 5-H and Super CAL BAS Ski Feet\u003c\/b\u003e, part number BT66 from B\u0026amp;T Industries, are machined ski feet developed for the 5-H and Super CAL series Atlas bipods. The ski profile spreads the load of a heavy rifle so the bipod tracks smoothly on soft ground instead of digging in. Sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eOn the same 5-H and Super CAL bipods, the \u003ca href=\"\/products\/atlas-bipod-bt75-raider-cleat-feet-for-5-h-super-cal\"\u003eBT75 Raider cleat feet\u003c\/a\u003e grip hard surfaces and the \u003ca href=\"\/products\/atlas-bipod-bt55-5-h-super-cal-standard-rubber-feet\"\u003eBT55 standard rubber feet\u003c\/a\u003e are the factory item. If your bipod is a V8, PSR or CAL model, the smaller \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 quick-change ski feet\u003c\/a\u003e are the correct part instead. Browse the rest in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeavy F-Class and benchrest rifles that must track straight back under recoil\u003c\/li\u003e\n\u003cli\u003eLong-range shooting on soft ground, peat and ploughed field\u003c\/li\u003e\n\u003cli\u003eDeer stalking with a heavy-barrelled rifle on wet or boggy ground\u003c\/li\u003e\n\u003cli\u003eSand, snow and loose surfaces where a narrow foot sinks\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e BAS ski feet for 5-H and Super CAL, sold as a pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt35-lw17-5-h-with-adm-4103la74-5-h-lever-qd-mount\"\u003eAtlas 5-H\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt72-nc-super-cal-no-clamp\"\u003eAtlas Super CAL\u003c\/a\u003e bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBenefit:\u003c\/b\u003e Spreads the load of a heavy rifle for smooth tracking on soft ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNot for:\u003c\/b\u003e V8, PSR and CAL bipods, which take the BT23 ski feet instead\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBAS ski feet, pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5-H and Super CAL Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDoes Not Fit\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eV8, PSR and CAL Atlas bipods (use BT23)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT66 \/ BT66 \/ 810040220630\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2× Atlas BT66 BAS ski feet (one pair)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThese Atlas feet are dispatched tracked from our UK warehouse — no import duties and no customs delays — and are backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods do the BT66 BAS ski feet fit?\u003c\/b\u003e\u003cbr\u003eThe BT66 BAS ski feet fit the 5-H and Super CAL series Atlas bipods, which includes the BT35 and BT72 in all of their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT66 fit a V8, PSR or CAL Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNo — those bipods take the smaller BT23 quick-change ski feet, and the BT66 and BT23 are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow many feet are in a set?\u003c\/b\u003e\u003cbr\u003eThe BT66 is sold as a pair, which is one complete set for a single bipod.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhy choose ski feet on a heavy rifle?\u003c\/b\u003e\u003cbr\u003eSki feet spread the load across a wider contact area, which stops a heavy rifle digging into soft ground and helps the bipod track straight back under recoil rather than skewing.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains two Atlas BT66 BAS ski feet, which is one pair.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904668022,"sku":"BT66","price":99.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt66-5-h-super-cal-bas-ski-feet-1.jpg?v=1785271775"},{"product_id":"atlas-bipod-bt23-quick-change-ski-feet","title":"Atlas Bipod BT23 Quick Change Ski Feet","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT23 Quick Change Ski Feet\u003c\/b\u003e, part number BT23 from B\u0026amp;T Industries, replace the standard feet on any V8, PSR or CAL model Atlas bipod. The ski profile spreads the load so the bipod tracks smoothly on soft or loose ground instead of digging in, and they fit in seconds with a press of the stainless steel plunger. Sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSki feet are the soft-ground answer. On hard surfaces the \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider stainless steel cleat feet\u003c\/a\u003e grip better, and the \u003ca href=\"\/products\/atlas-bipod-bt32-standard-rubber-feet\"\u003eBT32 standard rubber feet\u003c\/a\u003e are the factory item that came on the bipod. For a 5-H or Super CAL bipod, the equivalent ski foot is the \u003ca href=\"\/products\/atlas-bipod-bt66-5-h-super-cal-bas-ski-feet\"\u003eBT66 BAS ski feet\u003c\/a\u003e. See the full set of options in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeer stalking on soft ground, peat, heather and ploughed field\u003c\/li\u003e\n\u003cli\u003eF-Class and benchrest shooting where the bipod must track straight back\u003c\/li\u003e\n\u003cli\u003eNight fox and vermin control over stubble and pasture\u003c\/li\u003e\n\u003cli\u003eSand, snow and loose surfaces where a narrow foot sinks\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Quick-change ski feet, sold as a pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e V8, PSR and CAL model Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e Quick-change — installed in seconds with the press of a stainless steel plunger\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBenefit:\u003c\/b\u003e Spreads the load for smooth tracking on soft or loose ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNot for:\u003c\/b\u003e 5-H and Super CAL bipods, which take the BT66 BAS ski feet instead\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSki feet, quick change, pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eV8, PSR and CAL model Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFitting\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eStainless steel plunger, tool-free quick change\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDoes Not Fit\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5-H and Super CAL Atlas bipods (use BT66)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT23 \/ BT23 \/ 810040220449\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2× Atlas BT23 quick-change ski feet (one pair)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThese Atlas feet are dispatched tracked from our UK warehouse — no import duties and no customs delays — and are backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods do the BT23 ski feet fit?\u003c\/b\u003e\u003cbr\u003eThe BT23 quick-change ski feet fit the V8, PSR and CAL model Atlas bipods, which includes the BT10, BT46, BT47, BT65 and BT69 in all of their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDo I need tools to change Atlas feet?\u003c\/b\u003e\u003cbr\u003eNo — the BT23 is a quick-change foot and is installed in seconds by pressing the stainless steel plunger, so no tools are required.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT23 fit a 5-H or Super CAL Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNo — the 5-H and Super CAL bipods take the larger BT66 BAS ski feet, and the two parts are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhen should I choose ski feet over cleat feet?\u003c\/b\u003e\u003cbr\u003eSki feet are the better choice on soft or loose ground such as peat, heather, sand and snow, because they spread the load and let the bipod track smoothly, while cleat feet suit hard surfaces where grip matters more.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains two Atlas BT23 quick-change ski feet, which is one pair.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904766326,"sku":"BT23","price":59.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt23-quick-change-ski-feet-1.jpg?v=1785271588"},{"product_id":"atlas-bipod-bt70-m-lok-adaptor","title":"Atlas Bipod BT70 M-LOK Adaptor","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT70 M-LOK Adaptor\u003c\/b\u003e, part number BT70 from B\u0026amp;T Industries, is the interface between NC (No Clamp) Atlas bipods and M-LOK handguards. Bolt it straight into an M-LOK slot and a BT10-NC, BT46-NC, BT47-NC, BT35-NC, BT65-NC, BT69-NC or BT72-NC mounts directly, with no Picatinny rail needed.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT70 is the low, light route: no rail, bipod straight onto the handguard. If your bipod has a two-screw or ADM lever Picatinny clamp instead, you need a rail — the \u003ca href=\"\/products\/atlas-bipod-bt73-m-lok-picatinny-rail\"\u003eAtlas BT73 M-LOK Picatinny rail\u003c\/a\u003e, or the \u003ca href=\"\/products\/atlas-bipod-bt80-m-lok-flush-cup-rail\"\u003eAtlas BT80 M-LOK flush cup rail\u003c\/a\u003e if you also want QD sling sockets. The other NC interfaces are the \u003ca href=\"\/products\/atlas-bipod-bt19-accuracy-international-spigot-aais\"\u003eBT19 Accuracy International spigot\u003c\/a\u003e and any 17S-size lever. NC bipods are listed in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePractical and service rifle builds on M-LOK handguards\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style rifles where a low bipod mounting height matters\u003c\/li\u003e\n\u003cli\u003eNight fox and vermin rifles built on M-LOK forends\u003c\/li\u003e\n\u003cli\u003eAnyone who bought an NC Atlas bipod and needs the mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e M-LOK adaptor for NC (No Clamp) Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e All NC (No Clamp) Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting:\u003c\/b\u003e Bolts directly into an M-LOK slot — no Picatinny rail required\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatible bipods:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt10-nc-v8-no-clamp\"\u003eBT10-NC V8\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt46-nc-psr-no-clamp\"\u003eBT46-NC PSR\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt47-nc-psr-tall-no-clamp\"\u003eBT47-NC PSR Tall\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt65-nc-cal-no-clamp\"\u003eBT65-NC CAL\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt69-nc-cal-tall-no-clamp\"\u003eBT69-NC CAL Tall\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt72-nc-super-cal-no-clamp\"\u003eBT72-NC Super CAL\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt35-nc-5-h-no-clamp\"\u003eBT35-NC 5-H\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM-LOK adaptor for NC Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAll NC (No Clamp) Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMounting\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eDirect into an M-LOK slot, no Picatinny rail required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT70 \/ BT70 \/ 810040220647\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT70 M-LOK adaptor with fixings\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas adaptor is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods fit the BT70 M-LOK adaptor?\u003c\/b\u003e\u003cbr\u003eThe BT70 fits every NC (No Clamp) Atlas bipod, which is the BT10-NC, BT46-NC, BT47-NC, BT35-NC, BT65-NC, BT69-NC and BT72-NC.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT70 work with a two-screw or ADM lever Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNo — those bipods already carry a Picatinny clamp, so they need a rail such as the BT73 M-LOK Picatinny rail rather than the BT70 adaptor.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the BT70 need a Picatinny rail on the handguard?\u003c\/b\u003e\u003cbr\u003eNo — the BT70 bolts directly into an M-LOK slot, which is what makes it a lower and lighter mounting than adding a rail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the Atlas BT70 KeyMod compatible?\u003c\/b\u003e\u003cbr\u003eNo — the BT70 is an M-LOK fitting only and will not mount to a KeyMod handguard.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT70 M-LOK adaptor with its fixings.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904831862,"sku":"BT70","price":34.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt70-m-lok-adaptor-1.jpg?v=1785269776"},{"product_id":"atlas-bipod-bt22-3-inch-leg-extensions","title":"Atlas Bipod BT22 3 Inch Leg Extensions","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT22 3 Inch Leg Extensions\u003c\/b\u003e, part number BT22 from B\u0026amp;T Industries, add 3 inches (76 mm) of height to each leg of any V8, PSR or CAL model Atlas bipod. They install in seconds with the press of the stainless steel plunger, using the same quick-change interface as the Atlas feet. Sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT22 is the fixed-length extension: 3 inches (76 mm), on or off. If you would rather set the added height rather than accept a fixed step, the \u003ca href=\"\/products\/atlas-bipod-bt85-adjustable-leg-extensions\"\u003eBT85 adjustable leg extensions\u003c\/a\u003e are the alternative. If you want the height built into the bipod itself, the Tall models such as the \u003ca href=\"\/products\/atlas-bipod-bt47-nc-psr-tall-no-clamp\"\u003eAtlas BT47-NC PSR Tall bipod\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt69-cal-tall-with-two-screw-picatinny-mount\"\u003eAtlas BT69 CAL Tall bipod\u003c\/a\u003e have longer legs as standard. More in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHill and woodland stalking where heather and bracken sit above the muzzle\u003c\/li\u003e\n\u003cli\u003eShooting over cover, kit or a low bank\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style stages that need more height for one position\u003c\/li\u003e\n\u003cli\u003eGetting extra height without buying a second, taller bipod\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Fixed leg extensions, sold as a pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdded height:\u003c\/b\u003e 3 inches (76 mm) per leg\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e V8, PSR and CAL model Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e Quick-change — installed in seconds with the press of the stainless steel plunger\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFeet:\u003c\/b\u003e Used with the Atlas quick-change feet, including the \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 ski feet\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider cleat feet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eLeg extensions, fixed length, pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdded Height\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e3 inches (76 mm) per leg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eV8, PSR and CAL model Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFitting\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eStainless steel plunger, tool-free quick change\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT22 \/ BT22 \/ 810040220432\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2× Atlas BT22 3 inch (76 mm) leg extensions (one pair)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThese Atlas leg extensions are dispatched tracked from our UK warehouse — no import duties and no customs delays — and are backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow much height do the Atlas BT22 leg extensions add?\u003c\/b\u003e\u003cbr\u003eThe BT22 extensions add 3 inches (76 mm) to each leg, which is a fixed length rather than an adjustable one.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods do the BT22 leg extensions fit?\u003c\/b\u003e\u003cbr\u003eThe BT22 fits the V8, PSR and CAL model Atlas bipods, which includes the BT10, BT46, BT47, BT65 and BT69 in all of their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDo I need tools to fit the BT22 leg extensions?\u003c\/b\u003e\u003cbr\u003eNo — the BT22 uses the same quick-change interface as the Atlas feet and is installed in seconds by pressing the stainless steel plunger.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eCan I still use ski or cleat feet with the leg extensions fitted?\u003c\/b\u003e\u003cbr\u003eYes — the Atlas quick-change feet, including the BT23 ski feet and BT74 Raider cleat feet, fit on the end of the extensions.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains two Atlas BT22 3 inch (76 mm) leg extensions, which is one pair.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904930166,"sku":"BT22","price":59.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt22-3-inch-leg-extensions-1.jpg?v=1785271795"},{"product_id":"atlas-bipod-bt28-afar-accuracy-international-freeland-anschutz-rail-kit","title":"Atlas Bipod BT28 AFAR Accuracy International, Freeland, Anschutz Rail Kit","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT28 AFAR Rail Kit\u003c\/b\u003e, part number BT28 from B\u0026amp;T Industries, mounts into Accuracy International, Freeland and Anschutz accessory rails to provide a low-profile MIL-STD-1913 Picatinny interface. It is what lets Atlas bipods and Accu-Shot PRM monopods run on target and competition stocks that use those accessory rail systems.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT28 is for the accessory rail found on target stocks, not for the AI spigot forend — that is the \u003ca href=\"\/products\/atlas-bipod-bt19-accuracy-international-spigot-aais\"\u003eAtlas BT19 Accuracy International spigot\u003c\/a\u003e. Replacement nuts for this kit are the \u003ca href=\"\/products\/atlas-bipod-bt28-n-afar-rail-nuts\"\u003eAtlas BT28-N AFAR rail nuts\u003c\/a\u003e. For a conventional stock with drilled holes, the \u003ca href=\"\/products\/atlas-bipod-bt15-3-35-inch-picatinny-rail\"\u003eAtlas BT15 3.35 inch Picatinny rail\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt17-4-inch-1913-picatinny-rail\"\u003eAtlas BT17 4 inch Picatinny rail\u003c\/a\u003e are the usual answer. See the range in our \u003ca href=\"\/collections\/f-class-benchrest-bipods\"\u003eF-Class and benchrest bipod selection\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eF-Class, benchrest and target rifle stocks with accessory rails\u003c\/li\u003e\n\u003cli\u003eAnschutz and Freeland target stocks\u003c\/li\u003e\n\u003cli\u003eAccuracy International rifles using the accessory rail rather than the spigot\u003c\/li\u003e\n\u003cli\u003eAdding bipod or monopod mounting without altering the stock\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e AFAR rail kit — accessory rail to 1913 Picatinny\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e Accuracy International, Freeland and Anschutz accessory rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProfile:\u003c\/b\u003e Low-profile Picatinny interface\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTakes:\u003c\/b\u003e Atlas bipods and Accu-Shot PRM monopods with a Picatinny mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSpares:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt28-n-afar-rail-nuts\"\u003eBT28-N AFAR rail nuts\u003c\/a\u003e, sold as a pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAFAR rail kit, accessory rail to 1913 Picatinny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAccuracy International, Freeland and Anschutz accessory rails\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAccepts\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas bipods and Accu-Shot PRM monopods with a Picatinny mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSpare Nuts\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT28-N AFAR rail nuts (pair, sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT28 \/ BT28 \/ 810040220289\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT28 AFAR rail kit with fixings\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas rail kit is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich rails does the Atlas BT28 AFAR kit fit?