{"title":"Red Dot Mounting Plates \u0026 Adapters","description":"\u003cp\u003eGenuine \u003cb\u003ered dot mounting plates and adapter plates\u003c\/b\u003e for fitting a pistol optic to optics-ready slides — including \u003cb\u003eGlock MOS\u003c\/b\u003e, \u003cb\u003eCZ P-10\u003c\/b\u003e, \u003cb\u003eFN 509\u003c\/b\u003e, FNX-45 Tactical and universal \u003cb\u003e507C\/RMR-cut\u003c\/b\u003e slides, and the airsoft replicas cut to the same patterns. Whether you're mounting a Holosun 509T enclosed optic, a 407K\/507K or an EPS on the K footprint, the right plate gives a solid, correctly-bossed interface with the proper screws included.\u003c\/p\u003e\u003cp\u003eNot sure which cut your slide has? Our \u003ca href=\"\/blogs\/news\/pistol-red-dot-footprint-compatibility-chart\"\u003efootprint compatibility chart\u003c\/a\u003e matches optics to slide cuts in seconds, and the \u003ca href=\"\/blogs\/news\/glock-mos-optic-fitting-guide\"\u003eGlock MOS fitting guide\u003c\/a\u003e covers that system specifically. Browse \u003ca href=\"\/collections\/red-dot-sight-mounts\"\u003eall red dot mounts\u003c\/a\u003e, \u003ca href=\"\/collections\/enclosed-red-dot-sights\"\u003eenclosed red dots\u003c\/a\u003e, \u003ca href=\"\/collections\/rmr-footprint-red-dot-sights\"\u003eRMR-footprint optics\u003c\/a\u003e and \u003ca href=\"\/collections\/rmsc-footprint-red-dot-sights\"\u003eRMSc\/K-footprint optics\u003c\/a\u003e, or read the \u003ca href=\"\/blogs\/news\/rmr-vs-rmsc-footprint\"\u003eRMR vs RMSc guide\u003c\/a\u003e. Every plate is held in UK stock with fast tracked dispatch.\u003c\/p\u003e","products":[{"product_id":"holosun-509-mounting-plate-for-507c-rmr-cut-slides-509plt-507c","title":"Holosun 509 Mounting Plate for 507C\/RMR Cut Slides – 509PLT-507C","description":"\u003cp\u003eThe \u003cb\u003eHolosun 509PLT-507C\u003c\/b\u003e is a genuine Holosun adapter plate that mounts a \u003cb\u003e509T-footprint enclosed red dot sight\u003c\/b\u003e — the HS509T X2, HE509T X2 or HE509T-X2-GD — onto pistol slides cut for the 507C or RMR footprint. The plate and the correct screws for both plate-to-slide and optic-to-plate are supplied together.\u003c\/p\u003e\u003cp\u003eThe 509T uses Holosun's own rear-lug footprint rather than the RMR or RMSc pattern, so it will not bolt straight onto a factory optic cut. This plate is the part that bridges the two.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eFor a Glock MOS host use the \u003ca href=\"\/products\/holosun-509-mounting-plate-for-glock-mos-9mm-509plt-mos9mm\"\u003e509PLT-MOS9MM plate\u003c\/a\u003e, and for a CZ P-10 use the \u003ca href=\"\/products\/holosun-509-mounting-plate-for-cz-p10-509plt-czp10\"\u003e509PLT-CZP10 plate\u003c\/a\u003e. To put a 509T-footprint optic on a rail instead of a slide, see the \u003ca href=\"\/products\/holosun-509t-picatinny-mount-0-82in-low-profile-509mnt-0-82-pic\"\u003e509T Picatinny mount in 0.82in low profile\u003c\/a\u003e. Browse all \u003ca href=\"\/collections\/red-dot-mounting-plates\"\u003ered dot mounting plates\u003c\/a\u003e and \u003ca href=\"\/collections\/enclosed-red-dot-sights\"\u003eenclosed red dot sights\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAirsoft gas blowback pistol builds that use a RMR-cut slide\u003c\/li\u003e\n\u003cli\u003eSection 1 long-barrelled pistols and revolvers built on a RMR-cut pattern\u003c\/li\u003e\n\u003cli\u003eLicensed pistol setups in Northern Ireland and target work overseas\u003c\/li\u003e\n\u003cli\u003eTraining and dry-practice rigs where the optic needs to move between hosts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eOptic Footprint:\u003c\/b\u003e Holosun 509T rear-lug footprint, not RMR and not RMSc\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHost:\u003c\/b\u003e Slides cut for the 507C \/ RMR footprint\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHardware:\u003c\/b\u003e plate-to-slide and optic-to-plate screws supplied\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBuild:\u003c\/b\u003e genuine Holosun part, machined to Holosun's own tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOptic Footprint\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eHolosun 509T footprint (HS509T \/ HE509T)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e507C \/ RMR footprint slide cuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardware\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMounting screws included (plate-to-slide and optic-to-plate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e509PLT-507C \/ 810047071051\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHolosun 509PLT-507C mounting plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide and optic-to-plate mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eCovered by Holosun's manufacturer warranty, handled in the UK by Xtreme Tactical.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eUK-stocked and dispatched tracked from our UK warehouse — no import duties or customs delays — backed by UK-based support and Holosun's warranty.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich optics does the Holosun 509PLT-507C plate fit?\u003c\/b\u003e\u003cbr\u003eThe Holosun 509PLT-507C plate fits optics with the Holosun 509T footprint, which means the HS509T X2, the HE509T X2 and the HE509T-X2-GD. It does not fit RMR-footprint optics such as the 507C or 407C, and it does not fit RMSc-footprint optics such as the 507K or 407K.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich slides does the Holosun 509PLT-507C plate fit?\u003c\/b\u003e\u003cbr\u003eThe Holosun 509PLT-507C plate fits any pistol slide already cut for the 507C or RMR footprint, letting an enclosed 509T optic sit on a slide designed for an open-emitter RMR-pattern sight.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre the mounting screws included with the Holosun 509PLT-507C?\u003c\/b\u003e\u003cbr\u003eYes. The Holosun 509PLT-507C is supplied with both sets of screws — those that fix the plate to the slide, and those that fix the optic to the plate.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the 509T footprint the same as RMR or RMSc?