Burris AR-P.E.P.R. 30mm Picatinny Fixed Scope Mount – 410341

The Burris AR-P.E.P.R. 30mm Picatinny Fixed Scope Mount (410341) is a one-piece cantilever scope mount for 30mm scope tubes, holding the optic at a 1.60in (40.6 mm) optical centreline over any Picatinny rail. P.E.P.R. stands for Proper Eye Position Ready — the cantilever pushes the scope up to 2 inches (51 mm) forward so you can set correct eye relief on a flat-top receiver, where a receiver-mounted ring set would sit too far back.

It uses cross-bolt clamps for a permanent, no-fuss fit, and it ships with two sets of ring tops: smooth tops for a clean build, and Picatinny-slotted tops if you want to mount a small accessory above the scope. It weighs 8.7 oz (247 g).

How It Compares

Closest alternatives: Burris AR-P.E.P.R. 30mm Picatinny QD scope mount (410342), Burris AR-P.E.P.R. 1-inch Picatinny scope mount, Burris AR-P.E.P.R. 34mm Picatinny scope mount. If you want Burris's Signature polymer inserts and 5–40 MOA of cant built into the mount, see the Burris AR-Signature P.E.P.R. quick-detach scope mount. Browse the full Burris scope mount and ring range, all rifle scope mounts, or optics for AR-pattern and flat-top rifles.

Ideal For

• Straight-pull and practical or service rifle work on a flat-top Picatinny receiver, where the scope has to sit forward of the charging handle
• Target and gallery rifle set-ups needing a repeatable, one-piece mounting platform
• Builds where the receiver rail alone will not give correct eye relief
• Running a small accessory above the scope — Picatinny-slotted ring tops are supplied as well as smooth ones
• Mounting a 30mm LPVO rifle scope on a flat-top rifle

Key Features

• Tube Diameter: 30mm — integral rings, no separate rings needed
• Mount Type: One-piece cantilever, Picatinny — Fixed
• Optical Centreline Height: 1.60in (40.6 mm) from the rail to the centre of the scope tube
• Forward Positioning: Up to 2 inches (51 mm) for correct eye relief
• Ring Tops: Two sets supplied — smooth, and Picatinny-slotted for a small accessory
• Weight: 8.7 oz (247 g)
• Warranty: Burris Signature Warranty

Technical Specifications

What's Included

• Burris AR-P.E.P.R. 30mm Picatinny Fixed scope mount (410341)
• Two sets of ring tops — smooth and Picatinny-slotted
• Fitting hardware and instructions

Warranty

Burris back this with their Signature Warranty — no charge, no receipt, for life. It covers the mount against defects in materials and workmanship, is fully transferable, and needs no registration.

UK Delivery & Support

UK-stocked and dispatched tracked from our UK warehouse — no import duties or customs delays. Backed by UK-based aftersales support and the Burris Signature Warranty (formerly the Forever Warranty; the name changed in December 2025, the lifetime cover did not). International warranty claims are handled through us as your retailer, so you deal with a UK company rather than shipping to the US.

Frequently Asked Questions

What does P.E.P.R. mean on the Burris AR-P.E.P.R. 410341?
Proper Eye Position Ready. The cantilever moves the scope forward — up to 2 inches (51 mm) — so you can set correct eye relief on a flat-top rifle instead of being stuck with wherever the receiver puts the rings.

Is the Burris AR-P.E.P.R. 410341 the fixed or quick-detach version?
410341 is the Fixed 30mm model. It clamps on with cross-bolts and is meant to stay put.

What scope tube diameter does the Burris AR-P.E.P.R. 410341 fit?
It has integral 30mm rings, so it fits scopes with a 30mm main tube only. Burris makes the AR-P.E.P.R. in 1 Inch, 30mm and 34mm.

How high does the Burris AR-P.E.P.R. 410341 hold the scope?
The optical centreline sits 1.60in (40.6 mm) above the rail, measured from the rail surface to the centre of the scope tube.

Can I fit accessories on top of the Burris AR-P.E.P.R.?
Yes. Two sets of ring tops are supplied — smooth for a clean build, and Picatinny-slotted for mounting a small accessory above the scope.

What torque should I use on the Burris AR-P.E.P.R.?
Burris specifies the cross-bolts to 65 in-lb (7.3 Nm) first, then the ring tops to 20 in-lb (2.3 Nm), alternating screws in an even pattern.