\u003c\/b\u003e\u003cbr\u003eThe BT28 mounts into Accuracy International, Freeland and Anschutz accessory rails.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the Atlas BT28 provide?\u003c\/b\u003e\u003cbr\u003eThe BT28 provides a low-profile MIL-STD-1913 Picatinny interface, so Atlas bipods and Accu-Shot PRM monopods can be mounted to target and competition stocks that use those accessory rail systems.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the BT28 the same as the BT19 Accuracy International spigot?\u003c\/b\u003e\u003cbr\u003eNo — the BT19 mounts NC Atlas bipods to the AI spigot forend interface, while the BT28 fits the accessory rail used on target and competition stocks, so they are different products for different interfaces.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre replacement nuts available for the BT28?\u003c\/b\u003e\u003cbr\u003eYes — the BT28-N AFAR rail nuts are the replacement mounting nuts for this kit and are sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT28 AFAR rail kit with its fixings.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58307904962934,"sku":"BT28","price":39.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt28-afar-accuracy-international-freeland-anschutz-rail-kit-1.jpg?v=1785269550"},{"product_id":"atlas-bipod-bt30-c-bipod-pouch-coyote-brown","title":"Atlas Bipod BT30-C Bipod Pouch Coyote Brown","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT30-C Bipod Pouch in Coyote Brown\u003c\/b\u003e, part number BT30-C from B\u0026amp;T Industries, is the genuine Atlas carry pouch for V8, standard-height PSR and CAL model bipods. It is cut to the Atlas footprint exactly, so the bipod goes in folded and comes out without a fight.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe same pouch is stocked in three colours: this Coyote Brown version, the \u003ca href=\"\/products\/atlas-bipod-bt30-b-bipod-pouch-black\"\u003eAtlas BT30-B bipod pouch in Black\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt30-r-bipod-pouch-ranger-green\"\u003eAtlas BT30-R bipod pouch in Ranger Green\u003c\/a\u003e. If your bipod is a Tall model, the \u003ca href=\"\/products\/atlas-bipod-bt30-tall-bipod-pouch-coyote-brown\"\u003eBT30 tall Atlas bipod pouch\u003c\/a\u003e covers both standard and tall heights, and for a 5-H or Super CAL the \u003ca href=\"\/products\/atlas-bipod-bt30-s5-large-bipod-pouch\"\u003eBT30-S5 large Atlas bipod pouch\u003c\/a\u003e is the correct size. Browse the rest in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeer stalkers who want a pouch that disappears against dead bracken and stubble\u003c\/li\u003e\n\u003cli\u003eCarrying the bipod on the belt or in a rucksack\u003c\/li\u003e\n\u003cli\u003eTarget and F-Class shooters transporting kit to the firing point\u003c\/li\u003e\n\u003cli\u003eKeeping a quick-detach bipod protected between stages\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Atlas bipod carry pouch\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eColour:\u003c\/b\u003e Coyote Brown\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e V8, standard-height PSR and CAL model Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFit:\u003c\/b\u003e Made to the Atlas footprint by B\u0026amp;T Industries rather than a generic pouch\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBipod pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColour\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eCoyote Brown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eV8, standard-height PSR and CAL Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOther Sizes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30 tall pouch (standard and tall); BT30-S5 large pouch (5-H and Super CAL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-C \/ BT30-C \/ 810040220487\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT30-C bipod pouch in Coyote Brown\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas pouch is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods does the BT30-C pouch fit?\u003c\/b\u003e\u003cbr\u003eThe BT30-C pouch fits the V8, standard-height PSR and CAL model Atlas bipods, which includes the BT10, BT46, BT65 and their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT30-C fit a Tall Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNo — the Tall models such as the BT47 PSR Tall and BT69 CAL Tall need the BT30 tall pouch, which is cut to take both standard and tall height bipods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich pouch do I need for a 5-H or Super CAL bipod?\u003c\/b\u003e\u003cbr\u003eThe BT30-S5 large Atlas bipod pouch is the correct size for the 5-H and Super CAL bipods, because the standard BT30-C is cut for the smaller V8, PSR and CAL models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat colours is this Atlas pouch available in?\u003c\/b\u003e\u003cbr\u003eThe standard-height Atlas pouch is stocked in Coyote Brown as the BT30-C, Black as the BT30-B and Ranger Green as the BT30-R.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT30-C bipod pouch in Coyote Brown.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345959424374,"sku":"BT30-C","price":59.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt30-c-bipod-pouch-coyote-brown-1.jpg?v=1785367847"},{"product_id":"atlas-bipod-bt30-r-bipod-pouch-ranger-green","title":"Atlas Bipod BT30-R Bipod Pouch Ranger Green","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT30-R Bipod Pouch in Ranger Green\u003c\/b\u003e, part number BT30-R from B\u0026amp;T Industries, is the genuine Atlas carry pouch for V8, standard-height PSR and CAL model bipods. It is cut to the Atlas footprint exactly, so the bipod goes in folded and comes out without a fight.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe same pouch is stocked in three colours: this Ranger Green version, the \u003ca href=\"\/products\/atlas-bipod-bt30-b-bipod-pouch-black\"\u003eAtlas BT30-B bipod pouch in Black\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt30-c-bipod-pouch-coyote-brown\"\u003eAtlas BT30-C bipod pouch in Coyote Brown\u003c\/a\u003e. If your bipod is a Tall model, the \u003ca href=\"\/products\/atlas-bipod-bt30-tall-bipod-pouch-coyote-brown\"\u003eBT30 tall Atlas bipod pouch\u003c\/a\u003e covers both standard and tall heights, and for a 5-H or Super CAL the \u003ca href=\"\/products\/atlas-bipod-bt30-s5-large-bipod-pouch\"\u003eBT30-S5 large Atlas bipod pouch\u003c\/a\u003e is the correct size. Browse the rest in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWoodland stalkers who want a pouch that blends into green cover\u003c\/li\u003e\n\u003cli\u003eCarrying the bipod on the belt or in a rucksack\u003c\/li\u003e\n\u003cli\u003eTarget and F-Class shooters transporting kit to the firing point\u003c\/li\u003e\n\u003cli\u003eKeeping a quick-detach bipod protected between stages\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Atlas bipod carry pouch\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eColour:\u003c\/b\u003e Ranger Green\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e V8, standard-height PSR and CAL model Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFit:\u003c\/b\u003e Made to the Atlas footprint by B\u0026amp;T Industries rather than a generic pouch\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBipod pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColour\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eRanger Green\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eV8, standard-height PSR and CAL Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOther Sizes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30 tall pouch (standard and tall); BT30-S5 large pouch (5-H and Super CAL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-R \/ BT30-R \/ 810040220494\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT30-R bipod pouch in Ranger Green\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas pouch is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods does the BT30-R pouch fit?\u003c\/b\u003e\u003cbr\u003eThe BT30-R pouch fits the V8, standard-height PSR and CAL model Atlas bipods, which includes the BT10, BT46, BT65 and their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT30-R fit a Tall Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNo — the Tall models such as the BT47 PSR Tall and BT69 CAL Tall need the BT30 tall pouch, which is cut to take both standard and tall height bipods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich pouch do I need for a 5-H or Super CAL bipod?\u003c\/b\u003e\u003cbr\u003eThe BT30-S5 large Atlas bipod pouch is the correct size for the 5-H and Super CAL bipods, because the standard BT30-R is cut for the smaller V8, PSR and CAL models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat colours is this Atlas pouch available in?\u003c\/b\u003e\u003cbr\u003eThe standard-height Atlas pouch is stocked in Ranger Green as the BT30-R, Black as the BT30-B and Coyote Brown as the BT30-C.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT30-R bipod pouch in Ranger Green.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345959457142,"sku":"BT30-R","price":59.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt30-r-bipod-pouch-ranger-green-1.jpg?v=1785367848"},{"product_id":"accu-shot-bt03-sling-stud-accessory-m1a-ar15-ar10","title":"Accu-Shot BT03 M1-A \/ AR-15 \/ AR-10 Sling Stud Accessory","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT03 Sling Stud Accessory\u003c\/b\u003e, part number BT03 from B\u0026amp;T Industries, adds a sling stud to M1-A, AR-15 and AR-10 pattern stocks. It is what lets a sling-stud-mounted Accu-Shot monopod be fitted to rifles that do not have a stud from the factory.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT03 covers M1-A, AR-15 and AR-10 stocks. On a Magpul PRS stock the equivalent part is the \u003ca href=\"\/products\/accu-shot-bt14-threaded-magpul-prs-sling-studs\"\u003eAccu-Shot BT14 threaded Magpul PRS sling studs\u003c\/a\u003e. If your stock has a Picatinny rail under the butt instead, you do not need a stud at all — a Precision Rail Monopod such as the \u003ca href=\"\/products\/accu-shot-bt12-qk-monopod-prm-mount\"\u003eAccu-Shot BT12-QK PRM monopod\u003c\/a\u003e clamps straight to the rail. The monopods themselves are in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAR-15 and AR-10 pattern rifles used for practical and service rifle\u003c\/li\u003e\n\u003cli\u003eM1-A rifles being fitted with a rear monopod\u003c\/li\u003e\n\u003cli\u003eNight fox and vermin rifles on AR-pattern stocks\u003c\/li\u003e\n\u003cli\u003eAnyone who bought a sling stud monopod and found no stud on the stock\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Sling stud accessory\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e M1-A, AR-15 and AR-10 pattern stocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose:\u003c\/b\u003e Adds a sling stud so a sling-stud Accu-Shot monopod can be mounted\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorks with:\u003c\/b\u003e \u003ca href=\"\/products\/accu-shot-bt01-qk-monopod-sling-stud-mount\"\u003eBT01-QK\u003c\/a\u003e, \u003ca href=\"\/products\/accu-shot-bt04-qk-monopod-sling-stud-mount\"\u003eBT04-QK\u003c\/a\u003e, \u003ca href=\"\/products\/accu-shot-bt05-qk-monopod-sling-stud-mount\"\u003eBT05-QK\u003c\/a\u003e and \u003ca href=\"\/products\/accu-shot-bt06-qk-monopod-sling-stud-mount\"\u003eBT06-QK\u003c\/a\u003e sling stud monopods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSling stud accessory\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM1-A, AR-15 and AR-10 pattern stocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eUsed With\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSling stud mount Accu-Shot monopods (BT01-QK, BT04-QK, BT05-QK, BT06-QK)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT03 \/ BT03 \/ 810040220371\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT03 sling stud accessory\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot accessory is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the Accu-Shot BT03 do?\u003c\/b\u003e\u003cbr\u003eThe BT03 adds a sling stud to M1-A, AR-15 and AR-10 pattern stocks, so that a sling-stud-mounted Accu-Shot monopod can be fitted to a rifle that has no stud from the factory.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich monopods work with the Accu-Shot BT03?\u003c\/b\u003e\u003cbr\u003eThe BT03 supports the sling stud mount Accu-Shot monopods, which are the BT01-QK, BT04-QK, BT05-QK and BT06-QK.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat if my stock is a Magpul PRS?\u003c\/b\u003e\u003cbr\u003eThe Magpul PRS uses the BT14 threaded sling studs rather than the BT03, so order the BT14 for that stock.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDo I need the BT03 if my buttstock has a Picatinny rail?\u003c\/b\u003e\u003cbr\u003eNo — with a rail under the buttstock you can use a Precision Rail Monopod such as the BT12-QK, which clamps directly to the rail and needs no sling stud.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT03 sling stud accessory.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345963192694,"sku":"BT03","price":18.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt03-sling-stud-accessory-m1a-ar15-ar10-1.jpg?v=1786218034"},{"product_id":"accu-shot-bt07-tac-cap-steel-replacement-cap","title":"Accu-Shot BT07 Tac-Cap Steel Replacement Cap","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT07 Tac-Cap Steel Replacement Cap\u003c\/b\u003e, part number BT07 from B\u0026amp;T Industries, is a steel replacement for the standard plastic cap fitted to Accu-Shot monopods. It is the harder-wearing option for a rifle that gets worked hard in the field.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT07 is an upgrade part, not a monopod. The monopods it serves are the sling stud models such as the \u003ca href=\"\/products\/accu-shot-bt04-qk-monopod-sling-stud-mount\"\u003eAccu-Shot BT04-QK locking monopod\u003c\/a\u003e, the Precision Rail Monopods such as the \u003ca href=\"\/products\/accu-shot-bt12-qk-monopod-prm-mount\"\u003eAccu-Shot BT12-QK PRM monopod\u003c\/a\u003e, and the Accuracy International models such as the \u003ca href=\"\/products\/accu-shot-bt08-qk-accuracy-international-asai-monopod\"\u003eAccu-Shot BT08-QK ASAI monopod\u003c\/a\u003e. The full line is in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeer stalkers whose monopod takes a beating on rock and hard ground\u003c\/li\u003e\n\u003cli\u003ePractical and service rifle shooters working off barricades\u003c\/li\u003e\n\u003cli\u003eReplacing a worn or damaged plastic cap\u003c\/li\u003e\n\u003cli\u003eAnyone who wants a steel part rather than a plastic one\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Monopod replacement cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial:\u003c\/b\u003e Steel, replacing the standard plastic cap\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose:\u003c\/b\u003e A harder-wearing cap for hard use\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e Accu-Shot monopods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMonopod replacement cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMaterial\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eReplaces\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard plastic cap on Accu-Shot monopods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT07 \/ BT07 \/ 810040220388\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT07 Tac-Cap\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot part is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the Accu-Shot BT07 Tac-Cap?\u003c\/b\u003e\u003cbr\u003eThe BT07 Tac-Cap is a steel replacement for the standard plastic cap fitted to Accu-Shot monopods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhy fit a steel cap instead of the standard plastic one?\u003c\/b\u003e\u003cbr\u003eThe steel Tac-Cap is a harder-wearing upgrade, which suits rifles that are used hard in the field where a plastic cap would take more punishment.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich monopods does the Accu-Shot BT07 fit?\u003c\/b\u003e\u003cbr\u003eThe BT07 is the replacement cap for Accu-Shot monopods, which covers the sling stud, Precision Rail Monopod and Accuracy International models in the Accu-Shot line.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT07 Tac-Cap.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345963225462,"sku":"BT07","price":9.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt07-tac-cap-steel-replacement-cap-1.jpg?v=1786218034"},{"product_id":"accu-shot-bt0857-b-replacement-bolt-m6-80-80","title":"Accu-Shot BT0857-B Replacement Bolt M6 x 80 x 80","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT0857-B Replacement Bolt\u003c\/b\u003e, part number BT0857-B from B\u0026amp;T Industries, is the standard M6 × 80 × 80 bolt for the BT08-QK and BT57-QK Accuracy International monopods. It is the correct spare when the original bolt is lost or damaged.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT0857-B is the standard-length bolt. If your rifle has additional length-of-pull spacers fitted, the longer \u003ca href=\"\/products\/accu-shot-bt0857-lb-replacement-bolt-m6-80-100\"\u003eAccu-Shot BT0857-LB replacement bolt in M6 × 80 × 100\u003c\/a\u003e is required instead. The monopods these bolts belong to are the \u003ca href=\"\/products\/accu-shot-bt08-qk-accuracy-international-asai-monopod\"\u003eAccu-Shot BT08-QK ASAI monopod\u003c\/a\u003e for AE, AW and AICS pattern stocks and the \u003ca href=\"\/products\/accu-shot-bt57-qk-accuracy-international-at-asaiat-monopod\"\u003eAccu-Shot BT57-QK ASAIAT monopod\u003c\/a\u003e for the AI AT. Both are in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAccuracy International rifles fitted with a BT08-QK or BT57-QK monopod\u003c\/li\u003e\n\u003cli\u003eReplacing a bolt lost during a stock strip or rebuild\u003c\/li\u003e\n\u003cli\u003eKeeping a spare with the rifle's kit\u003c\/li\u003e\n\u003cli\u003eRifles at standard length of pull, with no extra spacers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Replacement bolt, standard length\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize:\u003c\/b\u003e M6 × 80 × 80\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e BT08-QK and BT57-QK Accuracy International monopods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLonger version:\u003c\/b\u003e BT0857-LB in M6 × 80 × 100, for use with length-of-pull spacers\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eReplacement bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSize\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM6 × 80 × 80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT08-QK and BT57-QK monopods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLonger Alternative\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT0857-LB (M6 × 80 × 100)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT0857-B \/ BT0857-B \/ —\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× M6 × 80 × 80 replacement bolt\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot part is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich monopods does the Accu-Shot BT0857-B bolt fit?