\u003c\/b\u003e\u003cbr\u003eNo. The Holosun 509T uses a rear-lug footprint unique to Holosun's 509 series. RMR is the larger Trijicon pattern used by the 507C and 407C, and RMSc is the smaller Shield pattern used by the 507K and 407K. Our \u003ca href=\"\/blogs\/news\/pistol-red-dot-footprint-compatibility-chart\"\u003epistol red dot footprint compatibility chart\u003c\/a\u003e sets out which optic fits which cut.\u003c\/p\u003e","brand":"Holosun","offers":[{"title":"Default Title","offer_id":58206610194806,"sku":"509PLT-507C","price":44.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/holosun-509-mounting-plate-for-507c-rmr-cut-slides-509plt-507c-1.jpg?v=1785205514"},{"product_id":"holosun-509-mounting-plate-for-cz-p10-509plt-czp10","title":"Holosun 509 Mounting Plate for CZ P10 – 509PLT-CZP10","description":"\u003cp\u003eThe \u003cb\u003eHolosun 509PLT-CZP10\u003c\/b\u003e is a genuine Holosun adapter plate that mounts a \u003cb\u003e509T-footprint enclosed red dot sight\u003c\/b\u003e — the HS509T X2, HE509T X2 or HE509T-X2-GD — onto CZ P-10 optics-ready slides using CZ's factory optic cut. The plate and the correct screws for both plate-to-slide and optic-to-plate are supplied together.\u003c\/p\u003e\u003cp\u003eThe 509T uses Holosun's own rear-lug footprint rather than the RMR or RMSc pattern, so it will not bolt straight onto a factory optic cut. This plate is the part that bridges the two.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eFor a Glock MOS host use the \u003ca href=\"\/products\/holosun-509-mounting-plate-for-glock-mos-9mm-509plt-mos9mm\"\u003e509PLT-MOS9MM plate\u003c\/a\u003e, and for an RMR-cut slide use the \u003ca href=\"\/products\/holosun-509-mounting-plate-for-507c-rmr-cut-slides-509plt-507c\"\u003e509PLT-507C plate\u003c\/a\u003e. If your optic is a K-series rather than a 509T, see the \u003ca href=\"\/products\/holosun-k-mounting-plate-for-cz-p10-c-kplt-czp10c\"\u003eK mounting plate for the CZ P10 C\u003c\/a\u003e. Browse all \u003ca href=\"\/collections\/red-dot-mounting-plates\"\u003ered dot mounting plates\u003c\/a\u003e and \u003ca href=\"\/collections\/enclosed-red-dot-sights\"\u003eenclosed red dot sights\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAirsoft gas blowback pistol builds that use a CZ P-10 slide\u003c\/li\u003e\n\u003cli\u003eSection 1 long-barrelled pistols and revolvers built on a CZ P-10 pattern\u003c\/li\u003e\n\u003cli\u003eLicensed pistol setups in Northern Ireland and target work overseas\u003c\/li\u003e\n\u003cli\u003eTraining and dry-practice rigs where the optic needs to move between hosts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eOptic Footprint:\u003c\/b\u003e Holosun 509T rear-lug footprint, not RMR and not RMSc\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHost:\u003c\/b\u003e CZ P-10 optics-ready slides\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHardware:\u003c\/b\u003e plate-to-slide and optic-to-plate screws supplied\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBuild:\u003c\/b\u003e genuine Holosun part, machined to Holosun's own tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOptic Footprint\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eHolosun 509T footprint (HS509T \/ HE509T)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eCZ P-10 optics-ready slides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardware\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMounting screws included (plate-to-slide and optic-to-plate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e509PLT-CZP10 \/ 810047071006\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHolosun 509PLT-CZP10 mounting plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide and optic-to-plate mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eCovered by Holosun's manufacturer warranty, handled in the UK by Xtreme Tactical.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eUK-stocked and dispatched tracked from our UK warehouse — no import duties or customs delays — backed by UK-based support and Holosun's warranty.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich optics does the Holosun 509PLT-CZP10 plate fit?\u003c\/b\u003e\u003cbr\u003eThe Holosun 509PLT-CZP10 plate fits optics with the Holosun 509T footprint, which means the HS509T X2, the HE509T X2 and the HE509T-X2-GD. It does not fit RMR-footprint optics such as the 507C or 407C, and it does not fit RMSc-footprint optics such as the 507K or 407K.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich slides does the Holosun 509PLT-CZP10 plate fit?\u003c\/b\u003e\u003cbr\u003eThe Holosun 509PLT-CZP10 plate fits CZ P-10 optics-ready slides that use CZ's factory optic cut.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre the mounting screws included with the Holosun 509PLT-CZP10?\u003c\/b\u003e\u003cbr\u003eYes. The Holosun 509PLT-CZP10 is supplied with both sets of screws — those that fix the plate to the slide, and those that fix the optic to the plate.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the 509T footprint the same as RMR or RMSc?\u003c\/b\u003e\u003cbr\u003eNo. The Holosun 509T uses a rear-lug footprint unique to Holosun's 509 series. RMR is the larger Trijicon pattern used by the 507C and 407C, and RMSc is the smaller Shield pattern used by the 507K and 407K. Our \u003ca href=\"\/blogs\/news\/pistol-red-dot-footprint-compatibility-chart\"\u003epistol red dot footprint compatibility chart\u003c\/a\u003e sets out which optic fits which cut.\u003c\/p\u003e","brand":"Holosun","offers":[{"title":"Default Title","offer_id":58206610227574,"sku":"509PLT-CZP10","price":44.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/holosun-509-mounting-plate-for-cz-p10-509plt-czp10-1.jpg?v=1785205516"},{"product_id":"holosun-509-mounting-plate-for-fn-509-tactical-509plt-fn509t","title":"Holosun 509 Mounting Plate for FN 509 Tactical – 509PLT-FN509T","description":"\u003cp\u003eThe \u003cb\u003eHolosun 509PLT-FN509T\u003c\/b\u003e is a genuine Holosun adapter plate that mounts a \u003cb\u003e509T-footprint enclosed red dot sight\u003c\/b\u003e — the HS509T X2, HE509T X2 or HE509T-X2-GD — onto the FN 509 Tactical low-profile optics-mounting system. The plate and the correct screws for both plate-to-slide and optic-to-plate are supplied together.