The Accu-Tac Sling Stud Rail Adapter, part number SSRA-200, converts a standard rifle sling stud into a Picatinny 1913 / NATO 4694 rail section 2.8″ (71 mm) long, so any Accu-Tac bipod can be fitted to a sporter stock.
How It Compares
Most British stalking rifles leave the factory with a sling stud and no rail, which is exactly the gap this fills. It bolts to the stud and presents a short Picatinny section, so a Picatinny-clamp bipod such as the Accu-Tac BR-4 G2 Picatinny QD bipod or Accu-Tac HT-10 Picatinny hunting bipod goes straight on. If your bipod is one of the Arca-Spec models, use the Accu-Tac Arca Sling Stud Rail Adapter instead. To add a rail elsewhere on the stock, see the Accu-Tac Picatinny Rail Mount. Browse bipod rails, clamps and adapters and the full Accu-Tac collection.
Ideal For
- Deer stalking rifles with a sporter stock and a front sling stud but no rail
- Fitting a Picatinny-clamp bipod to a wooden or synthetic hunting stock
- Moving one bipod between a chassis rifle and a stalking rifle
- Any rifle where drilling for a rail is not an option
Key Features
-
Function: Turns a standard front sling stud into a Picatinny rail section
-
Rail interface: Picatinny 1913 / NATO 4694
-
Size: 2.8″ (71 mm) long × 1.4″ (36 mm) wide
-
Compatibility: All Accu-Tac bipods with a Picatinny clamp
-
Construction: 6061-T6 aluminium with stainless-steel hardware
-
Finish: Type III MIL-SPEC hard-anodise, flat black
-
Weight: 0.5 oz (14 g)
Technical Specifications
| Material |
6061-T6 aluminium; stainless-steel hardware |
| Finish |
Type III MIL-SPEC hard-anodise (flat black) |
| Rail Interface |
Picatinny 1913 / NATO 4694 |
| Overall Length |
2.8″ (71 mm) |
| Overall Width |
1.4″ (36 mm) |
| Weight |
0.5 oz (14 g) |
| Compatibility |
All Accu-Tac bipods |
| Installation Hardware |
Steel locking pin (Ø 1/8″ × 3/4″, 3.2 × 19 mm); 7/8″ (22 mm) aluminium nut |
| Country of Origin |
USA |
| Brand |
Accu-Tac (USA) |
| SKU / MPN / UPC |
SSRA-200 / SSRA-200 / 858520006206 |
What's Included
- Sling Stud Rail Adapter
- Steel locking pin
- 7/8″ aluminium nut
- Installation instructions
Warranty
Covered by the Accu-Tac Limited Warranty against defects in materials and workmanship.
UK Delivery & Support
Every order is dispatched tracked from our UK warehouse, so there are no import duties or customs surprises, and you are backed by UK-based aftersales support from our team.
Frequently Asked Questions
What does the Accu-Tac Sling Stud Rail Adapter do?
It bolts to a standard front sling stud and presents a Picatinny 1913 / NATO 4694 rail section, so a Picatinny-clamp bipod can be fitted to a stock that has no rail.
Which bipods work with the Accu-Tac Sling Stud Rail Adapter?
Any Accu-Tac bipod with a Picatinny clamp. For Arca-Spec bipods use the Accu-Tac Arca Sling Stud Rail Adapter (ASSRA-300) instead.
How long is the rail on the Accu-Tac Sling Stud Rail Adapter?
The adapter is 2.8″ (71 mm) long and 1.4″ (36 mm) wide.
What hardware is supplied with the Accu-Tac Sling Stud Rail Adapter?
A steel locking pin (Ø 1/8″ × 3/4″, 3.2 × 19 mm) and a 7/8″ (22 mm) aluminium nut.
How much does the Accu-Tac Sling Stud Rail Adapter weigh?
It weighs 0.5 oz (14 g).