\u003c\/b\u003e\u003cbr\u003eThe BT0857-B fits the BT08-QK and BT57-QK Accuracy International monopods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat size is the Accu-Shot BT0857-B bolt?\u003c\/b\u003e\u003cbr\u003eThe BT0857-B is an M6 × 80 × 80 bolt, which is the standard length for these monopods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhen do I need the longer BT0857-LB bolt instead?\u003c\/b\u003e\u003cbr\u003eThe longer BT0857-LB in M6 × 80 × 100 is required when additional length-of-pull spacers are fitted to the rifle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one M6 × 80 × 80 replacement bolt.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345963290998,"sku":"BT0857-B","price":7.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt0857-b-replacement-bolt-m6-80-80-1.jpg?v=1786218033"},{"product_id":"accu-shot-bt0857-lb-replacement-bolt-m6-80-100","title":"Accu-Shot BT0857-LB Replacement Bolt M6 x 80 x 100","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT0857-LB Replacement Bolt\u003c\/b\u003e, part number BT0857-LB from B\u0026amp;T Industries, is the long M6 × 80 × 100 bolt for the BT08-QK and BT57-QK Accuracy International monopods. It is the bolt required when additional length-of-pull spacers are fitted to the rifle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe extra length is the whole point: at standard length of pull, the shorter \u003ca href=\"\/products\/accu-shot-bt0857-b-replacement-bolt-m6-80-80\"\u003eAccu-Shot BT0857-B replacement bolt in M6 × 80 × 80\u003c\/a\u003e is the correct part. The monopods these bolts belong to are the \u003ca href=\"\/products\/accu-shot-bt08-qk-accuracy-international-asai-monopod\"\u003eAccu-Shot BT08-QK ASAI monopod\u003c\/a\u003e for AE, AW and AICS pattern stocks and the \u003ca href=\"\/products\/accu-shot-bt57-qk-accuracy-international-at-asaiat-monopod\"\u003eAccu-Shot BT57-QK ASAIAT monopod\u003c\/a\u003e for the AI AT. Both are in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAccuracy International rifles with length-of-pull spacers fitted\u003c\/li\u003e\n\u003cli\u003eTaller shooters who have lengthened the stock\u003c\/li\u003e\n\u003cli\u003eReplacing a bolt lost during a stock strip or rebuild\u003c\/li\u003e\n\u003cli\u003eBT08-QK and BT57-QK monopod owners adding spacers\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Replacement bolt, long\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize:\u003c\/b\u003e M6 × 80 × 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e BT08-QK and BT57-QK Accuracy International monopods with length-of-pull spacers\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStandard version:\u003c\/b\u003e BT0857-B in M6 × 80 × 80, for a rifle without extra spacers\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eReplacement bolt, long\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSize\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eM6 × 80 × 100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT08-QK and BT57-QK monopods (with length-of-pull spacers)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStandard Alternative\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT0857-B (M6 × 80 × 80)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT0857-LB \/ BT0857-LB \/ —\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× M6 × 80 × 100 replacement bolt\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot part is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich monopods does the Accu-Shot BT0857-LB bolt fit?\u003c\/b\u003e\u003cbr\u003eThe BT0857-LB fits the BT08-QK and BT57-QK Accuracy International monopods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat size is the Accu-Shot BT0857-LB bolt?\u003c\/b\u003e\u003cbr\u003eThe BT0857-LB is an M6 × 80 × 100 bolt, which is the long version in this pair of part numbers.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhen do I need the BT0857-LB rather than the BT0857-B?\u003c\/b\u003e\u003cbr\u003eThe longer BT0857-LB is required when additional length-of-pull spacers are fitted; without spacers, the standard BT0857-B in M6 × 80 × 80 is the correct bolt.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one M6 × 80 × 100 replacement bolt.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345963356534,"sku":"BT0857-LB","price":8.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt0857-lb-replacement-bolt-m6-80-100-1.jpg?v=1786218033"},{"product_id":"accu-shot-bt14-threaded-magpul-prs-sling-studs","title":"Accu-Shot BT14 Threaded Magpul PRS Sling Studs","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT14 Threaded Magpul PRS Sling Studs\u003c\/b\u003e, part number BT14 from B\u0026amp;T Industries, are threaded sling studs for the Magpul PRS stock. They let a sling-stud-mounted Accu-Shot monopod be fitted to a PRS-equipped rifle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT14 is the Magpul PRS answer. On M1-A, AR-15 and AR-10 pattern stocks the equivalent is the \u003ca href=\"\/products\/accu-shot-bt03-sling-stud-accessory-m1a-ar15-ar10\"\u003eAccu-Shot BT03 sling stud accessory\u003c\/a\u003e. If your stock has a Picatinny rail under the butt, a Precision Rail Monopod such as the \u003ca href=\"\/products\/accu-shot-bt13-qk-monopod-prm-mount\"\u003eAccu-Shot BT13-QK PRM monopod\u003c\/a\u003e clamps straight to it and no stud is needed. All of the monopods are in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRifles fitted with the Magpul PRS stock\u003c\/li\u003e\n\u003cli\u003ePractical and service rifle builds on AR-pattern rifles\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting with a rear monopod\u003c\/li\u003e\n\u003cli\u003eAdding monopod mounting without changing the stock\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Threaded sling studs\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e Magpul PRS stock\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose:\u003c\/b\u003e Provides the stud a sling-stud Accu-Shot monopod mounts to\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorks with:\u003c\/b\u003e \u003ca href=\"\/products\/accu-shot-bt01-qk-monopod-sling-stud-mount\"\u003eBT01-QK\u003c\/a\u003e, \u003ca href=\"\/products\/accu-shot-bt04-qk-monopod-sling-stud-mount\"\u003eBT04-QK\u003c\/a\u003e, \u003ca href=\"\/products\/accu-shot-bt05-qk-monopod-sling-stud-mount\"\u003eBT05-QK\u003c\/a\u003e and \u003ca href=\"\/products\/accu-shot-bt06-qk-monopod-sling-stud-mount\"\u003eBT06-QK\u003c\/a\u003e sling stud monopods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eThreaded sling studs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMagpul PRS stock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eUsed With\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSling stud mount Accu-Shot monopods (BT01-QK, BT04-QK, BT05-QK, BT06-QK)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT14 \/ BT14 \/ —\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAccu-Shot BT14 threaded PRS sling studs\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThese Accu-Shot studs are dispatched tracked from our UK warehouse — no import duties and no customs delays — and are backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the Accu-Shot BT14 do?\u003c\/b\u003e\u003cbr\u003eThe BT14 provides threaded sling studs for the Magpul PRS stock, so that a sling-stud-mounted Accu-Shot monopod can be fitted to a PRS-equipped rifle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich stock does the Accu-Shot BT14 fit?\u003c\/b\u003e\u003cbr\u003eThe BT14 is made for the Magpul PRS stock.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich monopods work with the Accu-Shot BT14?\u003c\/b\u003e\u003cbr\u003eThe BT14 supports the sling stud mount Accu-Shot monopods, which are the BT01-QK, BT04-QK, BT05-QK and BT06-QK.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the equivalent part for an AR-15 or M1-A stock?\u003c\/b\u003e\u003cbr\u003eThe BT03 sling stud accessory is the equivalent for M1-A, AR-15 and AR-10 pattern stocks.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains the Accu-Shot BT14 threaded Magpul PRS sling studs.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345963487606,"sku":"BT14","price":6.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt14-threaded-magpul-prs-sling-studs-1.jpg?v=1786218033"},{"product_id":"accu-shot-bt26-car-adapter","title":"Accu-Shot BT26 CAR Adapter","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT26 CAR Adapter\u003c\/b\u003e, part number BT26 from B\u0026amp;T Industries, is the adapter for mounting Accu-Shot support gear on CAR-pattern stocks.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT26 covers CAR-pattern stocks. The other stock-specific solutions in the Accu-Shot range are the \u003ca href=\"\/products\/accu-shot-bt52-acs-str-picatinny-rail-adapter-kit\"\u003eBT52 for Magpul ACS and STR stocks\u003c\/a\u003e, the \u003ca href=\"\/products\/accu-shot-bt51-ace-skeleton-stock-monopod-bracket\"\u003eBT51 for ACE skeleton stocks\u003c\/a\u003e, the \u003ca href=\"\/products\/accu-shot-bt14-threaded-magpul-prs-sling-studs\"\u003eBT14 threaded studs for the Magpul PRS\u003c\/a\u003e and the \u003ca href=\"\/products\/accu-shot-bt03-sling-stud-accessory-m1a-ar15-ar10\"\u003eBT03 sling stud accessory for M1-A, AR-15 and AR-10 stocks\u003c\/a\u003e. The monopods themselves are in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRifles fitted with CAR-pattern stocks\u003c\/li\u003e\n\u003cli\u003ePractical and service rifle builds\u003c\/li\u003e\n\u003cli\u003eCarbine setups being fitted with Accu-Shot support gear\u003c\/li\u003e\n\u003cli\u003eAdding a mounting interface to a stock that has none\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e CAR adapter\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e CAR-pattern stocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose:\u003c\/b\u003e Mounts Accu-Shot support gear on a CAR-pattern stock\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eCAR adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eCAR-pattern stocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePurpose\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMounting Accu-Shot support gear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT26 \/ BT26 \/ —\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT26 CAR adapter\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot adapter is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich stocks does the Accu-Shot BT26 fit?\u003c\/b\u003e\u003cbr\u003eThe BT26 is B\u0026amp;T's adapter for CAR-pattern stocks.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the Accu-Shot BT26 used for?\u003c\/b\u003e\u003cbr\u003eThe BT26 is used to mount Accu-Shot support gear on a CAR-pattern stock.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs there an equivalent adapter for other stocks?\u003c\/b\u003e\u003cbr\u003eYes — B\u0026amp;T make stock-specific parts including the BT52 for Magpul ACS and STR stocks, the BT51 for ACE skeleton stocks, the BT14 threaded studs for the Magpul PRS and the BT03 sling stud accessory for M1-A, AR-15 and AR-10 patterns.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT26 CAR adapter.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345963520374,"sku":"BT26","price":42.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt26-car-adapter-1.jpg?v=1785277322"},{"product_id":"accu-shot-bt29-sako-trg-rail-kit","title":"Accu-Shot BT29 Sako TRG Rail Kit","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT29 Sako TRG Rail Kit\u003c\/b\u003e, part number BT29 from B\u0026amp;T Industries, adds monopod rail mounting to the Sako TRG. It is compatible with the BT12-QK Precision Rail Monopod specifically.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT29 is TRG-specific and pairs with one monopod: the \u003ca href=\"\/products\/accu-shot-bt12-qk-monopod-prm-mount\"\u003eAccu-Shot BT12-QK PRM monopod\u003c\/a\u003e. For the front of the same rifle, the \u003ca href=\"\/products\/atlas-bipod-bt21-trg-bracket\"\u003eAtlas BT21 TRG bracket\u003c\/a\u003e mounts Atlas bipods to the TRG. Other stock-specific monopod rail kits in the range include the \u003ca href=\"\/products\/accu-shot-bt52-acs-str-picatinny-rail-adapter-kit\"\u003eBT52 for Magpul ACS and STR stocks\u003c\/a\u003e, the \u003ca href=\"\/products\/accu-shot-bt78-sig-sauer-cross-buttstock-rail-kit\"\u003eBT78 for the SIG Sauer CROSS\u003c\/a\u003e and the \u003ca href=\"\/products\/accu-shot-bt84-krg-10-22-bravo-rail-kit\"\u003eBT84 for the KRG Bravo\u003c\/a\u003e. All are listed in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSako TRG rifles used for deer stalking and long-range work\u003c\/li\u003e\n\u003cli\u003eTarget, F-Class and practical rifle on a TRG\u003c\/li\u003e\n\u003cli\u003eTRG owners adding a rear monopod to a bipod-equipped rifle\u003c\/li\u003e\n\u003cli\u003eCompleting a front-and-rear support setup on the same rifle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Monopod rail kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e Sako TRG\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatibility:\u003c\/b\u003e BT12-QK Precision Rail Monopod only\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFront support:\u003c\/b\u003e Pairs with the BT21 TRG bracket and an Atlas bipod\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMonopod rail kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSako TRG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMonopod Compatibility\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT12-QK only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT29 \/ BT29 \/ 810040220302\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT29 Sako TRG rail kit with fixings\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot rail kit is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich rifle does the Accu-Shot BT29 rail kit fit?\u003c\/b\u003e\u003cbr\u003eThe BT29 rail kit is made for the Sako TRG.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich monopod works with the Accu-Shot BT29?\u003c\/b\u003e\u003cbr\u003eThe BT29 is compatible with the BT12-QK Precision Rail Monopod specifically, so the taller BT13-QK and BT31-QK are not the right choice with this kit.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow do I mount an Atlas bipod to a Sako TRG?\u003c\/b\u003e\u003cbr\u003eThe Atlas BT21 TRG bracket mounts Atlas bipods to the TRG and incorporates a 1913 Picatinny rail, so two-screw and ADM lever bipods clamp straight on.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT29 Sako TRG rail kit with its fixings.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345964732790,"sku":"BT29","price":39.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt29-sako-trg-rail-kit-1.jpg?v=1786218033"},{"product_id":"accu-shot-bt39-accuracy-international-monopod-bracket","title":"Accu-Shot BT39 Accuracy International Monopod Bracket","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT39 Accuracy International Monopod Bracket\u003c\/b\u003e, part number BT39 from B\u0026amp;T Industries, adapts the BT08-QK monopod to Accuracy International \"Gen 2\" style stocksides. It is the part that makes the BT08-QK fit where it otherwise would not.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT39 is an adapter bracket for one specific monopod — the \u003ca href=\"\/products\/accu-shot-bt08-qk-accuracy-international-asai-monopod\"\u003eAccu-Shot BT08-QK ASAI monopod\u003c\/a\u003e. It is not needed for the \u003ca href=\"\/products\/accu-shot-bt57-qk-accuracy-international-at-asaiat-monopod\"\u003eAccu-Shot BT57-QK ASAIAT monopod\u003c\/a\u003e, which is built for the Accuracy International AT. For the front of the rifle, the \u003ca href=\"\/products\/atlas-bipod-bt19-accuracy-international-spigot-aais\"\u003eAtlas BT19 Accuracy International spigot\u003c\/a\u003e mounts NC Atlas bipods to the AI forend. The monopod line is in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAccuracy International rifles with \"Gen 2\" style stocksides\u003c\/li\u003e\n\u003cli\u003eOwners of a BT08-QK monopod moving it to a Gen 2 stock\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting on an AI platform\u003c\/li\u003e\n\u003cli\u003eTarget and F-Class work with an AI-stocked rifle\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Monopod adapter bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e Accuracy International \"Gen 2\" style stocksides\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFor:\u003c\/b\u003e The BT08-QK monopod\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose:\u003c\/b\u003e Adapts the BT08-QK to a stockside it does not fit directly\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMonopod adapter bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAccuracy International \"Gen 2\" style stocksides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFor Monopod\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT08-QK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT39 \/ BT39 \/ —\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT39 Accuracy International monopod bracket\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot bracket is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the Accu-Shot BT39 bracket do?\u003c\/b\u003e\u003cbr\u003eThe BT39 adapts the BT08-QK monopod to Accuracy International \"Gen 2\" style stocksides.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich monopod is the Accu-Shot BT39 for?\u003c\/b\u003e\u003cbr\u003eThe BT39 is for the BT08-QK monopod specifically.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDo I need the BT39 for an Accuracy International AT?\u003c\/b\u003e\u003cbr\u003eNo — the AT uses the BT57-QK ASAIAT monopod, which is built for that rifle and does not need this bracket.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT39 Accuracy International monopod bracket.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345964765558,"sku":"BT39","price":49.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt39-accuracy-international-monopod-bracket-1.jpg?v=1786218033"},{"product_id":"accu-shot-bt51-ace-skeleton-stock-monopod-bracket","title":"Accu-Shot BT51 ACE Skeleton Stock Monopod Bracket","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT51 ACE Skeleton Stock Monopod Bracket\u003c\/b\u003e, part number BT51 from B\u0026amp;T Industries, adds Accu-Shot monopod mounting to ACE skeleton stocks. It is the interface that gives a skeleton stock somewhere to carry a rear monopod.