\u003c\/p\u003e\u003cp\u003eThe 509T uses Holosun's own rear-lug footprint rather than the RMR or RMSc pattern, so it will not bolt straight onto a factory optic cut. This plate is the part that bridges the two.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eFor an FNX-45 Tactical use the \u003ca href=\"\/products\/holosun-509-mounting-plate-for-fnx-45-tactical-509plt-fnx45\"\u003e509PLT-FNX45 plate\u003c\/a\u003e, for a Glock MOS use the \u003ca href=\"\/products\/holosun-509-mounting-plate-for-glock-mos-9mm-509plt-mos9mm\"\u003e509PLT-MOS9MM plate\u003c\/a\u003e, and for an RMR-cut slide use the \u003ca href=\"\/products\/holosun-509-mounting-plate-for-507c-rmr-cut-slides-509plt-507c\"\u003e509PLT-507C plate\u003c\/a\u003e. Browse all \u003ca href=\"\/collections\/red-dot-mounting-plates\"\u003ered dot mounting plates\u003c\/a\u003e and \u003ca href=\"\/collections\/enclosed-red-dot-sights\"\u003eenclosed red dot sights\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAirsoft gas blowback pistol builds that use a FN 509 Tactical slide\u003c\/li\u003e\n\u003cli\u003eSection 1 long-barrelled pistols and revolvers built on a FN 509 Tactical pattern\u003c\/li\u003e\n\u003cli\u003eLicensed pistol setups in Northern Ireland and target work overseas\u003c\/li\u003e\n\u003cli\u003eTraining and dry-practice rigs where the optic needs to move between hosts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eOptic Footprint:\u003c\/b\u003e Holosun 509T rear-lug footprint, not RMR and not RMSc\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHost:\u003c\/b\u003e FN 509 Tactical optics-mounting system\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHardware:\u003c\/b\u003e plate-to-slide and optic-to-plate screws supplied\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBuild:\u003c\/b\u003e genuine Holosun part, machined to Holosun's own tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOptic Footprint\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eHolosun 509T footprint (HS509T \/ HE509T)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFN 509 Tactical optics-mounting system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardware\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMounting screws included (plate-to-slide and optic-to-plate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e509PLT-FN509T \/ 810047071037\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHolosun 509PLT-FN509T mounting plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide and optic-to-plate mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eCovered by Holosun's manufacturer warranty, handled in the UK by Xtreme Tactical.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eUK-stocked and dispatched tracked from our UK warehouse — no import duties or customs delays — backed by UK-based support and Holosun's warranty.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich optics does the Holosun 509PLT-FN509T plate fit?\u003c\/b\u003e\u003cbr\u003eThe Holosun 509PLT-FN509T plate fits optics with the Holosun 509T footprint, which means the HS509T X2, the HE509T X2 and the HE509T-X2-GD. It does not fit RMR-footprint optics such as the 507C or 407C, and it does not fit RMSc-footprint optics such as the 507K or 407K.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich slides does the Holosun 509PLT-FN509T plate fit?\u003c\/b\u003e\u003cbr\u003eThe Holosun 509PLT-FN509T plate fits FN 509 Tactical slides using FN's own low-profile optics-mounting system. Check that your pistol carries FN's MRD mounting cut before ordering.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre the mounting screws included with the Holosun 509PLT-FN509T?\u003c\/b\u003e\u003cbr\u003eYes. The Holosun 509PLT-FN509T is supplied with both sets of screws — those that fix the plate to the slide, and those that fix the optic to the plate.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the 509T footprint the same as RMR or RMSc?\u003c\/b\u003e\u003cbr\u003eNo. The Holosun 509T uses a rear-lug footprint unique to Holosun's 509 series. RMR is the larger Trijicon pattern used by the 507C and 407C, and RMSc is the smaller Shield pattern used by the 507K and 407K. Our \u003ca href=\"\/blogs\/news\/pistol-red-dot-footprint-compatibility-chart\"\u003epistol red dot footprint compatibility chart\u003c\/a\u003e sets out which optic fits which cut.\u003c\/p\u003e","brand":"Holosun","offers":[{"title":"Default Title","offer_id":58206610260342,"sku":"509PLT-FN509T","price":44.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/holosun-509-mounting-plate-for-fn-509-tactical-509plt-fn509t-1.jpg?v=1785205517"},{"product_id":"holosun-509-mounting-plate-for-fnx-45-tactical-509plt-fnx45","title":"Holosun 509 Mounting Plate for FNX-45 Tactical – 509PLT-FNX45","description":"\u003cp\u003eThe \u003cb\u003eHolosun 509PLT-FNX45\u003c\/b\u003e is a genuine Holosun adapter plate that mounts a \u003cb\u003e509T-footprint enclosed red dot sight\u003c\/b\u003e — the HS509T X2, HE509T X2 or HE509T-X2-GD — onto FNX-45 Tactical optics-ready slides using FN's factory optic cut. The plate and the correct screws for both plate-to-slide and optic-to-plate are supplied together.\u003c\/p\u003e\u003cp\u003eThe 509T uses Holosun's own rear-lug footprint rather than the RMR or RMSc pattern, so it will not bolt straight onto a factory optic cut. This plate is the part that bridges the two.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eFor an FN 509 Tactical use the \u003ca href=\"\/products\/holosun-509-mounting-plate-for-fn-509-tactical-509plt-fn509t\"\u003e509PLT-FN509T plate\u003c\/a\u003e, for a Glock MOS use the \u003ca href=\"\/products\/holosun-509-mounting-plate-for-glock-mos-9mm-509plt-mos9mm\"\u003e509PLT-MOS9MM plate\u003c\/a\u003e, and for an RMR-cut slide use the \u003ca href=\"\/products\/holosun-509-mounting-plate-for-507c-rmr-cut-slides-509plt-507c\"\u003e509PLT-507C plate\u003c\/a\u003e. Browse all \u003ca href=\"\/collections\/red-dot-mounting-plates\"\u003ered dot mounting plates\u003c\/a\u003e and \u003ca href=\"\/collections\/enclosed-red-dot-sights\"\u003eenclosed red dot sights\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAirsoft gas blowback pistol builds that use a FNX-45 Tactical slide\u003c\/li\u003e\n\u003cli\u003eSection 1 long-barrelled pistols and revolvers built on a FNX-45 Tactical pattern\u003c\/li\u003e\n\u003cli\u003eLicensed pistol setups in Northern Ireland and target work overseas\u003c\/li\u003e\n\u003cli\u003eTraining and dry-practice rigs where the optic needs to move between hosts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eOptic Footprint:\u003c\/b\u003e Holosun 509T rear-lug footprint, not RMR and not RMSc\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHost:\u003c\/b\u003e FNX-45 Tactical optics-ready slides\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHardware:\u003c\/b\u003e plate-to-slide and optic-to-plate screws supplied\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBuild:\u003c\/b\u003e genuine Holosun part, machined to Holosun's own tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOptic Footprint\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eHolosun 509T footprint (HS509T \/ HE509T)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFNX-45 Tactical optics-ready slides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardware\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMounting screws included (plate-to-slide and optic-to-plate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e509PLT-FNX45 \/ 810047071044\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHolosun 509PLT-FNX45 mounting plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide and optic-to-plate mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eCovered by Holosun's manufacturer warranty, handled in the UK by Xtreme Tactical.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eUK-stocked and dispatched tracked from our UK warehouse — no import duties or customs delays — backed by UK-based support and Holosun's warranty.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich optics does the Holosun 509PLT-FNX45 plate fit?\u003c\/b\u003e\u003cbr\u003eThe Holosun 509PLT-FNX45 plate fits optics with the Holosun 509T footprint, which means the HS509T X2, the HE509T X2 and the HE509T-X2-GD. It does not fit RMR-footprint optics such as the 507C or 407C, and it does not fit RMSc-footprint optics such as the 507K or 407K.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich slides does the Holosun 509PLT-FNX45 plate fit?\u003c\/b\u003e\u003cbr\u003eThe Holosun 509PLT-FNX45 plate fits FNX-45 Tactical slides with FN's factory optic cut.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre the mounting screws included with the Holosun 509PLT-FNX45?\u003c\/b\u003e\u003cbr\u003eYes. The Holosun 509PLT-FNX45 is supplied with both sets of screws — those that fix the plate to the slide, and those that fix the optic to the plate.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the 509T footprint the same as RMR or RMSc?\u003c\/b\u003e\u003cbr\u003eNo. The Holosun 509T uses a rear-lug footprint unique to Holosun's 509 series. RMR is the larger Trijicon pattern used by the 507C and 407C, and RMSc is the smaller Shield pattern used by the 507K and 407K. Our \u003ca href=\"\/blogs\/news\/pistol-red-dot-footprint-compatibility-chart\"\u003epistol red dot footprint compatibility chart\u003c\/a\u003e sets out which optic fits which cut.\u003c\/p\u003e","brand":"Holosun","offers":[{"title":"Default Title","offer_id":58206610325878,"sku":"509PLT-FNX45","price":44.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/holosun-509-mounting-plate-for-fnx-45-tactical-509plt-fnx45-1.jpg?v=1785205517"},{"product_id":"holosun-509-mounting-plate-for-glock-mos-9mm-509plt-mos9mm","title":"Holosun 509 Mounting Plate for Glock MOS 9mm – 509PLT-MOS9MM","description":"\u003cp\u003eThe \u003cb\u003eHolosun 509PLT-MOS9MM\u003c\/b\u003e is a genuine Holosun adapter plate that mounts a \u003cb\u003e509T-footprint enclosed red dot sight\u003c\/b\u003e — the HS509T X2, HE509T X2 or HE509T-X2-GD — onto Glock MOS optics-ready slides in 9mm, including the G17, G19, G34 and G45 MOS. The plate and the correct screws for both plate-to-slide and optic-to-plate are supplied together.\u003c\/p\u003e\u003cp\u003eThe 509T uses Holosun's own rear-lug footprint rather than the RMR or RMSc pattern, so it will not bolt straight onto a factory optic cut. This plate is the part that bridges the two.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eFor a CZ P-10 host use the \u003ca href=\"\/products\/holosun-509-mounting-plate-for-cz-p10-509plt-czp10\"\u003e509PLT-CZP10 plate\u003c\/a\u003e, and for an RMR-cut slide use the \u003ca href=\"\/products\/holosun-509-mounting-plate-for-507c-rmr-cut-slides-509plt-507c\"\u003e509PLT-507C plate\u003c\/a\u003e. If your optic is a K-series rather than a 509T, see the \u003ca href=\"\/products\/holosun-k-mounting-plate-for-glock-mos-9mm-kplt-mos9mm\"\u003eK mounting plate for Glock MOS 9mm\u003c\/a\u003e. Our \u003ca href=\"\/blogs\/news\/glock-mos-optic-fitting-guide\"\u003eGlock MOS optic fitting guide\u003c\/a\u003e walks through the whole job.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAirsoft gas blowback pistol builds that use a Glock MOS slide\u003c\/li\u003e\n\u003cli\u003eSection 1 long-barrelled pistols and revolvers built on a Glock MOS pattern\u003c\/li\u003e\n\u003cli\u003eLicensed pistol setups in Northern Ireland and target work overseas\u003c\/li\u003e\n\u003cli\u003eTraining and dry-practice rigs where the optic needs to move between hosts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eOptic Footprint:\u003c\/b\u003e Holosun 509T rear-lug footprint, not RMR and not RMSc\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHost:\u003c\/b\u003e Glock MOS optics-ready slides (9mm models)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHardware:\u003c\/b\u003e plate-to-slide and optic-to-plate screws supplied\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBuild:\u003c\/b\u003e genuine Holosun part, machined to Holosun's own tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOptic Footprint\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eHolosun 509T footprint (HS509T \/ HE509T)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eGlock MOS optics-ready slides, 9mm models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardware\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMounting screws included (plate-to-slide and optic-to-plate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e509PLT-MOS9MM \/ 810047071020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHolosun 509PLT-MOS9MM mounting plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide and optic-to-plate mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eCovered by Holosun's manufacturer warranty, handled in the UK by Xtreme Tactical.