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT51 is specific to ACE skeleton stocks. Other stock-specific mounting solutions in the range are the \u003ca href=\"\/products\/accu-shot-bt52-acs-str-picatinny-rail-adapter-kit\"\u003eBT52 for Magpul ACS and STR stocks\u003c\/a\u003e, the \u003ca href=\"\/products\/accu-shot-bt78-sig-sauer-cross-buttstock-rail-kit\"\u003eBT78 for the SIG Sauer CROSS\u003c\/a\u003e, the \u003ca href=\"\/products\/accu-shot-bt84-krg-10-22-bravo-rail-kit\"\u003eBT84 for the KRG Bravo\u003c\/a\u003e and the \u003ca href=\"\/products\/accu-shot-bt03-sling-stud-accessory-m1a-ar15-ar10\"\u003eBT03 sling stud accessory for M1-A, AR-15 and AR-10 stocks\u003c\/a\u003e. Monopods are in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRifles fitted with ACE skeleton stocks\u003c\/li\u003e\n\u003cli\u003ePractical and service rifle builds needing rear support\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting from a lightweight build\u003c\/li\u003e\n\u003cli\u003eAdding monopod mounting to a stock that has none\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Monopod bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e ACE skeleton stocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose:\u003c\/b\u003e Adds Accu-Shot monopod mounting to a skeleton stock\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSupplied with:\u003c\/b\u003e Fixings\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMonopod bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eACE skeleton stocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003ePurpose\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAdds Accu-Shot monopod mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT51 \/ BT51 \/ 810040220548\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT51 ACE bracket with fixings\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot bracket is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich stocks does the Accu-Shot BT51 fit?\u003c\/b\u003e\u003cbr\u003eThe BT51 bracket fits ACE skeleton stocks.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the Accu-Shot BT51 do?\u003c\/b\u003e\u003cbr\u003eThe BT51 adds Accu-Shot monopod mounting to an ACE skeleton stock, which otherwise has no interface for a rear monopod.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs there an equivalent bracket for other stocks?\u003c\/b\u003e\u003cbr\u003eYes — B\u0026amp;T make stock-specific solutions including the BT52 for Magpul ACS and STR stocks, the BT78 for the SIG Sauer CROSS, the BT84 for the KRG Bravo and the BT03 sling stud accessory for M1-A, AR-15 and AR-10 patterns.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT51 ACE bracket with its fixings.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345964798326,"sku":"BT51","price":49.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt51-ace-skeleton-stock-monopod-bracket-1.jpg?v=1786218032"},{"product_id":"accu-shot-bt52-acs-str-picatinny-rail-adapter-kit","title":"Accu-Shot BT52 ACS \u0026 STR Picatinny Rail Adapter Kit","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT52 ACS and STR Picatinny Rail Adapter Kit\u003c\/b\u003e, part number BT52 from B\u0026amp;T Industries, adds a MIL-STD-1913 Picatinny rail to Magpul ACS and STR stocks, so that Accu-Shot Precision Rail Monopods can be fitted to carbine setups.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT52 covers the Magpul ACS and STR. The other stock and chassis rail kits in the range are the \u003ca href=\"\/products\/accu-shot-bt78-sig-sauer-cross-buttstock-rail-kit\"\u003eBT78 for the SIG Sauer CROSS\u003c\/a\u003e, the \u003ca href=\"\/products\/accu-shot-bt84-krg-10-22-bravo-rail-kit\"\u003eBT84 for the KRG Bravo\u003c\/a\u003e and the \u003ca href=\"\/products\/accu-shot-bt29-sako-trg-rail-kit\"\u003eBT29 for the Sako TRG\u003c\/a\u003e. If your stock has a sling stud instead, the sling stud monopods such as the \u003ca href=\"\/products\/accu-shot-bt04-qk-monopod-sling-stud-mount\"\u003eAccu-Shot BT04-QK locking monopod\u003c\/a\u003e need no rail at all. The monopods are in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePractical and service rifle builds on Magpul ACS and STR stocks\u003c\/li\u003e\n\u003cli\u003eCarbine setups being fitted with a rear monopod\u003c\/li\u003e\n\u003cli\u003eNight fox and vermin rifles on AR-pattern stocks\u003c\/li\u003e\n\u003cli\u003eAdding rail-mounted rear support without changing the stock\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Picatinny rail adapter kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e Magpul ACS and STR stocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProvides:\u003c\/b\u003e A MIL-STD-1913 Picatinny rail for PRM monopod mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorks with:\u003c\/b\u003e \u003ca href=\"\/products\/accu-shot-bt12-qk-monopod-prm-mount\"\u003eBT12-QK\u003c\/a\u003e, \u003ca href=\"\/products\/accu-shot-bt13-qk-monopod-prm-mount\"\u003eBT13-QK\u003c\/a\u003e and \u003ca href=\"\/products\/accu-shot-bt31-qk-monopod-prm-mount\"\u003eBT31-QK\u003c\/a\u003e Precision Rail Monopods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePicatinny rail adapter kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMagpul ACS and STR stocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eProvides\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-1913 Picatinny rail for PRM monopods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT52 \/ BT52 \/ 810040220364\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT52 rail adapter kit with fixings\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot rail kit is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich stocks does the Accu-Shot BT52 fit?\u003c\/b\u003e\u003cbr\u003eThe BT52 fits the Magpul ACS and STR stocks.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the Accu-Shot BT52 provide?\u003c\/b\u003e\u003cbr\u003eThe BT52 adds a MIL-STD-1913 Picatinny rail to the stock, which is what a Precision Rail Monopod clamps onto.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich monopods can I use with the Accu-Shot BT52?\u003c\/b\u003e\u003cbr\u003eAny Accu-Shot Precision Rail Monopod will clamp to the rail it provides, which is the BT12-QK at standard height, the BT13-QK at mid-range and the BT31-QK at extended range.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT52 rail adapter kit with its fixings.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345964831094,"sku":"BT52","price":44.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt52-acs-str-picatinny-rail-adapter-kit-1.jpg?v=1786218032"},{"product_id":"accu-shot-bt78-sig-sauer-cross-buttstock-rail-kit","title":"Accu-Shot BT78 SIG Sauer CROSS Buttstock Rail Kit","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT78 SIG Sauer CROSS Buttstock Rail Kit\u003c\/b\u003e, part number BT78 from B\u0026amp;T Industries, adds a MIL-STD-1913 Picatinny rail to the SIG Sauer CROSS buttstock, enabling Precision Rail Monopod mounting on the CROSS rifle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT78 is CROSS-specific. The other stock and chassis rail kits are the \u003ca href=\"\/products\/accu-shot-bt52-acs-str-picatinny-rail-adapter-kit\"\u003eBT52 for Magpul ACS and STR stocks\u003c\/a\u003e, the \u003ca href=\"\/products\/accu-shot-bt84-krg-10-22-bravo-rail-kit\"\u003eBT84 for the KRG Bravo\u003c\/a\u003e and the \u003ca href=\"\/products\/accu-shot-bt29-sako-trg-rail-kit\"\u003eBT29 for the Sako TRG\u003c\/a\u003e. For the front of the rifle, the \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e covers Picatinny and M-LOK mounting. Monopods are in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSIG Sauer CROSS rifles used for deer stalking and hill work\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting on the CROSS platform\u003c\/li\u003e\n\u003cli\u003eAdding rear monopod support to a lightweight bolt rifle\u003c\/li\u003e\n\u003cli\u003eCROSS owners building a front-and-rear support setup\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Buttstock rail kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e SIG Sauer CROSS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProvides:\u003c\/b\u003e A MIL-STD-1913 Picatinny rail for PRM monopod mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorks with:\u003c\/b\u003e \u003ca href=\"\/products\/accu-shot-bt12-qk-monopod-prm-mount\"\u003eBT12-QK\u003c\/a\u003e, \u003ca href=\"\/products\/accu-shot-bt13-qk-monopod-prm-mount\"\u003eBT13-QK\u003c\/a\u003e and \u003ca href=\"\/products\/accu-shot-bt31-qk-monopod-prm-mount\"\u003eBT31-QK\u003c\/a\u003e Precision Rail Monopods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eButtstock rail kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSIG Sauer CROSS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eProvides\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-1913 Picatinny rail for PRM monopods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT78 \/ BT78 \/ 810040220746\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT78 CROSS rail kit with fixings\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot rail kit is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich rifle does the Accu-Shot BT78 fit?\u003c\/b\u003e\u003cbr\u003eThe BT78 buttstock rail kit is made for the SIG Sauer CROSS.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the Accu-Shot BT78 provide?\u003c\/b\u003e\u003cbr\u003eThe BT78 adds a MIL-STD-1913 Picatinny rail to the CROSS buttstock, which is what a Precision Rail Monopod clamps onto.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich monopods can I use with the Accu-Shot BT78?\u003c\/b\u003e\u003cbr\u003eAny Accu-Shot Precision Rail Monopod will clamp to the rail it provides, which is the BT12-QK at standard height, the BT13-QK at mid-range and the BT31-QK at extended range.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT78 SIG Sauer CROSS rail kit with its fixings.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345964994934,"sku":"BT78","price":34.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt78-sig-sauer-cross-buttstock-rail-kit-1.jpg?v=1786225784"},{"product_id":"accu-shot-bt84-krg-10-22-bravo-rail-kit","title":"Accu-Shot BT84 KRG 10\/22 Bravo Rail Kit","description":"\u003cp\u003eThe \u003cb\u003eAccu-Shot BT84 KRG 10\/22 Bravo Rail Kit\u003c\/b\u003e, part number BT84 from B\u0026amp;T Industries, adds a MIL-STD-1913 Picatinny rail to the KRG Bravo chassis for the Ruger 10\/22, enabling Precision Rail Monopod mounting on rimfire trainers.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT84 is specific to the KRG Bravo chassis on the Ruger 10\/22. The other stock and chassis rail kits are the \u003ca href=\"\/products\/accu-shot-bt52-acs-str-picatinny-rail-adapter-kit\"\u003eBT52 for Magpul ACS and STR stocks\u003c\/a\u003e, the \u003ca href=\"\/products\/accu-shot-bt78-sig-sauer-cross-buttstock-rail-kit\"\u003eBT78 for the SIG Sauer CROSS\u003c\/a\u003e and the \u003ca href=\"\/products\/accu-shot-bt29-sako-trg-rail-kit\"\u003eBT29 for the Sako TRG\u003c\/a\u003e. Monopods to go on it are in our \u003ca href=\"\/collections\/accu-shot-monopods\"\u003eAccu-Shot monopod range\u003c\/a\u003e, and front support is in our \u003ca href=\"\/collections\/rifle-bipods\"\u003eUK rifle bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRimfire trainers built on the KRG Bravo chassis\u003c\/li\u003e\n\u003cli\u003eRimfire benchrest and club target shooting\u003c\/li\u003e\n\u003cli\u003ePractising positional work with the same rear support as a centrefire rifle\u003c\/li\u003e\n\u003cli\u003eRuger 10\/22 owners adding a rear monopod\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Chassis rail kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e KRG Bravo chassis for the Ruger 10\/22\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eProvides:\u003c\/b\u003e A MIL-STD-1913 Picatinny rail for PRM monopod mounting\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWorks with:\u003c\/b\u003e \u003ca href=\"\/products\/accu-shot-bt12-qk-monopod-prm-mount\"\u003eBT12-QK\u003c\/a\u003e, \u003ca href=\"\/products\/accu-shot-bt13-qk-monopod-prm-mount\"\u003eBT13-QK\u003c\/a\u003e and \u003ca href=\"\/products\/accu-shot-bt31-qk-monopod-prm-mount\"\u003eBT31-QK\u003c\/a\u003e Precision Rail Monopods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eChassis rail kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKRG Bravo chassis (Ruger 10\/22)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eProvides\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMIL-STD-1913 Picatinny rail for PRM monopods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT84 \/ BT84 \/ 810040220784\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Accu-Shot BT84 rail kit with fixings\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Accu-Shot rail kit is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich chassis does the Accu-Shot BT84 fit?\u003c\/b\u003e\u003cbr\u003eThe BT84 fits the KRG Bravo chassis for the Ruger 10\/22.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the Accu-Shot BT84 provide?\u003c\/b\u003e\u003cbr\u003eThe BT84 adds a MIL-STD-1913 Picatinny rail to the chassis, which is what a Precision Rail Monopod clamps onto.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich monopods can I use with the Accu-Shot BT84?\u003c\/b\u003e\u003cbr\u003eAny Accu-Shot Precision Rail Monopod will clamp to the rail it provides, which is the BT12-QK at standard height, the BT13-QK at mid-range and the BT31-QK at extended range.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Accu-Shot BT84 rail kit with its fixings.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345965027702,"sku":"BT84","price":39.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/accu-shot-bt84-krg-10-22-bravo-rail-kit-1.jpg?v=1786217686"},{"product_id":"atlas-bipod-bt30-tall-bipod-pouch-coyote-brown","title":"Atlas Bipod BT30 Tall Bipod Pouch Coyote Brown","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT30 Tall Bipod Pouch in Coyote Brown\u003c\/b\u003e, part number BT30 from B\u0026amp;T Industries, is the genuine Atlas carry pouch cut to take both standard and tall height V8, PSR and CAL series bipods. It is the pouch to choose if you run a Tall model, or if you want one pouch that covers either height.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe standard-height-only pouches are the \u003ca href=\"\/products\/atlas-bipod-bt30-b-bipod-pouch-black\"\u003eAtlas BT30-B bipod pouch in Black\u003c\/a\u003e, the \u003ca href=\"\/products\/atlas-bipod-bt30-c-bipod-pouch-coyote-brown\"\u003eAtlas BT30-C bipod pouch in Coyote Brown\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt30-r-bipod-pouch-ranger-green\"\u003eAtlas BT30-R bipod pouch in Ranger Green\u003c\/a\u003e. For a 5-H or Super CAL bipod, the \u003ca href=\"\/products\/atlas-bipod-bt30-s5-large-bipod-pouch\"\u003eBT30-S5 large Atlas bipod pouch\u003c\/a\u003e is the correct size. See the full accessory list in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOwners of Tall Atlas bipods such as the BT47 PSR Tall and BT69 CAL Tall\u003c\/li\u003e\n\u003cli\u003eHill and woodland stalkers carrying a tall bipod on the belt or in a pack\u003c\/li\u003e\n\u003cli\u003eShooters who own both a standard and a tall bipod and want one pouch\u003c\/li\u003e\n\u003cli\u003eKeeping a quick-detach bipod protected in transit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Atlas bipod carry pouch, tall\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eColour:\u003c\/b\u003e Coyote Brown\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e Standard and tall height V8, PSR and CAL series Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoverage:\u003c\/b\u003e One pouch for both heights, unlike the standard-only BT30-B, BT30-C and BT30-R\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBipod pouch, tall\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColour\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eCoyote Brown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard and tall height V8, PSR and CAL Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOther Sizes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-B \/ BT30-C \/ BT30-R standard pouches; BT30-S5 large pouch (5-H and Super CAL)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30 \/ BT30 \/ 810040221200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT30 tall bipod pouch in Coyote Brown\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas pouch is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods does the BT30 tall pouch fit?\u003c\/b\u003e\u003cbr\u003eThe BT30 tall pouch fits both standard and tall height V8, PSR and CAL series Atlas bipods, including the BT10, BT46, BT47, BT65 and BT69.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDo I need the tall pouch or a standard one?\u003c\/b\u003e\u003cbr\u003eIf you own a Tall bipod such as the BT47 PSR Tall or BT69 CAL Tall you need the BT30 tall pouch, and if you own only a standard-height bipod either will work, so the tall pouch is the safer single purchase.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT30 tall pouch fit a 5-H or Super CAL bipod?\u003c\/b\u003e\u003cbr\u003eNo — the 5-H and Super CAL bipods are larger and need the BT30-S5 large Atlas bipod pouch.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat colour is the BT30 tall pouch?\u003c\/b\u003e\u003cbr\u003eThe BT30 tall pouch is supplied in Coyote Brown.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT30 tall bipod pouch in Coyote Brown.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345966666102,"sku":"BT30","price":89.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt30-tall-bipod-pouch-coyote-brown-1.jpg?v=1786217687"},{"product_id":"atlas-bipod-bt30-s5-large-bipod-pouch","title":"Atlas Bipod BT30-S5 Large Bipod Pouch for 5-H \u0026 Super CAL","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT30-S5 Large Bipod Pouch\u003c\/b\u003e, part number BT30-S5 from B\u0026amp;T Industries, is the genuine Atlas carry pouch sized for the Super CAL and 5-H series bipods, supplied in Coyote Brown. It is the big pouch for the big bipods, and the standard-height pouches will not take them.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT30-S5 is the only pouch cut for the \u003ca href=\"\/products\/atlas-bipod-bt35-nc-5-h-no-clamp\"\u003eAtlas 5-H\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt72-nc-super-cal-no-clamp\"\u003eAtlas Super CAL\u003c\/a\u003e bipods. For V8, PSR and CAL models, the smaller pouches are the \u003ca href=\"\/products\/atlas-bipod-bt30-b-bipod-pouch-black\"\u003eAtlas BT30-B bipod pouch in Black\u003c\/a\u003e, the \u003ca href=\"\/products\/atlas-bipod-bt30-c-bipod-pouch-coyote-brown\"\u003eAtlas BT30-C bipod pouch in Coyote Brown\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt30-r-bipod-pouch-ranger-green\"\u003eAtlas BT30-R bipod pouch in Ranger Green\u003c\/a\u003e, with the \u003ca href=\"\/products\/atlas-bipod-bt30-tall-bipod-pouch-coyote-brown\"\u003eBT30 tall Atlas bipod pouch\u003c\/a\u003e covering the Tall models. The rest is in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOwners of the Atlas 5-H and Super CAL bipods\u003c\/li\u003e\n\u003cli\u003eHeavy F-Class, benchrest and long-range rifles transported to the firing point\u003c\/li\u003e\n\u003cli\u003eKeeping a large quick-detach bipod protected in a rifle case\u003c\/li\u003e\n\u003cli\u003eShooters who remove the bipod for travel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Atlas bipod carry pouch, large\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eColour:\u003c\/b\u003e Coyote Brown\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e Super CAL and 5-H series Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSizing:\u003c\/b\u003e The standard BT30-B, BT30-C, BT30-R and BT30 tall pouches will not take a 5-H or Super CAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBipod pouch, large\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eColour\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eCoyote Brown\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSuper CAL and 5-H series Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOther Sizes\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-B \/ BT30-C \/ BT30-R standard pouches; BT30 tall pouch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT30-S5 \/ BT30-S5 \/ 810040221217\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT30-S5 large bipod pouch in Coyote Brown\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas pouch is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods does the BT30-S5 pouch fit?\u003c\/b\u003e\u003cbr\u003eThe BT30-S5 large pouch is sized for the Super CAL and 5-H series Atlas bipods, which includes the BT35 and BT72 in all of their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill a standard Atlas pouch take a 5-H or Super CAL bipod?\u003c\/b\u003e\u003cbr\u003eNo — the BT30-B, BT30-C, BT30-R and BT30 tall pouches are cut for the smaller V8, PSR and CAL bipods, so a 5-H or Super CAL needs the BT30-S5.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat colour is the BT30-S5 pouch?\u003c\/b\u003e\u003cbr\u003eThe BT30-S5 large pouch is supplied in Coyote Brown.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich pouch do I need for a V8, PSR or CAL bipod?\u003c\/b\u003e\u003cbr\u003eStandard-height V8, PSR and CAL bipods take the BT30-B, BT30-C or BT30-R pouch, and the Tall models take the BT30 tall pouch.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT30-S5 large bipod pouch in Coyote Brown.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345966698870,"sku":"BT30-S5","price":99.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt30-s5-large-bipod-pouch-1.jpg?v=1786217687"},{"product_id":"atlas-bipod-bt32-standard-rubber-feet","title":"Atlas Bipod BT32 Standard Rubber Feet Pair","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT32 Standard Rubber Feet\u003c\/b\u003e, part number BT32 from B\u0026amp;T Industries, are the factory replacement feet for V8, PSR and CAL model Atlas bipods. They are the quick-change foot the bipod is supplied with, and the sensible spare to keep once the originals are worn or lost. Sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eRubber is the general-purpose foot. On hard surfaces the \u003ca href=\"\/products\/atlas-bipod-bt74-raider-cleat-feet\"\u003eBT74 Raider stainless steel cleat feet\u003c\/a\u003e bite harder, and on soft ground the \u003ca href=\"\/products\/atlas-bipod-bt23-quick-change-ski-feet\"\u003eBT23 quick-change ski feet\u003c\/a\u003e spread the load. All three fit the same V8, PSR and CAL bipods. The 5-H and Super CAL equivalent rubber foot is the \u003ca href=\"\/products\/atlas-bipod-bt55-5-h-super-cal-standard-rubber-feet\"\u003eBT55 standard rubber feet\u003c\/a\u003e. Everything that fits an Atlas is in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplacing worn or lost feet on an existing Atlas bipod\u003c\/li\u003e\n\u003cli\u003eDeer stalking and general field shooting across mixed ground\u003c\/li\u003e\n\u003cli\u003eIndoor and covered ranges where a cleat foot would mark the bench\u003c\/li\u003e\n\u003cli\u003eKeeping a spare pair in the rifle slip\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Standard rubber feet, sold as a pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e V8, PSR and CAL model Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRole:\u003c\/b\u003e Factory replacement — the foot the bipod ships with\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFitting:\u003c\/b\u003e Atlas quick-change system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNot for:\u003c\/b\u003e 5-H and Super CAL bipods, which take the BT55 instead\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard rubber feet, pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eV8, PSR and CAL model Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFitting\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas quick-change\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDoes Not Fit\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5-H and Super CAL Atlas bipods (use BT55)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT32 \/ BT32 \/ 810040220500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2× Atlas BT32 standard rubber feet (one pair)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThese Atlas feet are dispatched tracked from our UK warehouse — no import duties and no customs delays — and are backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods do the BT32 rubber feet fit?\u003c\/b\u003e\u003cbr\u003eThe BT32 standard rubber feet fit the V8, PSR and CAL model Atlas bipods, which includes the BT10, BT46, BT47, BT65 and BT69 in all of their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre the BT32 the feet my Atlas bipod came with?\u003c\/b\u003e\u003cbr\u003eYes — the BT32 is the factory standard rubber foot supplied on V8, PSR and CAL Atlas bipods, so it is the direct replacement rather than an upgrade.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT32 fit a 5-H or Super CAL Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNo — the 5-H and Super CAL bipods take the larger BT55 standard rubber feet, and the two parts are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow many feet are in a set?\u003c\/b\u003e\u003cbr\u003eThe BT32 is sold as a pair, which is one complete set for a single bipod.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains two Atlas BT32 standard rubber feet, which is one pair.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345966731638,"sku":"BT32","price":24.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt32-standard-rubber-feet-1.jpg?v=1786217686"},{"product_id":"atlas-bipod-bt55-5-h-super-cal-standard-rubber-feet","title":"Atlas Bipod BT55 5-H \u0026 Super CAL Standard Rubber Feet Pair","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT55 5-H and Super CAL Standard Rubber Feet\u003c\/b\u003e, part number BT55 from B\u0026amp;T Industries, are the factory replacement feet for the 5-H and Super CAL series Atlas bipods. They are the foot those bipods are supplied with, and the sensible spare once the originals are worn. Sold as a pair.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eOn the same heavyweight bipods, the \u003ca href=\"\/products\/atlas-bipod-bt75-raider-cleat-feet-for-5-h-super-cal\"\u003eBT75 Raider cleat feet\u003c\/a\u003e grip hard surfaces and the \u003ca href=\"\/products\/atlas-bipod-bt66-5-h-super-cal-bas-ski-feet\"\u003eBT66 BAS ski feet\u003c\/a\u003e spread the load on soft ground. If your bipod is a V8, PSR or CAL model, the smaller \u003ca href=\"\/products\/atlas-bipod-bt32-standard-rubber-feet\"\u003eBT32 standard rubber feet\u003c\/a\u003e are the correct part instead. Browse the rest in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eReplacing worn or lost feet on a 5-H or Super CAL Atlas bipod\u003c\/li\u003e\n\u003cli\u003eHeavy F-Class, benchrest and target rifles on covered firing points\u003c\/li\u003e\n\u003cli\u003eGeneral field shooting across mixed ground\u003c\/li\u003e\n\u003cli\u003eKeeping a spare pair with a heavy rifle's kit\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Standard rubber feet for 5-H and Super CAL, sold as a pair\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e \u003ca href=\"\/products\/atlas-bipod-bt35-nc-5-h-no-clamp\"\u003eAtlas 5-H\u003c\/a\u003e and \u003ca href=\"\/products\/atlas-bipod-bt72-lw17-super-cal-with-adm-170-s-lever-qd-mount\"\u003eAtlas Super CAL\u003c\/a\u003e bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRole:\u003c\/b\u003e Factory replacement — the foot those bipods ship with\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNot for:\u003c\/b\u003e V8, PSR and CAL bipods, which take the BT32 instead\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eStandard rubber feet, pair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5-H and Super CAL Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eDoes Not Fit\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eV8, PSR and CAL Atlas bipods (use BT32)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT55 \/ BT55 \/ 810040220579\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e2× Atlas BT55 standard rubber feet for 5-H and Super CAL (one pair)\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThese Atlas feet are dispatched tracked from our UK warehouse — no import duties and no customs delays — and are backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods do the BT55 rubber feet fit?\u003c\/b\u003e\u003cbr\u003eThe BT55 standard rubber feet fit the 5-H and Super CAL series Atlas bipods, which includes the BT35 and BT72 in all of their mount variants.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre the BT55 the feet my 5-H or Super CAL came with?\u003c\/b\u003e\u003cbr\u003eYes — the BT55 is the factory standard rubber foot for the 5-H and Super CAL bipods, so it is the direct replacement rather than an upgrade.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT55 fit a V8, PSR or CAL Atlas bipod?\u003c\/b\u003e\u003cbr\u003eNo — those bipods take the smaller BT32 standard rubber feet, and the two parts are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow many feet are in a set?\u003c\/b\u003e\u003cbr\u003eThe BT55 is sold as a pair, which is one complete set for a single bipod.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains two Atlas BT55 standard rubber feet for 5-H and Super CAL bipods, which is one pair.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345966764406,"sku":"BT55","price":34.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt55-5-h-super-cal-standard-rubber-feet-1.jpg?v=1786217460"},{"product_id":"atlas-bipod-bt85-adjustable-leg-extensions","title":"Atlas Bipod BT85 Adjustable Leg Extensions","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT85 Adjustable Leg Extensions\u003c\/b\u003e, part number BT85 from B\u0026amp;T Industries, add adjustable extra height to Atlas bipod legs. Rather than a single fixed step, the extension length is dialled in to suit the ground you are shooting over.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT85 is the adjustable extension; the \u003ca href=\"\/products\/atlas-bipod-bt22-3-inch-leg-extensions\"\u003eBT22 3 inch (76 mm) leg extensions\u003c\/a\u003e are the fixed-length alternative and are the simpler, lighter option if one height is all you need. If you want the height built into the bipod, the Tall models such as the \u003ca href=\"\/products\/atlas-bipod-bt69-lw17-cal-tall-with-adm-170-s-lever-qd-mount\"\u003eAtlas BT69-LW17 CAL Tall bipod\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt47-lw17-psr-tall-with-adm-170-s-lever-qd-mount\"\u003eAtlas BT47-LW17 PSR Tall bipod\u003c\/a\u003e have longer legs as standard. See the rest in our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHill and woodland stalking over uneven, changeable ground\u003c\/li\u003e\n\u003cli\u003eShooting over cover where the required height varies shot to shot\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style stages with mixed positions\u003c\/li\u003e\n\u003cli\u003eShooters who want one bipod to cover several heights\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Adjustable leg extensions for Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e Extension length is set rather than fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose:\u003c\/b\u003e Adds height to Atlas bipod legs for shooting over cover and vegetation\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAlternative:\u003c\/b\u003e The BT22 gives a fixed 3 inches (76 mm) per leg if adjustability is not needed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAdjustable leg extensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAdjustment\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSet to the length required, rather than a fixed step\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAtlas bipod legs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT85 \/ BT85 \/ 810040220838\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAtlas BT85 adjustable leg extensions\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThese Atlas leg extensions are dispatched tracked from our UK warehouse — no import duties and no customs delays — and are backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat do the Atlas BT85 leg extensions do?\u003c\/b\u003e\u003cbr\u003eThe BT85 adds adjustable extra height to Atlas bipod legs, so the amount of extension can be set to suit the ground rather than being fixed at one length.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the difference between the Atlas BT85 and the BT22?\u003c\/b\u003e\u003cbr\u003eThe BT85 is adjustable, while the BT22 adds a fixed 3 inches (76 mm) to each leg, so the BT22 is the simpler choice when a single extra height is all that is needed.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShould I buy leg extensions or a Tall bipod?\u003c\/b\u003e\u003cbr\u003eLeg extensions add height to a bipod you already own and can be removed again, while a Tall model such as the BT47 PSR Tall or BT69 CAL Tall carries the extra leg length permanently, which suits shooters who always need the height.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains the Atlas BT85 adjustable leg extensions.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345966797174,"sku":"BT85","price":129.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt85-adjustable-leg-extensions-1.jpg?v=1786217460"},{"product_id":"atlas-bipod-bt20-aais-1913-rail-set","title":"Atlas Bipod BT20 AAIS 1913 Rail Set","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT20 AAIS 1913 Rail Set\u003c\/b\u003e, part number BT20 from B\u0026amp;T Industries, is the three-piece MIL-STD-1913 rail option for the BT19 Accuracy International spigot. Fit it and any two-screw or ADM lever-mount Atlas bipod can run on the AI spigot system, not just the NC (No Clamp) models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT20 is the full three-rail set. The \u003ca href=\"\/products\/atlas-bipod-bt20-b-aais-bottom-rail\"\u003eAtlas BT20-B AAIS bottom rail\u003c\/a\u003e is the bottom rail on its own, with blind threaded holes, used for adaption and custom mounting work. The \u003ca href=\"\/products\/atlas-bipod-bt43-leveraged-rail\"\u003eAtlas BT43 leveraged rail\u003c\/a\u003e is that same bottom rail supplied with an ADM-170-S lever already installed. The spigot itself is the \u003ca href=\"\/products\/atlas-bipod-bt19-accuracy-international-spigot-aais\"\u003eAtlas BT19 Accuracy International spigot\u003c\/a\u003e. Bipods to go on it are in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAccuracy International rifles where the owner already has a Picatinny-mount bipod\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting on an AI platform\u003c\/li\u003e\n\u003cli\u003eTarget, F-Class and practical rifle with an AI-stocked rifle\u003c\/li\u003e\n\u003cli\u003eAdding rail-mounted accessories to the AI spigot interface\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Three-piece 1913 Picatinny rail set for the BT19 AAIS spigot\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e BT19 Accuracy International spigot\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose:\u003c\/b\u003e Lets two-screw and ADM lever-mount Atlas bipods run on the AI spigot system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRelated:\u003c\/b\u003e BT20-B is the bottom rail only; BT43 is the bottom rail with an ADM-170-S lever installed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1913 Picatinny rail set, three pieces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT19 Accuracy International spigot (AAIS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAccepts\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-screw and ADM lever-mount Atlas bipods, and Picatinny monopods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT20 \/ BT20 \/ 810040220258\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e3× 1913 Picatinny rails for the BT19 spigot, with fixings\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas rail set is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the Atlas BT20 rail set do?\u003c\/b\u003e\u003cbr\u003eThe BT20 adds three MIL-STD-1913 Picatinny rails to the BT19 Accuracy International spigot, so that two-screw and ADM lever-mount Atlas bipods can be used on the AI spigot system rather than only NC models.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDo I need the BT19 spigot as well as the BT20?\u003c\/b\u003e\u003cbr\u003eYes — the BT20 is the rail set for the BT19 spigot, so the spigot is the part that mounts to the rifle and the BT20 is what gives it Picatinny rails.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the difference between the BT20 and the BT20-B?\u003c\/b\u003e\u003cbr\u003eThe BT20 is the three-piece rail set, while the BT20-B is the bottom rail only, supplied with blind threaded holes for adaption and custom mounting work.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs there a version with a quick-detach lever already fitted?\u003c\/b\u003e\u003cbr\u003eYes — the BT43 leveraged rail is the BT20-B bottom rail supplied with an ADM-170-S lever mount already installed.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains three 1913 Picatinny rails for the BT19 spigot, with fixings.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345967747446,"sku":"BT20","price":59.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt20-aais-1913-rail-set-1.jpg?v=1786217460"},{"product_id":"atlas-bipod-bt20-b-aais-bottom-rail","title":"Atlas Bipod BT20-B AAIS Bottom Rail","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT20-B AAIS Bottom Rail\u003c\/b\u003e, part number BT20-B from B\u0026amp;T Industries, is the MIL-STD-1913 bottom rail only for the BT19 Accuracy International spigot. It is the same rail found on the BT21 TRG bracket, supplied with blind threaded holes for adaption work and custom mounting solutions.