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eUK-stocked and dispatched tracked from our UK warehouse — no import duties or customs delays — backed by UK-based support and Holosun's warranty.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich optics does the Holosun 509PLT-MOS9MM plate fit?\u003c\/b\u003e\u003cbr\u003eThe Holosun 509PLT-MOS9MM plate fits optics with the Holosun 509T footprint, which means the HS509T X2, the HE509T X2 and the HE509T-X2-GD. It does not fit RMR-footprint optics such as the 507C or 407C, and it does not fit RMSc-footprint optics such as the 507K or 407K.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich slides does the Holosun 509PLT-MOS9MM plate fit?\u003c\/b\u003e\u003cbr\u003eThe Holosun 509PLT-MOS9MM plate fits Glock MOS optics-ready slides in 9mm that use Glock's standard MOS plate system, including the G17, G19, G34 and G45 MOS.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre the mounting screws included with the Holosun 509PLT-MOS9MM?\u003c\/b\u003e\u003cbr\u003eYes. The Holosun 509PLT-MOS9MM is supplied with both sets of screws — those that fix the plate to the slide, and those that fix the optic to the plate.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the 509T footprint the same as RMR or RMSc?\u003c\/b\u003e\u003cbr\u003eNo. The Holosun 509T uses a rear-lug footprint unique to Holosun's 509 series. RMR is the larger Trijicon pattern used by the 507C and 407C, and RMSc is the smaller Shield pattern used by the 507K and 407K. Our \u003ca href=\"\/blogs\/news\/pistol-red-dot-footprint-compatibility-chart\"\u003epistol red dot footprint compatibility chart\u003c\/a\u003e sets out which optic fits which cut.\u003c\/p\u003e","brand":"Holosun","offers":[{"title":"Default Title","offer_id":58206610358646,"sku":"509PLT-MOS9MM","price":34.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/holosun-509-mounting-plate-for-glock-mos-9mm-509plt-mos9mm-1.jpg?v=1785205520"},{"product_id":"holosun-k-mounting-plate-for-507c-rmr-cut-slides-kplt-507c","title":"Holosun K Mounting Plate for 507C\/RMR Cut Slides – KPLT-507C","description":"\u003cp\u003eThe \u003cb\u003eHolosun KPLT-507C\u003c\/b\u003e is a genuine Holosun adapter plate that mounts a \u003cb\u003eK-footprint optic\u003c\/b\u003e — the 407K X2, 507K X2, EPS or EPS Carry — onto pistol slides cut for the 507C or RMR footprint. Both sets of screws, plate-to-slide and optic-to-plate, are supplied with the plate.\u003c\/p\u003e\u003cp\u003eK-footprint optics use the compact RMSc pattern, which is narrower than the RMR pattern most factory optic cuts are machined for. This plate is the part that bridges the two, so a small enclosed or open sight can sit correctly on a full-size slide.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eFor a Glock MOS host use the \u003ca href=\"\/products\/holosun-k-mounting-plate-for-glock-mos-9mm-kplt-mos9mm\"\u003eKPLT-MOS9MM plate\u003c\/a\u003e, for a CZ P-10 C use the \u003ca href=\"\/products\/holosun-k-mounting-plate-for-cz-p10-c-kplt-czp10c\"\u003eKPLT-CZP10C plate\u003c\/a\u003e, and for an FN 509 use the \u003ca href=\"\/products\/holosun-k-mounting-plate-for-fn-509-kplt-fn509\"\u003eKPLT-FN509 plate\u003c\/a\u003e. If your optic is a 509T rather than a K-series, the \u003ca href=\"\/products\/holosun-509-mounting-plate-for-507c-rmr-cut-slides-509plt-507c\"\u003e509PLT-507C plate\u003c\/a\u003e is the right part. Browse all \u003ca href=\"\/collections\/red-dot-mounting-plates\"\u003ered dot mounting plates\u003c\/a\u003e and \u003ca href=\"\/collections\/rmsc-footprint-red-dot-sights\"\u003eRMSc footprint red dot sights\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAirsoft gas blowback pistol builds on a RMR-cut slide\u003c\/li\u003e\n\u003cli\u003eSection 1 long-barrelled pistols and revolvers built on a RMR-cut pattern\u003c\/li\u003e\n\u003cli\u003eLicensed pistol setups in Northern Ireland and target work overseas\u003c\/li\u003e\n\u003cli\u003eMoving a small K-series optic between hosts without re-machining a slide\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eOptic Footprint:\u003c\/b\u003e Holosun K footprint, the RMSc pattern used by 407K, 507K, EPS and EPS Carry\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHost:\u003c\/b\u003e Slides cut for the 507C \/ RMR footprint\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHardware:\u003c\/b\u003e plate-to-slide and optic-to-plate screws supplied\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBuild:\u003c\/b\u003e genuine Holosun part, machined to Holosun's own tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOptic Footprint\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eHolosun K footprint \/ RMSc pattern (407K, 507K, EPS, EPS Carry)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003e507C \/ RMR footprint slide cuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardware\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMounting screws included (plate-to-slide and optic-to-plate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKPLT-507C \/ 810047071167\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHolosun KPLT-507C mounting plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide and optic-to-plate mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eCovered by Holosun's manufacturer warranty, handled in the UK by Xtreme Tactical.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eUK-stocked and dispatched tracked from our UK warehouse — no import duties or customs delays — backed by UK-based support and Holosun's warranty.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich optics does the Holosun KPLT-507C plate fit?\u003c\/b\u003e\u003cbr\u003eThe Holosun KPLT-507C plate fits optics with the Holosun K footprint, which is the RMSc pattern. That covers the 407K X2, the 507K X2, the EPS and the EPS Carry. It does not fit RMR-footprint optics such as the 507C or 407C, and it does not fit the 509T rear-lug footprint.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich slides does the Holosun KPLT-507C plate fit?\u003c\/b\u003e\u003cbr\u003eThe Holosun KPLT-507C plate fits any pistol slide already cut for the 507C or RMR footprint, letting a narrower K-series optic sit on a slide machined for a larger RMR-pattern sight.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the K footprint the same as RMSc?\u003c\/b\u003e\u003cbr\u003eYes. Holosun's K footprint is the RMSc pattern, the compact two-screw footprint originated by Shield and used across the industry for small pistol optics. Our \u003ca href=\"\/blogs\/news\/rmr-vs-rmsc-footprint\"\u003eRMR versus RMSc footprint guide\u003c\/a\u003e explains the difference in full.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre the mounting screws included with the Holosun KPLT-507C?\u003c\/b\u003e\u003cbr\u003eYes. The Holosun KPLT-507C is supplied with both sets of screws — those that fix the plate to the slide, and those that fix the optic to the plate.\u003c\/p\u003e","brand":"Holosun","offers":[{"title":"Default Title","offer_id":58206610620790,"sku":"KPLT-507C","price":44.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/holosun-k-mounting-plate-for-507c-rmr-cut-slides-kplt-507c-1.jpg?v=1785205579"},{"product_id":"holosun-k-mounting-plate-for-cz-p10-c-kplt-czp10c","title":"Holosun K Mounting Plate for CZ P10 C – KPLT-CZP10C","description":"\u003cp\u003eThe \u003cb\u003eHolosun KPLT-CZP10C\u003c\/b\u003e is a genuine Holosun adapter plate that mounts a \u003cb\u003eK-footprint optic\u003c\/b\u003e — the 407K X2, 507K X2, EPS or EPS Carry — onto CZ P-10 C optics-ready slides using CZ's factory optic cut. Both sets of screws, plate-to-slide and optic-to-plate, are supplied with the plate.\u003c\/p\u003e\u003cp\u003eK-footprint optics use the compact RMSc pattern, which is narrower than the RMR pattern most factory optic cuts are machined for. This plate is the part that bridges the two, so a small enclosed or open sight can sit correctly on a full-size slide.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eFor a Glock MOS host use the \u003ca href=\"\/products\/holosun-k-mounting-plate-for-glock-mos-9mm-kplt-mos9mm\"\u003eKPLT-MOS9MM plate\u003c\/a\u003e, for an FN 509 use the \u003ca href=\"\/products\/holosun-k-mounting-plate-for-fn-509-kplt-fn509\"\u003eKPLT-FN509 plate\u003c\/a\u003e, and for an RMR-cut slide use the \u003ca href=\"\/products\/holosun-k-mounting-plate-for-507c-rmr-cut-slides-kplt-507c\"\u003eKPLT-507C plate\u003c\/a\u003e. If your optic is a 509T rather than a K-series, the \u003ca href=\"\/products\/holosun-509-mounting-plate-for-cz-p10-509plt-czp10\"\u003e509PLT-CZP10 plate\u003c\/a\u003e is the right part. Browse all \u003ca href=\"\/collections\/red-dot-mounting-plates\"\u003ered dot mounting plates\u003c\/a\u003e and \u003ca href=\"\/collections\/rmsc-footprint-red-dot-sights\"\u003eRMSc footprint red dot sights\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAirsoft gas blowback pistol builds on a CZ P-10 C slide\u003c\/li\u003e\n\u003cli\u003eSection 1 long-barrelled pistols and revolvers built on a CZ P-10 C pattern\u003c\/li\u003e\n\u003cli\u003eLicensed pistol setups in Northern Ireland and target work overseas\u003c\/li\u003e\n\u003cli\u003eMoving a small K-series optic between hosts without re-machining a slide\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eOptic Footprint:\u003c\/b\u003e Holosun K footprint, the RMSc pattern used by 407K, 507K, EPS and EPS Carry\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHost:\u003c\/b\u003e CZ P-10 C optics-ready slides\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHardware:\u003c\/b\u003e plate-to-slide and optic-to-plate screws supplied\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBuild:\u003c\/b\u003e genuine Holosun part, machined to Holosun's own tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOptic Footprint\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eHolosun K footprint \/ RMSc pattern (407K, 507K, EPS, EPS Carry)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eCZ P-10 C optics-ready slides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardware\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMounting screws included (plate-to-slide and optic-to-plate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKPLT-CZP10C \/ 810047071129\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHolosun KPLT-CZP10C mounting plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide and optic-to-plate mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eCovered by Holosun's manufacturer warranty, handled in the UK by Xtreme Tactical.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eUK-stocked and dispatched tracked from our UK warehouse — no import duties or customs delays — backed by UK-based support and Holosun's warranty.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich optics does the Holosun KPLT-CZP10C plate fit?\u003c\/b\u003e\u003cbr\u003eThe Holosun KPLT-CZP10C plate fits optics with the Holosun K footprint, which is the RMSc pattern. That covers the 407K X2, the 507K X2, the EPS and the EPS Carry. It does not fit RMR-footprint optics such as the 507C or 407C, and it does not fit the 509T rear-lug footprint.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich slides does the Holosun KPLT-CZP10C plate fit?\u003c\/b\u003e\u003cbr\u003eThe Holosun KPLT-CZP10C plate fits CZ P-10 C optics-ready slides that use CZ's factory optic cut.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the K footprint the same as RMSc?