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT20-B is one rail; the \u003ca href=\"\/products\/atlas-bipod-bt20-aais-1913-rail-set\"\u003eAtlas BT20 AAIS 1913 rail set\u003c\/a\u003e is the full three-piece set for the spigot. The \u003ca href=\"\/products\/atlas-bipod-bt43-leveraged-rail\"\u003eAtlas BT43 leveraged rail\u003c\/a\u003e is this bottom rail supplied with an ADM-170-S lever already installed, which is the ready-made quick-detach version. The same rail appears built into the \u003ca href=\"\/products\/atlas-bipod-bt21-trg-bracket\"\u003eAtlas BT21 Sako TRG bracket\u003c\/a\u003e. The spigot itself is the \u003ca href=\"\/products\/atlas-bipod-bt19-accuracy-international-spigot-aais\"\u003eAtlas BT19 Accuracy International spigot\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGunsmiths and stockers building a custom mounting solution\u003c\/li\u003e\n\u003cli\u003eAccuracy International owners who need only the bottom rail\u003c\/li\u003e\n\u003cli\u003eAdaption work where blind threaded holes are wanted rather than through holes\u003c\/li\u003e\n\u003cli\u003eReplacing or duplicating the rail found on the BT21 TRG bracket\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e 1913 Picatinny bottom rail for the BT19 AAIS spigot\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHoles:\u003c\/b\u003e Blind threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAlso found on:\u003c\/b\u003e The BT21 Sako TRG bracket uses the same rail\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLever version:\u003c\/b\u003e The BT43 leveraged rail is this rail with an ADM-170-S lever installed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1913 Picatinny bottom rail for BT19 AAIS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHoles\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBlind threaded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRelated Parts\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT20 three-piece rail set; BT43 leveraged rail; BT21 TRG bracket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT20-B \/ BT20-B \/ 810040220265\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT20-B bottom rail\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas rail is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the Atlas BT20-B?\u003c\/b\u003e\u003cbr\u003eThe BT20-B is the 1913 Picatinny bottom rail for the BT19 Accuracy International spigot, supplied on its own with blind threaded holes rather than as part of a set.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the difference between the BT20-B and the BT20?\u003c\/b\u003e\u003cbr\u003eThe BT20-B is the bottom rail only, while the BT20 is the three-piece AAIS rail set that adds full 1913 rail capability to the BT19 spigot.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhy would I choose the BT20-B rather than the BT43?\u003c\/b\u003e\u003cbr\u003eThe BT43 is the same bottom rail supplied with an ADM-170-S lever already installed, so choose the BT20-B when you are doing adaption work and do not want the lever, and the BT43 when you want a ready-made quick-detach interface.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs this the same rail as on the BT21 TRG bracket?\u003c\/b\u003e\u003cbr\u003eYes — the BT21 Sako TRG bracket incorporates the same 1913 bottom rail that is sold separately as the BT20-B.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT20-B AAIS bottom rail.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345967812982,"sku":"BT20-B","price":29.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt20-b-aais-bottom-rail-1.jpg?v=1786216285"},{"product_id":"atlas-bipod-bt21-trg-bracket","title":"Atlas Bipod BT21 TRG Bracket","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT21 TRG Bracket\u003c\/b\u003e, part number BT21 from B\u0026amp;T Industries, mounts Atlas bipods to the Sako TRG. It incorporates the 1913 Picatinny bottom rail that is also sold separately as the BT20-B, so two-screw and ADM lever-mount bipods clamp straight on.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe BT21 is TRG-specific. The rail it carries is sold on its own as the \u003ca href=\"\/products\/atlas-bipod-bt20-b-aais-bottom-rail\"\u003eAtlas BT20-B AAIS bottom rail\u003c\/a\u003e. For a rear monopod on the same rifle, the \u003ca href=\"\/products\/accu-shot-bt29-sako-trg-rail-kit\"\u003eAccu-Shot BT29 Sako TRG rail kit\u003c\/a\u003e adds monopod rail mounting and is compatible with the BT12-QK specifically. Bipods to go on it are in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e, and the wider selection is in our \u003ca href=\"\/collections\/rifle-bipods\"\u003eUK rifle bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSako TRG rifles used for deer stalking and long-range work\u003c\/li\u003e\n\u003cli\u003eTarget, F-Class and practical rifle on a TRG\u003c\/li\u003e\n\u003cli\u003eAdding Atlas bipod mounting without a general-purpose rail\u003c\/li\u003e\n\u003cli\u003eTRG owners running a two-screw or ADM lever bipod\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Bipod bracket with integrated 1913 Picatinny rail\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e Sako TRG\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRail:\u003c\/b\u003e Incorporates the same bottom rail sold separately as the BT20-B\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTakes:\u003c\/b\u003e Two-screw and ADM lever-mount Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eTRG bipod bracket with 1913 Picatinny rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSako TRG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRail\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSame bottom rail as the BT20-B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eAccepts\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-screw and ADM lever-mount Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT21 \/ BT21 \/ 810040220425\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT21 TRG bracket with fixings\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas bracket is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich rifle does the Atlas BT21 bracket fit?\u003c\/b\u003e\u003cbr\u003eThe BT21 bracket is made for the Sako TRG.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich bipods will mount to the Atlas BT21?\u003c\/b\u003e\u003cbr\u003eThe BT21 incorporates a 1913 Picatinny rail, so two-screw and ADM lever-mount Atlas bipods clamp straight onto it, as will any other Picatinny-mount bipod.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the rail on the BT21 the same as the BT20-B?\u003c\/b\u003e\u003cbr\u003eYes — the BT21 incorporates the same 1913 bottom rail that B\u0026amp;T sell separately as the BT20-B.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow do I add a rear monopod to a Sako TRG?\u003c\/b\u003e\u003cbr\u003eThe Accu-Shot BT29 Sako TRG rail kit adds monopod rail mounting to the TRG and is compatible with the BT12-QK Precision Rail Monopod specifically.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT21 TRG bracket with its fixings.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345967845750,"sku":"BT21","price":59.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt21-trg-bracket-1.jpg?v=1786216433"},{"product_id":"atlas-bipod-bt6569ml-cal-upgrade-mount","title":"Atlas Bipod BT6569ML CAL Upgrade Mount","description":"\u003cp\u003eThe \u003cb\u003eAtlas BT6569ML CAL Upgrade Mount\u003c\/b\u003e, part number BT6569ML from B\u0026amp;T Industries, is the upgrade mount for CAL series Atlas bipods. It is available as a two-screw mount or in No Clamp (NC) form, so a CAL bipod's mounting can be changed after purchase rather than being fixed at the point of sale.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis is the part that lets a CAL bipod move between mount types. The bipods it applies to are the \u003ca href=\"\/products\/atlas-bipod-bt65-cal-with-two-screw-picatinny-mount\"\u003eAtlas BT65 CAL bipod\u003c\/a\u003e, the \u003ca href=\"\/products\/atlas-bipod-bt65-nc-cal-no-clamp\"\u003eAtlas BT65-NC CAL bipod\u003c\/a\u003e, the \u003ca href=\"\/products\/atlas-bipod-bt69-cal-tall-with-two-screw-picatinny-mount\"\u003eAtlas BT69 CAL Tall bipod\u003c\/a\u003e and the \u003ca href=\"\/products\/atlas-bipod-bt69-nc-cal-tall-no-clamp\"\u003eAtlas BT69-NC CAL Tall bipod\u003c\/a\u003e. If you want a quick-detach lever instead, the \u003ca href=\"\/products\/american-defense-adm-170-s-picatinny-lever-mount-atlas-bipod\"\u003eAmerican Defense ADM-170-S Picatinny lever mount\u003c\/a\u003e fits the same 17S-size pattern. The range is in our \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCAL bipod owners changing from a two-screw clamp to No Clamp, or the reverse\u003c\/li\u003e\n\u003cli\u003eShooters moving a CAL bipod to a rifle with a different mounting interface\u003c\/li\u003e\n\u003cli\u003eReplacing a damaged or worn CAL mount\u003c\/li\u003e\n\u003cli\u003eBuilding a CAL bipod around an ARCA or lever clamp of your own\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e CAL series upgrade mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e CAL series Atlas bipods, which is the BT65 and BT69 families\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOptions:\u003c\/b\u003e Available as a two-screw mount or as a No Clamp (NC) style mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePurpose:\u003c\/b\u003e Changes a CAL bipod's mounting type after purchase\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrigin:\u003c\/b\u003e Genuine B\u0026amp;T Industries, LLC — Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eCAL upgrade mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eCAL series Atlas bipods (BT65 and BT69 families)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eStyles\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-screw mount or No Clamp (NC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBipod Mount Pattern\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.100 in (27.9 mm) two-hole, 10\/32 threads — 17S-size\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eB\u0026amp;T Industries, LLC — Made in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eBT6569ML \/ BT6569ML \/ —\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1× Atlas BT6569ML CAL upgrade mount\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied as genuine B\u0026amp;T Industries stock and covered by the manufacturer's warranty — contact our UK team and we will handle any claim on your behalf.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis Atlas mount is dispatched tracked from our UK warehouse — no import duties and no customs delays — and is backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods does the BT6569ML upgrade mount fit?\u003c\/b\u003e\u003cbr\u003eThe BT6569ML fits the CAL series Atlas bipods, which is the BT65 and BT65-NC at standard height and the BT69 and BT69-NC in CAL Tall form.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat mount styles is the BT6569ML available in?\u003c\/b\u003e\u003cbr\u003eThe BT6569ML is available as a two-screw mount or as a No Clamp (NC) style mount.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eCan I convert a two-screw CAL bipod to No Clamp with this?\u003c\/b\u003e\u003cbr\u003eThe BT6569ML is B\u0026amp;T's upgrade mount for the CAL series and is offered in both styles, which is what allows a CAL bipod's mounting type to be changed after purchase.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the BT6569ML fit a V8, PSR, Super CAL or 5-H bipod?\u003c\/b\u003e\u003cbr\u003eNo — the BT6569ML is a CAL series part for the BT65 and BT69 families, and the other Atlas series use their own mounts.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is in the box?\u003c\/b\u003e\u003cbr\u003eThe box contains one Atlas BT6569ML CAL upgrade mount.\u003c\/p\u003e","brand":"B\u0026T Industries","offers":[{"title":"Default Title","offer_id":58345967976822,"sku":"BT6569ML","price":34.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/atlas-bipod-bt6569ml-cal-upgrade-mount-1.jpg?v=1786216432"},{"product_id":"american-defense-adm-170-s-picatinny-lever-mount-atlas-bipod","title":"American Defense ADM-170-S Picatinny Lever Mount for Atlas Bipods – ADM-170-S","description":"\u003cp\u003eThe \u003cb\u003eAmerican Defense ADM-170-S Picatinny Rail Lever Mount\u003c\/b\u003e, part number \u003cb\u003eADM-170-S\u003c\/b\u003e, is the quick-detach lever mount used across the B\u0026amp;T Industries Atlas bipod range. Fitted to an NC (No Clamp) Atlas bipod it clamps the bipod to any MIL-STD-1913 Picatinny rail with a tool-free lever, and it is the same mount supplied on the LW17 model Atlas bipods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis is the part that turns a bare Atlas into a quick-detach one. It fits the NC (No Clamp) Atlas bipods — \u003ca href=\"\/products\/atlas-bipod-bt10-nc-v8-no-clamp\"\u003eAtlas BT10-NC V8\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt46-nc-psr-no-clamp\"\u003eAtlas BT46-NC PSR\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt47-nc-psr-tall-no-clamp\"\u003eAtlas BT47-NC PSR Tall\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt65-nc-cal-no-clamp\"\u003eAtlas BT65-NC CAL\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt69-nc-cal-tall-no-clamp\"\u003eAtlas BT69-NC CAL Tall\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt72-nc-super-cal-no-clamp\"\u003eAtlas BT72-NC Super CAL\u003c\/a\u003e — and is the mount already fitted to the LW17 models such as \u003ca href=\"\/products\/atlas-bipod-bt10-lw17-v8-with-adm-170-s-lever-qd-mount\"\u003eAtlas BT10-LW17 V8\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt46-lw17-psr-with-adm-170-s-lever-qd-mount\"\u003eAtlas BT46-LW17 PSR\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt65-lw17-cal-with-adm-170-s-lever-qd-mount\"\u003eAtlas BT65-LW17 CAL\u003c\/a\u003e, \u003ca href=\"\/products\/atlas-bipod-bt72-lw17-super-cal-with-adm-170-s-lever-qd-mount\"\u003eAtlas BT72-LW17 Super CAL\u003c\/a\u003e, so buying it separately is how you convert a bipod you already own or replace a lost lever. The Atlas 5-H is the exception: it takes the dedicated \u003ca href=\"\/products\/american-defense-adm-5-h-picatinny-lever-mount-atlas-5-h-bipod\"\u003eADM-5-H lever mount\u003c\/a\u003e. If your rifle has an ARCA forend rather than Picatinny, use the \u003ca href=\"\/products\/american-defense-adm-qd-arca-rail-lever-mount-atlas-bipod\"\u003eADM QD ARCA Rail Lever Mount\u003c\/a\u003e, and \u003ca href=\"\/products\/area-419-arcalock-qd-clamp-atlas-bipod\"\u003eArea 419 ARCALOCK QD Clamp\u003c\/a\u003e is the Area 419 alternative. Browse the \u003ca href=\"\/collections\/atlas-bipods\"\u003efull Atlas bipod range\u003c\/a\u003e, \u003ca href=\"\/collections\/b-t-industries\"\u003eB\u0026amp;T Industries collection\u003c\/a\u003e and \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod clamps, rails and spares\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConverting an NC (No Clamp) Atlas bipod to quick-detach for travel and cleaning\u003c\/li\u003e\n\u003cli\u003eMoving one Atlas bipod between a stalking rifle and a target rifle\u003c\/li\u003e\n\u003cli\u003eCivilian Service Rifle and practical rifle, where the bipod comes off between stages\u003c\/li\u003e\n\u003cli\u003eReplacing a damaged or lost Atlas lever mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Picatinny rail lever mount for Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e NC (No Clamp) Atlas bipods: V8, PSR, CAL and Super CAL\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDoes not fit:\u003c\/b\u003e The Atlas 5-H, which takes the dedicated ADM-5-H lever mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRail standard:\u003c\/b\u003e MIL-STD-1913 Picatinny\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTension:\u003c\/b\u003e Adjustable clamping nut so the lever closes firmly on your specific rail\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOperation:\u003c\/b\u003e Tool-free quick-detach lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAlso supplied on:\u003c\/b\u003e LW17 model Atlas bipods\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePicatinny rail lever mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNC Atlas bipods: V8, PSR, CAL, Super CAL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAmerican Defense Manufacturing (USA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eADM-170-S \/ ADM-170-S \/ 810040220654\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × ADM-170-S lever mount (ADM-170-S)\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied with the manufacturer's warranty, with any claim handled by our UK team.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eEvery order is dispatched tracked from our UK warehouse, so there are no import duties or customs surprises, and you are backed by UK-based aftersales support from our team.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods does the ADM-170-S fit?\u003c\/b\u003e\u003cbr\u003eIt fits the NC (No Clamp) Atlas bipods: the V8, PSR, PSR Tall, CAL, CAL Tall and Super CAL. It is also the lever mount fitted as standard to the LW17 versions of those bipods.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the ADM-170-S fit the Atlas 5-H?\u003c\/b\u003e\u003cbr\u003eNo. The Atlas 5-H uses the dedicated ADM-5-H lever mount, which is a different part and is not interchangeable with the ADM-170-S.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat rail does the ADM-170-S clamp to?\u003c\/b\u003e\u003cbr\u003eA MIL-STD-1913 Picatinny rail. The clamping nut is adjustable so the lever can be set to close firmly on your particular rail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eCan I fit the ADM-170-S myself?\u003c\/b\u003e\u003cbr\u003eYes. It bolts to the bipod using the supplied hardware, and once fitted the bipod attaches and releases from the rail by lever without tools.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the ADM-170-S work on an ARCA rail?\u003c\/b\u003e\u003cbr\u003eNo. It is a Picatinny lever mount. For an ARCA forend rail, use the American Defense ADM QD ARCA Rail Lever Mount instead.\u003c\/p\u003e","brand":"American Defense Mfg.","offers":[{"title":"Default Title","offer_id":58345969549686,"sku":"ADM-170-S","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/american-defense-adm-170-s-picatinny-lever-mount-atlas-bipod-1.jpg?v=1786213827"},{"product_id":"american-defense-adm-5-h-picatinny-lever-mount-atlas-5-h-bipod","title":"American Defense ADM-5-H Picatinny Lever Mount for Atlas 5-H Bipod – ADM-5-H","description":"\u003cp\u003eThe \u003cb\u003eAmerican Defense ADM-5-H Picatinny Rail Lever Mount\u003c\/b\u003e, part number \u003cb\u003eADM-5-H\u003c\/b\u003e, is the dedicated quick-detach lever mount for the 5-H model B\u0026amp;T Industries Atlas bipod, clamping it to any MIL-STD-1913 Picatinny rail with a tool-free lever. It is the same lever QD mount fitted to the BT35-LW17.