\u003c\/b\u003e\u003cbr\u003eYes. Holosun's K footprint is the RMSc pattern, the compact two-screw footprint originated by Shield and used across the industry for small pistol optics. Our \u003ca href=\"\/blogs\/news\/rmr-vs-rmsc-footprint\"\u003eRMR versus RMSc footprint guide\u003c\/a\u003e explains the difference in full.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre the mounting screws included with the Holosun KPLT-CZP10C?\u003c\/b\u003e\u003cbr\u003eYes. The Holosun KPLT-CZP10C is supplied with both sets of screws — those that fix the plate to the slide, and those that fix the optic to the plate.\u003c\/p\u003e","brand":"Holosun","offers":[{"title":"Default Title","offer_id":58206610653558,"sku":"KPLT-CZP10C","price":44.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/holosun-k-mounting-plate-for-cz-p10-c-kplt-czp10c-1.jpg?v=1785205579"},{"product_id":"holosun-k-mounting-plate-for-fn-509-kplt-fn509","title":"Holosun K Mounting Plate for FN 509 – KPLT-FN509","description":"\u003cp\u003eThe \u003cb\u003eHolosun KPLT-FN509\u003c\/b\u003e is a genuine Holosun adapter plate that mounts a \u003cb\u003eK-footprint optic\u003c\/b\u003e — the 407K X2, 507K X2, EPS or EPS Carry — onto FN 509 optics-ready slides using FN's MRD optic-mounting system. Both sets of screws, plate-to-slide and optic-to-plate, are supplied with the plate.\u003c\/p\u003e\u003cp\u003eK-footprint optics use the compact RMSc pattern, which is narrower than the RMR pattern most factory optic cuts are machined for. This plate is the part that bridges the two, so a small enclosed or open sight can sit correctly on a full-size slide.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eFor a Glock MOS host use the \u003ca href=\"\/products\/holosun-k-mounting-plate-for-glock-mos-9mm-kplt-mos9mm\"\u003eKPLT-MOS9MM plate\u003c\/a\u003e, for a CZ P-10 C use the \u003ca href=\"\/products\/holosun-k-mounting-plate-for-cz-p10-c-kplt-czp10c\"\u003eKPLT-CZP10C plate\u003c\/a\u003e, and for an RMR-cut slide use the \u003ca href=\"\/products\/holosun-k-mounting-plate-for-507c-rmr-cut-slides-kplt-507c\"\u003eKPLT-507C plate\u003c\/a\u003e. If your optic is a 509T rather than a K-series, the \u003ca href=\"\/products\/holosun-509-mounting-plate-for-fn-509-tactical-509plt-fn509t\"\u003e509PLT-FN509T plate\u003c\/a\u003e is the right part. Browse all \u003ca href=\"\/collections\/red-dot-mounting-plates\"\u003ered dot mounting plates\u003c\/a\u003e and \u003ca href=\"\/collections\/rmsc-footprint-red-dot-sights\"\u003eRMSc footprint red dot sights\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAirsoft gas blowback pistol builds on a FN 509 slide\u003c\/li\u003e\n\u003cli\u003eSection 1 long-barrelled pistols and revolvers built on a FN 509 pattern\u003c\/li\u003e\n\u003cli\u003eLicensed pistol setups in Northern Ireland and target work overseas\u003c\/li\u003e\n\u003cli\u003eMoving a small K-series optic between hosts without re-machining a slide\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eOptic Footprint:\u003c\/b\u003e Holosun K footprint, the RMSc pattern used by 407K, 507K, EPS and EPS Carry\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHost:\u003c\/b\u003e FN 509 MRD optics-ready slides\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHardware:\u003c\/b\u003e plate-to-slide and optic-to-plate screws supplied\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBuild:\u003c\/b\u003e genuine Holosun part, machined to Holosun's own tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOptic Footprint\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eHolosun K footprint \/ RMSc pattern (407K, 507K, EPS, EPS Carry)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eFN 509 MRD optics-ready slides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardware\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMounting screws included (plate-to-slide and optic-to-plate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKPLT-FN509 \/ 810047071112\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHolosun KPLT-FN509 mounting plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide and optic-to-plate mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eCovered by Holosun's manufacturer warranty, handled in the UK by Xtreme Tactical.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eUK-stocked and dispatched tracked from our UK warehouse — no import duties or customs delays — backed by UK-based support and Holosun's warranty.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich optics does the Holosun KPLT-FN509 plate fit?\u003c\/b\u003e\u003cbr\u003eThe Holosun KPLT-FN509 plate fits optics with the Holosun K footprint, which is the RMSc pattern. That covers the 407K X2, the 507K X2, the EPS and the EPS Carry. It does not fit RMR-footprint optics such as the 507C or 407C, and it does not fit the 509T rear-lug footprint.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich slides does the Holosun KPLT-FN509 plate fit?\u003c\/b\u003e\u003cbr\u003eThe Holosun KPLT-FN509 plate fits FN 509 models that use FN's MRD optic-mounting system.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the K footprint the same as RMSc?\u003c\/b\u003e\u003cbr\u003eYes. Holosun's K footprint is the RMSc pattern, the compact two-screw footprint originated by Shield and used across the industry for small pistol optics. Our \u003ca href=\"\/blogs\/news\/rmr-vs-rmsc-footprint\"\u003eRMR versus RMSc footprint guide\u003c\/a\u003e explains the difference in full.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre the mounting screws included with the Holosun KPLT-FN509?\u003c\/b\u003e\u003cbr\u003eYes. The Holosun KPLT-FN509 is supplied with both sets of screws — those that fix the plate to the slide, and those that fix the optic to the plate.\u003c\/p\u003e","brand":"Holosun","offers":[{"title":"Default Title","offer_id":58206610686326,"sku":"KPLT-FN509","price":44.