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe 5-H has its own mounting pattern, which is why this part exists as a separate item. It fits the \u003ca href=\"\/products\/atlas-bipod-bt35-nc-5-h-no-clamp\"\u003eAtlas BT35-NC 5-H No Clamp\u003c\/a\u003e, and it is the lever QD mount already fitted to the \u003ca href=\"\/products\/atlas-bipod-bt35-lw17-5-h-with-adm-4103la74-5-h-lever-qd-mount\"\u003eAtlas BT35-LW17 5-H\u003c\/a\u003e. Every other Atlas — V8, PSR, CAL and Super CAL — takes the \u003ca href=\"\/products\/american-defense-adm-170-s-picatinny-lever-mount-atlas-bipod\"\u003eADM-170-S lever mount\u003c\/a\u003e instead; the two are not interchangeable. For an ARCA forend rail see the \u003ca href=\"\/products\/american-defense-adm-qd-arca-rail-lever-mount-atlas-bipod\"\u003eADM QD ARCA Rail Lever Mount\u003c\/a\u003e, or \u003ca href=\"\/products\/area-419-arcalock-qd-clamp-atlas-bipod\"\u003ethe ARCALOCK QD Clamp\u003c\/a\u003e from Area 419. Browse the \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e, \u003ca href=\"\/collections\/b-t-industries\"\u003eB\u0026amp;T Industries collection\u003c\/a\u003e and \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod clamps and spares\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConverting an Atlas BT35-NC 5-H to quick-detach\u003c\/li\u003e\n\u003cli\u003eMoving a 5-H between rifles without tools\u003c\/li\u003e\n\u003cli\u003eRemoving the bipod for transit, cleaning or a lockable case\u003c\/li\u003e\n\u003cli\u003eReplacing a damaged or lost 5-H lever mount\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e Picatinny rail lever mount for the Atlas 5-H\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e 5-H model Atlas bipod only\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDoes not fit:\u003c\/b\u003e V8, PSR, CAL and Super CAL Atlas bipods, which take the ADM-170-S\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRail standard:\u003c\/b\u003e MIL-STD-1913 Picatinny\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTension:\u003c\/b\u003e Adjustable clamping tension\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOperation:\u003c\/b\u003e Tool-free quick-detach lever\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePicatinny rail lever mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e5-H model Atlas bipod only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAmerican Defense Manufacturing (USA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eADM-5-H \/ ADM-5-H \/ 810040220661\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × ADM-5-H lever mount (ADM-5-H)\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied with the manufacturer's warranty, with any claim handled by our UK team.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eEvery order is dispatched tracked from our UK warehouse, so there are no import duties or customs surprises, and you are backed by UK-based aftersales support from our team.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich Atlas bipods does the ADM-5-H fit?\u003c\/b\u003e\u003cbr\u003eThe 5-H model Atlas bipod only, including the BT35-NC No Clamp version. It is the same lever QD mount fitted to the BT35-LW17.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the ADM-5-H fit other Atlas bipods?\u003c\/b\u003e\u003cbr\u003eNo. The V8, PSR, CAL and Super CAL Atlas bipods use the ADM-170-S lever mount. The ADM-5-H and the ADM-170-S are different parts and are not interchangeable.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat rail does the ADM-5-H clamp to?\u003c\/b\u003e\u003cbr\u003eA MIL-STD-1913 Picatinny rail, with adjustable clamping tension so the lever closes firmly on your particular rail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDo I need tools to use the ADM-5-H once fitted?\u003c\/b\u003e\u003cbr\u003eNo. Once bolted to the bipod, the mount attaches to and releases from the rail using the lever alone.\u003c\/p\u003e","brand":"American Defense Mfg.","offers":[{"title":"Default Title","offer_id":58345969582454,"sku":"ADM-5-H","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/american-defense-adm-5-h-picatinny-lever-mount-atlas-5-h-bipod-1.jpg?v=1786218034"},{"product_id":"american-defense-adm-qd-arca-rail-lever-mount-atlas-bipod","title":"American Defense ADM QD ARCA Rail Lever Mount for Atlas Bipods – ADM-QD-ARCA","description":"\u003cp\u003eThe \u003cb\u003eAmerican Defense ADM QD ARCA Rail Lever Mount\u003c\/b\u003e, part number \u003cb\u003eADM-QD-ARCA\u003c\/b\u003e, fits an NC (No Clamp) B\u0026amp;T Industries Atlas bipod to an ARCA rail with a tool-free quick-detach lever — the ARCA counterpart to the ADM-170-S Picatinny mount.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eARCA forends let you slide the bipod fore and aft to balance the rifle, which a Picatinny slot does not. This mount puts an NC Atlas such as the \u003ca href=\"\/products\/atlas-bipod-bt10-nc-v8-no-clamp\"\u003eAtlas BT10-NC V8\u003c\/a\u003e or \u003ca href=\"\/products\/atlas-bipod-bt46-nc-psr-no-clamp\"\u003eAtlas BT46-NC PSR\u003c\/a\u003e onto that rail with a lever rather than a screw clamp. For a Picatinny forend use the \u003ca href=\"\/products\/american-defense-adm-170-s-picatinny-lever-mount-atlas-bipod\"\u003eADM-170-S Picatinny lever mount\u003c\/a\u003e, and for the Atlas 5-H the \u003ca href=\"\/products\/american-defense-adm-5-h-picatinny-lever-mount-atlas-5-h-bipod\"\u003eADM-5-H lever mount\u003c\/a\u003e. Area 419's \u003ca href=\"\/products\/area-419-arcalock-qd-clamp-atlas-bipod\"\u003eARCALOCK QD Clamp\u003c\/a\u003e is the alternative ARCA answer. Browse the \u003ca href=\"\/collections\/arca-bipods\"\u003eARCA bipods and clamps\u003c\/a\u003e, \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e and \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod clamps, rails and adapters\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eARCA-railed precision rifle chassis running an Atlas bipod\u003c\/li\u003e\n\u003cli\u003eSliding the bipod along the forend to balance the rifle for prone or barricade work\u003c\/li\u003e\n\u003cli\u003eLong-range and PRS-style shooting where the bipod position changes between stages\u003c\/li\u003e\n\u003cli\u003eRemoving the bipod for transit or cleaning without tools\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eType:\u003c\/b\u003e ARCA rail lever mount for Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e NC (No Clamp) Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRail standard:\u003c\/b\u003e ARCA rail\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOperation:\u003c\/b\u003e Tool-free quick-detach lever\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e Clamps anywhere along the ARCA rail so the bipod can be slid fore and aft\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eARCA rail lever mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNC Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAmerican Defense Manufacturing (USA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eADM-QD-ARCA \/ ADM-QD-ARCA \/ —\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1 × ADM QD ARCA lever mount\u003c\/li\u003e\n\u003cli\u003eMounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eSupplied with the manufacturer's warranty, with any claim handled by our UK team.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eEvery order is dispatched tracked from our UK warehouse, so there are no import duties or customs surprises, and you are backed by UK-based aftersales support from our team.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich bipods does the ADM QD ARCA Rail Lever Mount fit?\u003c\/b\u003e\u003cbr\u003eNC (No Clamp) Atlas bipods. It replaces the clamp on a bare Atlas so the bipod mounts to an ARCA rail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the ADM QD ARCA Rail Lever Mount work on a Picatinny rail?\u003c\/b\u003e\u003cbr\u003eNo. It is an ARCA interface. For a Picatinny forend use the American Defense ADM-170-S Picatinny lever mount instead.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhy choose an ARCA mount over Picatinny?\u003c\/b\u003e\u003cbr\u003eAn ARCA rail lets the bipod be clamped anywhere along its length rather than in fixed slots, so the bipod can be slid fore and aft to balance the rifle or to suit a barricade.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the ADM QD ARCA Rail Lever Mount need tools?\u003c\/b\u003e\u003cbr\u003eIt bolts to the bipod with the supplied hardware, after which the bipod attaches to and releases from the ARCA rail using the lever alone.\u003c\/p\u003e","brand":"American Defense Mfg.","offers":[{"title":"Default Title","offer_id":58345969615222,"sku":"ADM-QD-ARCA","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/american-defense-adm-qd-arca-rail-lever-mount-atlas-bipod-1.jpg?v=1786213816"},{"product_id":"area-419-arcalock-clamp-atlas-bipod","title":"Area 419 ARCALOCK Clamp for Atlas Bipods","description":"\u003cp\u003eThe \u003cb\u003eArea 419 ARCALOCK Clamp for Atlas Bipods\u003c\/b\u003e (stock code ARCALOCK Clamp, UPC 853675008860) is an ARCA-Swiss rail clamp that mounts a no-clamp Atlas bipod to an ARCA dovetail. It tensions with a black knob and indexes on Area 419's spring-loaded ARCALOCK locking pins, so the bipod is held by positive mechanical stops rather than clamping friction alone.\u003c\/p\u003e\u003cp\u003eAtlas bipods leave the factory on a two-screw Picatinny mount, on an American Defense lever mount, or as an NC \"No Clamp\" body with no mount fitted. None of them is natively ARCA. If your chassis or forend carries an ARCA dovetail, a clamp like this one is what joins the two.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis is the knob-tensioned ARCALOCK clamp: lighter and lower than the lever versions, and the one to choose if the bipod stays on the rifle. For quick-detach between stages, take the \u003ca href=\"\/products\/area-419-arcalock-qd-clamp-atlas-bipod\"\u003eArea 419 ARCALOCK QD lever clamp\u003c\/a\u003e. To cover ARCA and Picatinny rifles with one clamp, take the \u003ca href=\"\/products\/area-419-arcalock-dual-clamp-picatinny-atlas-bipod\"\u003eArea 419 ARCALOCK Dual-Clamp with Picatinny\u003c\/a\u003e or the \u003ca href=\"\/products\/really-right-stuff-btc-pro-dual-arca-pic-clamp\"\u003eReally Right Stuff BTC-Pro dual ARCA and Picatinny clamp\u003c\/a\u003e. You will need an NC-bodied bipod such as the \u003ca href=\"\/products\/atlas-bipod-bt10-nc-v8-no-clamp\"\u003eAtlas BT10-NC V8\u003c\/a\u003e or \u003ca href=\"\/products\/atlas-bipod-bt65-nc-cal-no-clamp\"\u003eAtlas BT65-NC CAL\u003c\/a\u003e — see the full \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e. If you would rather buy a bipod that is ARCA from the outset, the \u003ca href=\"\/collections\/accu-tac\"\u003eAccu-Tac Arca-Spec range\u003c\/a\u003e and our wider \u003ca href=\"\/collections\/arca-bipods\"\u003eARCA bipods\u003c\/a\u003e do exactly that.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eF Class and benchrest shooters running an ARCA-railed forend\u003c\/li\u003e\n\u003cli\u003ePractical and precision rifle competitors who want a fixed, low, rock-solid bipod interface\u003c\/li\u003e\n\u003cli\u003eDeer stalkers with an ARCA rail who need the bipod to stay put in the field\u003c\/li\u003e\n\u003cli\u003eAnyone who already owns an NC \"No Clamp\" Atlas bipod and needs an ARCA mount for it\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eInterface:\u003c\/b\u003e ARCA-Swiss dovetail rail clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamping:\u003c\/b\u003e Black tensioning knob, hand-tightened\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRetention:\u003c\/b\u003e Area 419 ARCALOCK spring-loaded locking pins index the clamp into ARCALOCK-compatible rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e NC \"No Clamp\" Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e Area 419, made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSupplied:\u003c\/b\u003e Clamp with its mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eARCA-Swiss rail clamp with knob tensioning and locking pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRail Standard\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eARCA-Swiss dovetail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLocking\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eARCALOCK spring-loaded locking pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNC \"No Clamp\" Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand \/ Origin\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eArea 419 (USA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eARCALOCK Clamp \/ ARCALOCK Clamp \/ 853675008860\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1 × Area 419 ARCALOCK clamp with mounting hardware\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis clamp is UK-stocked and dispatched tracked from our UK warehouse — no import duties and no customs delays — backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich bipods does the Area 419 ARCALOCK Clamp fit?\u003c\/b\u003e\u003cbr\u003eThe Area 419 ARCALOCK Clamp fits NC \"No Clamp\" Atlas bipods, which are supplied by B\u0026amp;T Industries without a mount so that the buyer can choose their own clamp.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat rail standard does the Area 419 ARCALOCK Clamp attach to?\u003c\/b\u003e\u003cbr\u003eThe Area 419 ARCALOCK Clamp attaches to an ARCA-Swiss dovetail rail. It is not a Picatinny clamp; for Picatinny you need the ARCALOCK Dual-Clamp with Picatinny or the Really Right Stuff BTC-Pro.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat do the ARCALOCK locking pins actually do?\u003c\/b\u003e\u003cbr\u003eThe ARCALOCK locking pins are spring-loaded stops that drop into the recesses of an ARCALOCK-compatible rail, so the clamp is held in place by a positive mechanical lock and cannot creep along the rail under recoil.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eShould I choose the knob clamp or the QD lever clamp?\u003c\/b\u003e\u003cbr\u003eChoose the knob clamp if the bipod lives on the rifle, because it is lighter, lower and has nothing to snag. Choose the ARCALOCK QD lever clamp if you take the bipod on and off frequently, for example between stages of a match.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre Atlas bipods ARCA without a clamp like this?\u003c\/b\u003e\u003cbr\u003eNo. Atlas bipods are supplied with a two-screw Picatinny mount, with an American Defense lever mount, or as an NC \"No Clamp\" body, so ARCA mounting always comes from a separate clamp such as this one.\u003c\/p\u003e","brand":"Area 419","offers":[{"title":"Default Title","offer_id":58345969746294,"sku":"ARCALOCK Clamp","price":85.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/area-419-arcalock-clamp-atlas-bipod-1.jpg?v=1786219706"},{"product_id":"area-419-arcalock-qd-clamp-atlas-bipod","title":"Area 419 ARCALOCK QD Clamp for Atlas Bipods","description":"\u003cp\u003eThe \u003cb\u003eArea 419 ARCALOCK QD Clamp for Atlas Bipods\u003c\/b\u003e (stock code ARCALOCK QD Clamp) is a quick-detach ARCA-Swiss rail clamp for no-clamp Atlas bipods. A throw lever replaces the tensioning knob, and Area 419's spring-loaded ARCALOCK locking pins index the clamp into the rail, so the bipod comes off and goes back on in a couple of seconds without losing its position.\u003c\/p\u003e\u003cp\u003eAtlas bipods leave the factory on a two-screw Picatinny mount, on an American Defense lever mount, or as an NC \"No Clamp\" body with no mount fitted. None of them is natively ARCA, so on an ARCA-railed chassis or forend a clamp like this one is what joins the two.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis is the lever version: the fastest of the ARCA-only ARCALOCK clamps, at the cost of a little extra height and weight over the knob. If the bipod stays on the rifle, the \u003ca href=\"\/products\/area-419-arcalock-clamp-atlas-bipod\"\u003eArea 419 ARCALOCK knob clamp\u003c\/a\u003e is lighter and lower. To cover ARCA and Picatinny rifles with a single clamp, take the \u003ca href=\"\/products\/area-419-arcalock-dual-clamp-picatinny-atlas-bipod\"\u003eArea 419 ARCALOCK Dual-Clamp with Picatinny\u003c\/a\u003e or the \u003ca href=\"\/products\/really-right-stuff-btc-pro-dual-arca-pic-clamp\"\u003eReally Right Stuff BTC-Pro dual ARCA and Picatinny clamp\u003c\/a\u003e. For a lever mount from a different maker, see the \u003ca href=\"\/products\/american-defense-adm-qd-arca-rail-lever-mount-atlas-bipod\"\u003eAmerican Defense ADM QD ARCA rail lever mount\u003c\/a\u003e. You will need an NC-bodied bipod such as the \u003ca href=\"\/products\/atlas-bipod-bt46-nc-psr-no-clamp\"\u003eAtlas BT46-NC PSR\u003c\/a\u003e from the \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e, or start instead with a natively ARCA bipod from the \u003ca href=\"\/collections\/accu-tac\"\u003eAccu-Tac Arca-Spec range\u003c\/a\u003e or our wider \u003ca href=\"\/collections\/arca-bipods\"\u003eARCA bipods\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePractical and precision rifle competitors stripping the bipod off between stages\u003c\/li\u003e\n\u003cli\u003eF Class and benchrest shooters moving one bipod between several ARCA-railed rifles\u003c\/li\u003e\n\u003cli\u003eDeer stalkers who want the bipod off for the stalk and on for the shot\u003c\/li\u003e\n\u003cli\u003eOwners of NC \"No Clamp\" Atlas bipods who want quick-detach ARCA mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eInterface:\u003c\/b\u003e ARCA-Swiss dovetail rail clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamping:\u003c\/b\u003e Quick-detach throw lever, no tools required\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRetention:\u003c\/b\u003e Area 419 ARCALOCK spring-loaded locking pins index the clamp into ARCALOCK-compatible rails\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e NC \"No Clamp\" Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e Area 419, made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSupplied:\u003c\/b\u003e Clamp with its mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eARCA-Swiss rail clamp with quick-detach lever and locking pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRail Standard\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eARCA-Swiss dovetail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLocking\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eARCALOCK spring-loaded locking pins\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNC \"No Clamp\" Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand \/ Origin\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eArea 419 (USA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eARCALOCK QD Clamp \/ ARCALOCK QD Clamp \/ —\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1 × Area 419 ARCALOCK QD clamp with mounting hardware\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis clamp is UK-stocked and dispatched tracked from our UK warehouse — no import duties and no customs delays — backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich bipods does the Area 419 ARCALOCK QD Clamp fit?\u003c\/b\u003e\u003cbr\u003eThe Area 419 ARCALOCK QD Clamp fits NC \"No Clamp\" Atlas bipods, which are supplied by B\u0026amp;T Industries without a mount so that the buyer can choose their own clamp.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWill the Area 419 ARCALOCK QD Clamp fit a Picatinny rail?\u003c\/b\u003e\u003cbr\u003eNo. The Area 419 ARCALOCK QD Clamp is an ARCA-Swiss clamp only. For Picatinny as well, choose the Area 419 ARCALOCK Dual-Clamp with Picatinny or the Really Right Stuff BTC-Pro.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat is the difference between the QD lever clamp and the knob clamp?