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/holosun-k-mounting-plate-for-fn-509-kplt-fn509-1.jpg?v=1785205580"},{"product_id":"holosun-k-mounting-plate-for-glock-mos-9mm-kplt-mos9mm","title":"Holosun K Mounting Plate for Glock MOS 9mm – KPLT-MOS9MM","description":"\u003cp\u003eThe \u003cb\u003eHolosun KPLT-MOS9MM\u003c\/b\u003e is a genuine Holosun adapter plate that mounts a \u003cb\u003eK-footprint optic\u003c\/b\u003e — the 407K X2, 507K X2, EPS or EPS Carry — onto Glock MOS optics-ready slides in 9mm, including the G17, G19, G34 and G45 MOS. Both sets of screws, plate-to-slide and optic-to-plate, are supplied with the plate.\u003c\/p\u003e\u003cp\u003eK-footprint optics use the compact RMSc pattern, which is narrower than the RMR pattern most factory optic cuts are machined for. This plate is the part that bridges the two, so a small enclosed or open sight can sit correctly on a full-size slide.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eHow It Compares\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eFor a CZ P-10 C host use the \u003ca href=\"\/products\/holosun-k-mounting-plate-for-cz-p10-c-kplt-czp10c\"\u003eKPLT-CZP10C plate\u003c\/a\u003e, for an FN 509 use the \u003ca href=\"\/products\/holosun-k-mounting-plate-for-fn-509-kplt-fn509\"\u003eKPLT-FN509 plate\u003c\/a\u003e, and for an RMR-cut slide use the \u003ca href=\"\/products\/holosun-k-mounting-plate-for-507c-rmr-cut-slides-kplt-507c\"\u003eKPLT-507C plate\u003c\/a\u003e. If your optic is a 509T rather than a K-series, the \u003ca href=\"\/products\/holosun-509-mounting-plate-for-glock-mos-9mm-509plt-mos9mm\"\u003e509PLT-MOS9MM plate\u003c\/a\u003e is the right part. Our \u003ca href=\"\/blogs\/news\/glock-mos-optic-fitting-guide\"\u003eGlock MOS optic fitting guide\u003c\/a\u003e walks through the whole job.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIdeal For\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAirsoft gas blowback pistol builds on a Glock MOS slide\u003c\/li\u003e\n\u003cli\u003eSection 1 long-barrelled pistols and revolvers built on a Glock MOS pattern\u003c\/li\u003e\n\u003cli\u003eLicensed pistol setups in Northern Ireland and target work overseas\u003c\/li\u003e\n\u003cli\u003eMoving a small K-series optic between hosts without re-machining a slide\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eKey Features\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eOptic Footprint:\u003c\/b\u003e Holosun K footprint, the RMSc pattern used by 407K, 507K, EPS and EPS Carry\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHost:\u003c\/b\u003e Glock MOS optics-ready slides (9mm models)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHardware:\u003c\/b\u003e plate-to-slide and optic-to-plate screws supplied\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBuild:\u003c\/b\u003e genuine Holosun part, machined to Holosun's own tolerances\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTechnical Specifications\u003c\/b\u003e\u003c\/p\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eOptic Footprint\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eHolosun K footprint \/ RMSc pattern (407K, 507K, EPS, EPS Carry)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eFits\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eGlock MOS optics-ready slides, 9mm models\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eHardware\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eMounting screws included (plate-to-slide and optic-to-plate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cb\u003eMPN \/ UPC\u003c\/b\u003e\u003c\/td\u003e\n\u003ctd\u003eKPLT-MOS9MM \/ 810047071136\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003e\u003cb\u003eWhat's Included\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHolosun KPLT-MOS9MM mounting plate\u003c\/li\u003e\n\u003cli\u003ePlate-to-slide and optic-to-plate mounting screws\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eWarranty\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eCovered by Holosun's manufacturer warranty, handled in the UK by Xtreme Tactical.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eUK Delivery \u0026amp; Support\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eUK-stocked and dispatched tracked from our UK warehouse — no import duties or customs delays — backed by UK-based support and Holosun's warranty.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFrequently Asked Questions\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich optics does the Holosun KPLT-MOS9MM plate fit?\u003c\/b\u003e\u003cbr\u003eThe Holosun KPLT-MOS9MM plate fits optics with the Holosun K footprint, which is the RMSc pattern. That covers the 407K X2, the 507K X2, the EPS and the EPS Carry. It does not fit RMR-footprint optics such as the 507C or 407C, and it does not fit the 509T rear-lug footprint.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eWhich slides does the Holosun KPLT-MOS9MM plate fit?\u003c\/b\u003e\u003cbr\u003eThe Holosun KPLT-MOS9MM plate fits Glock MOS optics-ready slides in 9mm that use Glock's standard MOS plate system, including the G17, G19, G34 and G45 MOS.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIs the K footprint the same as RMSc?\u003c\/b\u003e\u003cbr\u003eYes. Holosun's K footprint is the RMSc pattern, the compact two-screw footprint originated by Shield and used across the industry for small pistol optics. Our \u003ca href=\"\/blogs\/news\/rmr-vs-rmsc-footprint\"\u003eRMR versus RMSc footprint guide\u003c\/a\u003e explains the difference in full.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eAre the mounting screws included with the Holosun KPLT-MOS9MM?\u003c\/b\u003e\u003cbr\u003eYes. The Holosun KPLT-MOS9MM is supplied with both sets of screws — those that fix the plate to the slide, and those that fix the optic to the plate.\u003c\/p\u003e","brand":"Holosun","offers":[{"title":"Default Title","offer_id":58206610719094,"sku":"KPLT-MOS9MM","price":44.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/files\/holosun-k-mounting-plate-for-glock-mos-9mm-kplt-mos9mm-1.jpg?v=1785205580"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0337\/3216\/5771\/collections\/hf_20260727_134846_b02920e3-da78-4fd5-9a87-39fc9a69a88c.png?v=1785160663","url":"https:\/\/xtremetactical.co.uk\/collections\/red-dot-mounting-plates.oembed","provider":"Xtreme Tactical","version":"1.0","type":"link"}