\u003c\/b\u003e\u003cbr\u003eThe QD version uses a throw lever, so the bipod can be removed and refitted in seconds without tools, while the knob version is hand-tightened and is lighter and lower on the rifle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat do the ARCALOCK locking pins do?\u003c\/b\u003e\u003cbr\u003eThe ARCALOCK locking pins are spring-loaded stops that drop into the recesses of an ARCALOCK-compatible rail, giving a positive mechanical lock so the clamp cannot creep along the rail under recoil.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre Atlas bipods ARCA without a clamp like this?\u003c\/b\u003e\u003cbr\u003eNo. Atlas bipods are supplied with a two-screw Picatinny mount, with an American Defense lever mount, or as an NC \"No Clamp\" body, so ARCA mounting always comes from a separate clamp such as this one.\u003c\/p\u003e","brand":"Area 419","offers":[{"title":"Default Title","offer_id":58345969779062,"sku":"ARCALOCK QD Clamp","price":140.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/area-419-arcalock-qd-clamp-atlas-bipod-1.jpg?v=1785369082"},{"product_id":"area-419-arcalock-dual-clamp-picatinny-atlas-bipod","title":"Area 419 ARCALOCK Dual-Clamp with Picatinny for Atlas Bipods","description":"\u003cp\u003eThe \u003cb\u003eArea 419 ARCALOCK Dual-Clamp with Picatinny for Atlas Bipods\u003c\/b\u003e (stock code ARCALOCK Dual-Clamp) is a single lever clamp that mounts a no-clamp Atlas bipod to either an ARCA-Swiss dovetail or a 1913 Picatinny rail. An ON\/OFF ARCALOCK switch engages or disengages Area 419's spring-loaded locking pins, so the same clamp can index positively on an ARCALOCK rail or clamp conventionally on a plain rail.\u003c\/p\u003e\u003cp\u003eAtlas bipods leave the factory on a two-screw Picatinny mount, on an American Defense lever mount, or as an NC \"No Clamp\" body with no mount fitted. None of them is natively ARCA, so this is the clamp to buy if some of your rifles wear ARCA rails and others wear Picatinny and you want one bipod to serve them all.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis is the most versatile of the Area 419 clamps, and the heaviest. For ARCA only, the \u003ca href=\"\/products\/area-419-arcalock-qd-clamp-atlas-bipod\"\u003eArea 419 ARCALOCK QD lever clamp\u003c\/a\u003e is faster to fit and the \u003ca href=\"\/products\/area-419-arcalock-clamp-atlas-bipod\"\u003eArea 419 ARCALOCK knob clamp\u003c\/a\u003e is lighter and lower. The \u003ca href=\"\/products\/really-right-stuff-btc-pro-dual-arca-pic-clamp\"\u003eReally Right Stuff BTC-Pro dual ARCA and Picatinny clamp\u003c\/a\u003e covers the same two rail standards with a knob instead of a lever. For a Picatinny-only mount that also slides, see the \u003ca href=\"\/products\/arisaka-picatinny-rail-slider-atlas-bipod\"\u003eArisaka Picatinny rail slider\u003c\/a\u003e. You will need an NC-bodied bipod such as the \u003ca href=\"\/products\/atlas-bipod-bt10-nc-v8-no-clamp\"\u003eAtlas BT10-NC V8\u003c\/a\u003e from the \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e, or a natively ARCA bipod from the \u003ca href=\"\/collections\/accu-tac\"\u003eAccu-Tac Arca-Spec range\u003c\/a\u003e and our wider \u003ca href=\"\/collections\/arca-bipods\"\u003eARCA bipods\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eShooters running one bipod across both ARCA-railed and Picatinny-railed rifles\u003c\/li\u003e\n\u003cli\u003ePractical and precision rifle competitors who borrow or swap rifles between stages\u003c\/li\u003e\n\u003cli\u003eDeer stalkers moving a bipod between a stalking rifle and a target rifle\u003c\/li\u003e\n\u003cli\u003eOwners of NC \"No Clamp\" Atlas bipods who do not want to commit to one rail standard\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eInterface:\u003c\/b\u003e Dual ARCA-Swiss dovetail and 1913 Picatinny rail clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamping:\u003c\/b\u003e Throw lever, no tools required\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRetention:\u003c\/b\u003e ON\/OFF ARCALOCK switch engages or disengages the spring-loaded locking pins\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e NC \"No Clamp\" Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e Area 419, made in the USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSupplied:\u003c\/b\u003e Clamp with its mounting hardware\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eDual ARCA-Swiss and Picatinny lever clamp\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRail Standards\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eARCA-Swiss dovetail and 1913 Picatinny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLocking\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eARCALOCK spring-loaded locking pins with ON\/OFF switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNC \"No Clamp\" Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand \/ Origin\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eArea 419 (USA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eARCALOCK Dual-Clamp \/ ARCALOCK Dual-Clamp \/ —\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1 × Area 419 ARCALOCK Dual-Clamp with mounting hardware\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis clamp is UK-stocked and dispatched tracked from our UK warehouse — no import duties and no customs delays — backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eDoes the Area 419 ARCALOCK Dual-Clamp really fit both rail types?\u003c\/b\u003e\u003cbr\u003eYes. The Area 419 ARCALOCK Dual-Clamp has a jaw profile that clamps both ARCA-Swiss dovetails and 1913 Picatinny rails, so one clamp covers rifles built to either standard.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the ON\/OFF ARCALOCK switch do?\u003c\/b\u003e\u003cbr\u003eThe ON\/OFF switch engages or disengages the spring-loaded ARCALOCK locking pins, so you can use the positive mechanical lock on an ARCALOCK-compatible rail and switch it off when clamping a plain rail.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich bipods does the Area 419 ARCALOCK Dual-Clamp fit?\u003c\/b\u003e\u003cbr\u003eThe Area 419 ARCALOCK Dual-Clamp fits NC \"No Clamp\" Atlas bipods, which are supplied by B\u0026amp;T Industries without a mount so that the buyer can choose their own clamp.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow does it compare with the Really Right Stuff BTC-Pro?\u003c\/b\u003e\u003cbr\u003eBoth clamps cover ARCA-Swiss and 1913 Picatinny, but the Area 419 ARCALOCK Dual-Clamp uses a throw lever and the ARCALOCK locking-pin system, while the Really Right Stuff BTC-Pro is tightened by knob.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre Atlas bipods ARCA without a clamp like this?\u003c\/b\u003e\u003cbr\u003eNo. Atlas bipods are supplied with a two-screw Picatinny mount, with an American Defense lever mount, or as an NC \"No Clamp\" body, so ARCA mounting always comes from a separate clamp such as this one.\u003c\/p\u003e","brand":"Area 419","offers":[{"title":"Default Title","offer_id":58345969811830,"sku":"ARCALOCK Dual-Clamp","price":165.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/area-419-arcalock-dual-clamp-picatinny-atlas-bipod-1.jpg?v=1786219706"},{"product_id":"area-419-arcalock-spigot-extension","title":"Area 419 ARCALOCK Spigot Extension","description":"\u003cp\u003eThe \u003cb\u003eArea 419 ARCALOCK Spigot Extension\u003c\/b\u003e (stock code ARCALOCK Spigot Extension) is a spacer that fits between an ARCA-Swiss rail and an ARCALOCK clamp and moves the bipod 1.25 in (32 mm) further forward. It does not mount a bipod on its own — it is an interface part that buys you forward reach when the rail runs out or when something else is in the way.\u003c\/p\u003e\u003cp\u003eTwo situations call for it: the ARCA rail ends before the point where you actually want the bipod, and a rail-mounted accessory such as a light, a laser or a hand stop occupies the space you wanted. Moving the feet forward also widens the support base, which settles the rifle down on a longer forend.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis is an accessory, not a clamp. It pairs with the \u003ca href=\"\/products\/area-419-arcalock-clamp-atlas-bipod\"\u003eArea 419 ARCALOCK knob clamp\u003c\/a\u003e or the \u003ca href=\"\/products\/area-419-arcalock-qd-clamp-atlas-bipod\"\u003eArea 419 ARCALOCK QD lever clamp\u003c\/a\u003e, both of which mount NC \"No Clamp\" Atlas bipods to an ARCA dovetail. If instead of a fixed forward offset you want continuous adjustment along the rail, the \u003ca href=\"\/products\/arisaka-picatinny-rail-slider-atlas-bipod\"\u003eArisaka Picatinny rail slider\u003c\/a\u003e does that on Picatinny. See the whole \u003ca href=\"\/collections\/area-419\"\u003eArea 419 range\u003c\/a\u003e and the rest of our \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eF Class and benchrest shooters wanting the widest possible support base\u003c\/li\u003e\n\u003cli\u003ePrecision rifle competitors whose ARCA rail stops short of the muzzle end of the forend\u003c\/li\u003e\n\u003cli\u003eRifles where a light, laser or hand stop already occupies the forward rail space\u003c\/li\u003e\n\u003cli\u003eExisting Area 419 ARCALOCK clamp owners adding forward reach\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eFunction:\u003c\/b\u003e Extends the bipod 1.25 in (32 mm) forward of the clamp position\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInterface:\u003c\/b\u003e Fits between an ARCA-Swiss rail and an ARCALOCK clamp\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eUse:\u003c\/b\u003e Requires a separate ARCALOCK clamp — it is not a bipod mount by itself\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBenefit:\u003c\/b\u003e Widens the support base and clears rail-mounted accessories\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e Area 419, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eARCA-Swiss spigot extension, rail-to-clamp interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eExtension\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1.25 in (32 mm) forward\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRail Standard\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eARCA-Swiss dovetail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRequires\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eAn Area 419 ARCALOCK clamp, sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand \/ Origin\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eArea 419 (USA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eARCALOCK Spigot Extension \/ ARCALOCK Spigot Extension \/ —\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1 × Area 419 ARCALOCK spigot extension\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis accessory is UK-stocked and dispatched tracked from our UK warehouse — no import duties and no customs delays — backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat does the Area 419 ARCALOCK Spigot Extension do?\u003c\/b\u003e\u003cbr\u003eThe Area 419 ARCALOCK Spigot Extension sits between an ARCA-Swiss rail and an ARCALOCK clamp and pushes the bipod 1.25 in (32 mm) further forward than the clamp alone would allow.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eCan I mount a bipod with the spigot extension on its own?\u003c\/b\u003e\u003cbr\u003eNo. The Area 419 ARCALOCK Spigot Extension is an interface part and must be used with an Area 419 ARCALOCK clamp, which is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhy would I want the bipod further forward?\u003c\/b\u003e\u003cbr\u003eMoving the bipod forward widens the support base and steadies the rifle, and it lets you place the bipod past the end of a short ARCA rail or clear of a light, laser or hand stop already fitted to the forend.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow far forward does it move the bipod?\u003c\/b\u003e\u003cbr\u003eThe Area 419 ARCALOCK Spigot Extension moves the bipod 1.25 inches, which is approximately 32 millimetres, forward of its normal clamped position.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich rail standard does it work with?\u003c\/b\u003e\u003cbr\u003eThe Area 419 ARCALOCK Spigot Extension works with ARCA-Swiss dovetail rails, in combination with an Area 419 ARCALOCK clamp.\u003c\/p\u003e","brand":"Area 419","offers":[{"title":"Default Title","offer_id":58345971253622,"sku":"ARCALOCK Spigot Extension","price":30.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/area-419-arcalock-spigot-extension-1.jpg?v=1786219707"},{"product_id":"arisaka-picatinny-rail-slider-atlas-bipod","title":"Arisaka Picatinny Rail Slider for Atlas Bipods","description":"\u003cp\u003eThe \u003cb\u003eArisaka Picatinny Rail Slider for Atlas Bipods\u003c\/b\u003e (stock code Picatinny Rail Slider, UPC 850036188452) is a sliding 1913 Picatinny mount for no-clamp Atlas bipods. Instead of bolting the bipod to one fixed slot, it slides freely along the rail and locks wherever you want it with a push-button recoil lug that drops into the nearest cross slot.\u003c\/p\u003e\u003cp\u003eThe point is speed of adjustment. On a long Picatinny forend the best bipod position changes with the position you are shooting from, and a slider lets you move it in a second without tools and without losing recoil retention, because the lug still takes the rearward load through a rail slot rather than through clamping friction.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis is the Picatinny answer. For a fixed Picatinny lever mount, see the \u003ca href=\"\/products\/american-defense-adm-170-s-picatinny-lever-mount-atlas-bipod\"\u003eAmerican Defense ADM-170-S Picatinny lever mount\u003c\/a\u003e. On ARCA-railed rifles you want the \u003ca href=\"\/products\/area-419-arcalock-clamp-atlas-bipod\"\u003eArea 419 ARCALOCK knob clamp\u003c\/a\u003e or the \u003ca href=\"\/products\/area-419-arcalock-qd-clamp-atlas-bipod\"\u003eArea 419 ARCALOCK QD lever clamp\u003c\/a\u003e, and to cover both standards at once the \u003ca href=\"\/products\/area-419-arcalock-dual-clamp-picatinny-atlas-bipod\"\u003eArea 419 ARCALOCK Dual-Clamp with Picatinny\u003c\/a\u003e or the \u003ca href=\"\/products\/really-right-stuff-btc-pro-dual-arca-pic-clamp\"\u003eReally Right Stuff BTC-Pro dual clamp\u003c\/a\u003e. You will need an NC-bodied bipod such as the \u003ca href=\"\/products\/atlas-bipod-bt10-nc-v8-no-clamp\"\u003eAtlas BT10-NC V8\u003c\/a\u003e or \u003ca href=\"\/products\/atlas-bipod-bt47-nc-psr-tall-no-clamp\"\u003eAtlas BT47-NC PSR Tall\u003c\/a\u003e from the \u003ca href=\"\/collections\/atlas-bipods\"\u003eAtlas bipod range\u003c\/a\u003e. See also the full \u003ca href=\"\/collections\/arisaka-defense\"\u003eArisaka range\u003c\/a\u003e and our other \u003ca href=\"\/collections\/bipod-accessories\"\u003ebipod accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePractical and precision rifle competitors repositioning the bipod between stages\u003c\/li\u003e\n\u003cli\u003eLong Picatinny forends where one fixed slot is never the right one\u003c\/li\u003e\n\u003cli\u003eDeer stalkers and vermin controllers shooting from varied improvised positions\u003c\/li\u003e\n\u003cli\u003eOwners of NC \"No Clamp\" Atlas bipods on Picatinny-railed rifles\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eInterface:\u003c\/b\u003e 1913 Picatinny rail, sliding rather than fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAdjustment:\u003c\/b\u003e Multi-position — slides the full length of the rail and locks at any cross slot\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRetention:\u003c\/b\u003e Push-button recoil lug engages a rail slot to resist rearward load\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOperation:\u003c\/b\u003e Tool-free, one-handed repositioning\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFits:\u003c\/b\u003e NC \"No Clamp\" Atlas bipods\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBrand:\u003c\/b\u003e Arisaka, LLC, made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eType\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eSliding multi-position Picatinny rail mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eRail Standard\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e1913 Picatinny\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eLocking\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePush-button recoil lug into a rail cross slot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eNC \"No Clamp\" Atlas bipods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eBrand \/ Origin\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eArisaka, LLC (USA)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eSKU \/ MPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003ePicatinny Rail Slider \/ Picatinny Rail Slider \/ 850036188452\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1 × Arisaka Picatinny rail slider with mounting hardware\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThis mount is UK-stocked and dispatched tracked from our UK warehouse — no import duties and no customs delays — backed by UK-based aftersales support.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich bipods does the Arisaka Picatinny Rail Slider fit?\u003c\/b\u003e\u003cbr\u003eThe Arisaka Picatinny Rail Slider fits NC \"No Clamp\" Atlas bipods, which are supplied by B\u0026amp;T Industries without a mount so that the buyer can choose their own.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhat rail standard does the Arisaka Picatinny Rail Slider need?\u003c\/b\u003e\u003cbr\u003eThe Arisaka Picatinny Rail Slider fits a 1913 Picatinny rail. It is not an ARCA-Swiss clamp, so on an ARCA rail you would use an Area 419 ARCALOCK clamp or a dual ARCA and Picatinny clamp instead.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow does the push-button recoil lug work?\u003c\/b\u003e\u003cbr\u003ePressing the button retracts a spring-loaded lug so the mount slides freely along the rail, and releasing it drops the lug into the nearest Picatinny cross slot, locking the bipod against movement under recoil.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eCan I move the bipod without tools?\u003c\/b\u003e\u003cbr\u003eYes. The Arisaka Picatinny Rail Slider is repositioned by pressing the button and sliding the mount, with no spanners or hex keys required.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhy choose a slider over a fixed lever mount?\u003c\/b\u003e\u003cbr\u003eA slider lets you change the bipod's position on the forend as the shooting position changes, whereas a fixed lever mount such as the American Defense ADM-170-S is quicker to remove entirely but sits in one place while fitted.\u003c\/p\u003e","brand":"Arisaka","offers":[{"title":"Default Title","offer_id":58345971286390,"sku":"Picatinny Rail Slider","price":100.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/arisaka-picatinny-rail-slider-atlas-bipod-1.jpg?v=1786219706"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/collections\/hf_20260727_134231_1ede8387-4bd2-4b8a-af7b-8140b44a3195.png?v=1785160551","url":"https:\/\/xtremetactical.co.uk\/collections\/bipod-accessories.oembed?page=5","provider":"Xtreme Tactical","version":"1.0","type":"link"}